AILEHKUO Phone Tripod Instruction Manual

1. Product Information

This manual provides instructions for the AILEHKUO Phone Tripod, Model A0579A11. This versatile tripod is designed for stable video recording and photography with smartphones, DSLR cameras, GoPro, and projectors.

Key Features:

• Extendable height from 33cm to 102cm (13 inches to 40 inches).
• Lightweight aluminum alloy construction.
• 3-way panhead with 180° tilt and 360° swivel for panoramic shots.
• Standard 1/4" screw for camera compatibility.
• Adjustable phone mount (2.16-3.93 inches).
• Built-in bubble level indicator for precise leveling.
• Non-slip rubber feet for stability.
• Includes a Bluetooth remote for convenient photo and video capture.
• Maximum load capacity: 2KG (4.4 lbs).

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

▲Warning:

• Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Do not use this product for purposes other than its intended use.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• Do not expose to high temperature or pressure.

3. Setup Guide

3.1. Unpacking and Preparation

Carefully unpack the tripod and all accessories. Verify that all components are present and undamaged. The package should include the tripod, phone mount, and Bluetooth remote.

User Tip: Upon receiving your package, inspect the box for any damage and ensure all parts are present before discarding packaging.

3.2. Tripod Assembly

1. **Extend Legs**: Release the leg locks and extend the tripod legs to your desired height. Ensure each section is securely locked.
2. **Adjust Center Column**: Loosen the neck extension locking knob and extend the center column if additional height is needed. Tighten the knob to secure.
3. **Attach Phone Mount/Camera**: The tripod head features a standard 1/4" screw. Attach your camera directly or screw on the provided phone mount.
4. **Secure Device**: If using the phone mount, expand it to fit your smartphone and ensure it is held firmly.

Figure 3.1: Tripod with phone mount and remote, showing compact and extended configurations.

Figure 3.2: Detailed parts diagram of the tripod head and base components.

4. Operating Instructions

4.1. Adjusting Height and Angle

The tripod offers flexible adjustments for optimal positioning:

• **Leg Extension**: Use the quick-release leg locks to extend or retract each leg section. Ensure all locks are firmly closed for stability.
• **Neck Extension**: Loosen the central column lock knob to raise or lower the center column. Tighten the knob once the desired height is reached.
• **Panhead Adjustments**: The 3-way panhead allows for precise camera positioning:
  • **180° Rotation**: Loosen the handle to tilt your device forward or backward.
  • **90° Rotation**: Adjust the side knob to rotate your device to a vertical orientation.
  • **360° Swivel**: The entire panhead can rotate 360° for panoramic shots. Loosen the base knob, adjust, and tighten.
• **Leveling**: Use the built-in bubble level indicator on the tripod head to ensure your device is perfectly level before shooting.

Figure 4.1: Tripod height extension options.

Figure 4.2: Tripod adjustment instructions for rotation and extension.

4.2. Bluetooth Remote Control Pairing

The included Bluetooth remote allows you to trigger your device's camera remotely.

1. **Power On**: Turn on the remote control using the ON/OFF switch. The indicator light will flash.
2. **Pair**: On your smartphone, go to Bluetooth settings and search for new devices.
3. **Connect**: Select 'AB Shutter3' (or similar name) from the list of available devices to pair. The indicator light on the remote will stop flashing once connected.
4. **Shoot**: Open your camera app. Press the appropriate button on the remote (iOS or Android) to take photos or start/stop video recording.

Figure 4.3: Bluetooth remote pairing steps.

5. Maintenance

To ensure the longevity and optimal performance of your AILEHKUO Phone Tripod, follow these maintenance guidelines:

• **Cleaning**: Wipe down the tripod with a soft, dry cloth after each use to remove dust and dirt. For stubborn grime, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals.
• **Storage**: Store the tripod in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided carry bag for protection during transport and storage.
• **Lubrication**: Periodically check moving parts like leg locks and panhead mechanisms. If they become stiff, apply a small amount of silicone-based lubricant.
• **Inspection**: Regularly inspect all parts for wear and tear, loose screws, or damage. Tighten any loose screws and replace damaged parts if necessary.

6. Troubleshooting

• **Tripod is unstable**: Ensure all leg sections are fully extended and their locks are securely fastened. Verify the center column lock is tight. Place the tripod on a flat, stable surface. Distribute the weight of your device evenly.
• **Device not fitting in phone mount**: The phone mount is adjustable and supports devices from 2.16 to 3.93 inches wide. Gently expand the mount to fit your device. Do not force it if your device is outside this range.
• **Bluetooth remote not connecting**: Make sure the remote is powered on and fully charged (if applicable). Ensure Bluetooth is enabled on your smartphone and the remote is within range. Try unpairing and re-pairing the remote in your phone's Bluetooth settings.
• **Camera not responding to remote**: Check if the remote is successfully paired. Ensure your camera app is open and active. Some camera apps may require specific settings to work with Bluetooth remotes.

7. Specifications

8. Warranty & Support

For product support, please contact the manufacturer or authorized representative:

Manufacturer:

Name: Shenzhen Ailehui Technology Co., Ltd
Address: 4F, Yuehua Garden Building, Xuefu Community, Nanshan District, Shenzhen, Guangdong Province, China
Contact: fgh15863@163.com

EU Authorized Representative:

Name: SUCCESS COURIER SL
Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
Contact: successservice2@hotmail.com

This product complies with all applicable requirements of the EU General Product Safety Regulation (EU) 2023/988 (GPSR). A comprehensive risk assessment has been completed to ensure the safety and compliance of the product during normal use.

Technical documents are kept for 10 years from the date the product is put on the market to ensure product traceability.

A detailed user manual in PDF format is also available. You can view it at the following link: AILEHKUO Phone Tripod User Manual (PDF)

9. Disposal Notice

Dispose of this product according to EU Waste Electrical and Electronic Equipment (WEEE) Directive and local recycling regulations. Do not dispose of with general household waste.