1. Introduction
This manual provides essential information for the safe and correct installation, operation, and maintenance of your RACBOX Exterior Sliding Door Handle. Please read all instructions carefully before proceeding with installation or use.

2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord (if applicable) out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Specifications
| Feature | Detail |
|---|---|
| Product Name | Exterior Door Handle |
| Model Identifier | 166 |
| Item Type | Door Handles |
| Origin | Mainland China |
| Compatibility | Ford Transit mk6/7 Van VH VJ VM (2000-2013) |
| Approx. Package Length | 15 cm |
| Approx. Package Width | 10 cm |
| Approx. Package Height | 10 cm |
| Approx. Package Weight | 0.42 kg |
4. Setup & Installation
Follow these steps for proper installation of the sliding door handle:
- Carefully pry off the existing door trim.
- Locate and remove any screws securing the old handle assembly.
- Gently peel off the waterproof membrane to access the handle mechanism.
- Take out the old handle.
- Clean the area where the new handle will be installed, ensuring it is free from debris and old adhesive.
- Install the new handle, aligning it correctly with the mounting points.
- Tighten the screws to secure the new handle.
- Reassemble the door trim and waterproof membrane.



5. Operating the Handle
The sliding door handle operates as a direct replacement for your vehicle's original handle. To open the door, grasp the handle and pull outwards. To close the door, push it shut until it latches securely.

6. Maintenance
To ensure the longevity and proper function of your door handle:
- Regularly clean the handle with a soft cloth and mild automotive cleaner.
- Avoid using abrasive cleaners or solvents that could damage the finish.
- Periodically check the mounting screws for tightness and re-tighten if necessary.
7. Troubleshooting
If the handle malfunctions after installation:
- Recheck the installation steps to ensure all components are correctly fitted and secured.
- If the issue persists, consult a professional automotive technician for assistance.
8. User Tips
- Before starting installation, ensure you have all necessary tools, such as screwdrivers and trim removal tools.
- Double-check the compatibility of the handle with your specific Ford Transit model year before beginning the installation process.
- When removing door trim, use plastic trim removal tools to avoid scratching or damaging interior panels.
9. Compliance Information
This product is a replacement accessory intended for the normal replacement and upgrade of the original car part. It is not designed for illegal modification or use. It conforms to the car accessory industry standards of the European Union and target export regions. There are no design violations or nonconformities. This product is suitable for production, sales, export, and road driving according to law, having undergone strict quality testing before leaving the factory to ensure qualification.
10. Manufacturer & EU Representative Information
Manufacturer:
Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No.1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com
EU Authorized Representative:
APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com