SUITU TPMS-M2

Contents

SUITU Motorcycle TPMS User Manual

Real-time Tire Pressure Monitoring System with External Sensors

1. Product Overview

The SUITU Motorcycle TPMS (Tire Pressure Monitoring System) is designed to provide real-time monitoring of your motorcycle's tire pressure and temperature. This system enhances riding safety by alerting you to abnormal tire conditions, such as high pressure, low pressure, or high temperature.

Key Features:

  • Real-time display of tire pressure and temperature.
  • High precision: 0.01 BAR pressure accuracy, ±2°C temperature accuracy.
  • Automatic start/stop function based on motorcycle vibration to save battery.
  • Built-in explosion-proof lithium battery with USB charging.
  • Waterproof and dustproof design for various weather conditions.
  • Easy installation with external sensors.
SUITU Motorcycle TPMS components: monitor, two external sensors, USB charging cable, and mounting bracket.
Figure 1: Product Components Overview
Diagram showing auto start/stop feature, 3-second data update, 0.01 BAR pressure precision, and +/- 2 degree Celsius temperature precision.
Figure 2: System Features and Precision

2. Package Contents

Please check the package contents upon receipt:

  • 1x TPMS Receiver (Monitor)
  • 2x External Sensors (Front & Rear)
  • 1x USB Power Cable
  • 1x Holder (Mounting Bracket)
  • 2x Anti-proof Nuts
  • 1x Spanner
Exploded view of the TPMS kit showing the receiver, two external sensors, USB power cable, holder, two anti-proof nuts, and a spanner.
Figure 3: Package Contents

3. Setup and Installation

3.1 Monitor Installation

The monitor can be easily installed on your motorcycle's handlebar using the provided holder.

  1. Attach the holder securely to your motorcycle's handlebar.
  2. Mount the TPMS receiver onto the holder, ensuring it is firmly in place and visible for easy reading during operation.
Examples of the TPMS monitor installed on different motorcycle handlebars using the provided mounting bracket.
Figure 4: Monitor Installation Examples

3.2 External Sensor Installation

The external sensors are designed for quick and secure attachment to your tire valve stems.

  1. Unscrew the original valve cap from the tire valve stem.
  2. Screw the anti-theft nut onto the valve stem, but do not tighten it yet.
  3. Screw the designated sensor (FRONT for front wheel, REAR for rear wheel) onto the valve stem until it is hand-tight.
  4. Slide the anti-theft nut up against the sensor and tighten it using the provided spanner. This prevents unauthorized removal of the sensor.

Note: The sensor batteries are pre-installed. Avoid disassembling the sensors unless battery replacement is necessary.

3.3 Initial Charging

Before first use, ensure the monitor is fully charged. Use the provided USB cable to connect the monitor to a USB power source.

  • A full charge typically takes about one hour.
  • The monitor features a built-in explosion-proof lithium battery.
Diagram showing the USB charging port on the monitor and the USB power cable, emphasizing the built-in lithium battery.
Figure 5: USB Charging Details

4. Operating Instructions

4.1 Power On/Off

  • Power On: Long press the left button (Mode/Set) for 3-6 seconds.
  • Power Off: Long press the left button (Mode/Set) for 3-6 seconds.
  • Automatic Operation: The display will start working automatically as the motorcycle starts (detects vibration) and will auto power off without operation after a few minutes to save battery.

4.2 Display Introduction

The monitor's LCD screen provides comprehensive information at a glance:

Diagram labeling the TPMS monitor display elements: Alarm indicator, Time display, Power display, Pressure unit, Front tire pressure, Rear tire pressure, Front tire temperature, Rear tire temperature.
Figure 6: Monitor Display Layout
  • Time Display: Shows current time (PM/AM, 12/24 hour format).
  • Alarm Indicator: Lights up when an alarm condition is met.
  • Power Display: Indicates the monitor's battery level.
  • Pressure Unit: Displays the selected pressure unit (BAR or PSI).
  • Front/Rear Tire Pressure: Shows the real-time pressure for each tire.
  • Front/Rear Tire Temperature: Shows the real-time temperature for each tire.

4.3 Parameter Settings

To enter settings mode, short press the left button (Mode/Set). Use the right button (Up/Unit) to adjust values and the left button to confirm and move to the next setting.

  1. Time Setting: Adjust the current time and 12/24 hour format.
  2. Temperature Unit Setting: Switch between Celsius (°C) and Fahrenheit (°F).
  3. Pressure Unit Setting: Switch between BAR and PSI.
  4. Front Tire Pressure Alarm Value Setting: Set the high and low pressure thresholds for the front tire. Default high pressure is 2.40 BAR.
  5. Rear Tire Pressure Alarm Value Setting: Set the high and low pressure thresholds for the rear tire. Default high pressure is 2.40 BAR.
  6. High Temperature Alarm Value Setting: Set the maximum allowable temperature for tires. Default limit is 55°C.
  7. Tire Matching: If sensors need to be re-paired or replaced, follow the on-screen instructions in this mode.

4.4 Alarm Indications

The system will provide visual and audible alerts for the following conditions:

  • High Pressure Alarm: Tire pressure exceeds the set high limit.
  • Low Pressure Alarm: Tire pressure falls below the set low limit.
  • High Temperature Alarm: Tire temperature exceeds the set high limit.
  • Sensor Battery Low: Indicates that a sensor's battery is running low.
  • Host Battery Low: Indicates the monitor's battery is low.
  • Sensor Failure Alarm: Indicates a problem with a sensor.

5. Maintenance

5.1 External Sensor Battery Replacement

The external sensors use CR1632 button cell batteries. When a sensor battery is low, replace it as follows:

  1. Unscrew the sensor cap.
  2. Carefully remove the rubber gasket.
  3. Extract the internal core component.
  4. Replace the old CR1632 battery with a new one, ensuring correct polarity.
  5. Reassemble the sensor, making sure the gasket is properly seated to maintain waterproof integrity.

5.2 Monitor Charging

Recharge the monitor's built-in lithium battery using the provided USB cable when the power display indicates low battery. A full charge provides extended operation.

The TPMS monitor partially submerged in water, demonstrating its waterproof capabilities.
Figure 7: Waterproof Design

6. Troubleshooting

  • Display not turning on: Ensure the monitor is charged. Long press the left button for 3-6 seconds to power on. If the motorcycle is stationary, the monitor might be in auto-off mode; it should activate with vibration.
  • No pressure/temperature readings: Check if sensors are correctly installed and tightened. Ensure sensors are paired with the monitor (refer to 'Tire Matching' in settings). If a sensor battery is low, replace it.
  • Inaccurate readings: Verify that the sensors are installed on the correct tires (FRONT/REAR). Ensure the pressure unit (BAR/PSI) is set correctly in the monitor's settings.
  • 'Bars are sparkling' / Intermittent readings: This could indicate a weak signal or a sensor issue. Ensure the monitor is mounted in a clear line of sight to the sensors if possible. Check sensor battery.
  • System not activating with movement: The system relies on vibration to activate. Ensure the motorcycle is moving for a few seconds. If it still doesn't activate, check the monitor's battery.

For more detailed troubleshooting, please refer to the full user manual PDF.

7. Specifications

Feature Specification
Brand Name SUITU
Model TPMS-M2
Item Type Alarm Systems & Security
Material ABS
Voltage 2.1 - 3.5V
Item Weight 0.2 kg
Item Height 27 mm
Item Width 48 mm
Item Length 48 mm
Certification CE
Monitor Package Dimensions (L x W x H) 11 cm x 8 cm x 7 cm
Monitor Package Weight 0.23 kg

7.1 External Sensor Specifications

Feature Specification
Working Temperature -40℃ to 100℃
Working Humidity 100%
Battery Type CR1632
Battery Capacity 120mA
Working Current 16mA
Pressure Range 0 - 8 BAR
Temperature Range -40℃ to 100℃

8. User Tips

  • Battery Life: The monitor's battery can last for several days on a single charge, especially with the auto start/stop feature. Charge it fully before long trips.
  • Durability: The system is designed to withstand long rides, including off-road conditions, and accurately detects changes due to tire temperature differences.
  • Setup Patience: While installation is generally easy, take your time with the button presses for initial setup and parameter adjustments, as the instructions might have small print.
  • Versatile Use: This TPMS is suitable not only for motorcycles but also works effectively on electric scooters.
  • Waterproof: The device features a waterproof design, making it suitable for various weather conditions.

9. Frequently Asked Questions (FAQ)

Q: Is the device waterproof?
A: Yes, the SUITU TPMS is designed to be waterproof and dustproof.
Q: Is the battery in the tire sensor interchangeable?
A: Yes, the external sensors use replaceable CR1632 button cell batteries. Refer to Section 5.1 for replacement instructions.
Q: How is the system activated? Does it need to rotate to be activated?
A: The system activates automatically with vibration/movement of the motorcycle. It may not work on a static air pressure tank as it requires movement to trigger the sensors and display.
Q: How do I change the pressure unit from PSI to BAR (or vice versa)?
A: You can change the pressure unit in the monitor's parameter settings. Refer to Section 4.3, 'Pressure Unit Setting'.

10. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format is available for download, which may contain additional languages and detailed diagrams:

View User Manual (PDF)

Please note: This product is intended for motorcycle use (12V). Do not rely solely on this product for tire safety; always perform regular manual checks of tire pressure and condition. Do not operate the device while driving.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.