AVATTO DMS16/ZDMS16

Contents

AVATTO Smart Dimmer Switch Module User Manual

Models: DMS16 / ZDMS16 (WiFi & ZigBee Versions)

1. Introduction

The AVATTO Smart Dimmer Switch Module allows you to control your lights wirelessly via an app or voice commands, and manually through traditional wall switches. It supports stepless dimming from 0% to 100% to create various lighting atmospheres. This module is available in both Wi-Fi and ZigBee versions, compatible with Tuya Smart Life app, Amazon Alexa, and Google Home.

AVATTO Smart Dimmer Switch Modules

Image: Overview of AVATTO 1-channel and 2-channel Wi-Fi and ZigBee dimmer modules.

2. Setup and Installation

2.1 Safety Warnings

  • Installation must be carried out by a qualified electrician in accordance with local regulations.
  • Keep the device out of reach of children.
  • Keep the device away from water, damp, or hot environments.
  • Install the device away from strong signal sources such as microwave ovens that may cause signal interruption.
  • Obstruction by concrete walls or metallic materials may reduce the effective operation range.
  • Do NOT attempt to disassemble, repair, or modify the device.

2.2 App Installation

Scan the QR codes below or search for "Tuya Smart" or "Smart Life" in your device's app store (App Store for iOS, Google Play for Android) to download the application.

(QR codes for app download are typically provided in the physical manual)

After installation, log in or register your account. Create a family if prompted.

2.3 Wiring Instructions

Before proceeding, turn off the power supply at the circuit breaker.

  1. Turn off the power supply before carrying out any electrical installation work.
  2. Connect wires according to the appropriate wiring diagram for your module type (1-channel or 2-channel, Wi-Fi or ZigBee).
  3. Insert the module into the junction box.
  4. Turn on the power supply and proceed with network configuration.

Note:

  • The "S" terminals (S1, S2) may be left unconnected if no manual control switch is required.
  • For 2-way control, connect the traditional switch to the S1/S2 terminal as shown in the diagram.

Wiring Diagram Example (2-Way Control)

2-Way Control Wiring Diagram

Image: Diagram showing how to wire the dimmer module for a 2-way control function, where two switches control one light. L (Live), N (Neutral), L1 (Load Output), S1 (Switch Input).

Wiring Diagram Example (Wi-Fi 2-Channel)

Video: Demonstrates the wiring for a 2-channel Wi-Fi dimmer module with two light bulbs and a wall switch. The video also shows the app pairing process for both Wi-Fi and ZigBee modules.

2.4 Network Connection (Pairing)

Take your smartphone close to the switch module when configuring, and ensure you have a minimum of 50% Wi-Fi signal.

2.4.1 Wi-Fi Dimmer Module Pairing

  1. After wiring, ensure the module is powered on.
  2. Press and hold the button on the module (or press the traditional dimmer switch connected to the module for 10 seconds) until the indicator light starts flashing rapidly. This indicates the module is in pairing mode.
  3. Open the Tuya Smart / Smart Life app. Ensure Bluetooth is enabled on your phone.
  4. The app should automatically discover the "Dimmer Module". Tap "Add".
  5. Enter your Wi-Fi network name and password (ensure it's a 2.4GHz network).
  6. Follow the on-screen prompts to complete the pairing process.

2.4.2 ZigBee Dimmer Module Pairing

A Tuya ZigBee Hub is required for ZigBee modules.

Zigbee Smart Light Switch Module Setup

Image: Diagram illustrating the setup of a ZigBee Smart Light Switch Module, showing connection to a WiFi Router, Voice Control device, and APP Control via a Tuya ZigBee Hub.

  1. Ensure your ZigBee Gateway is set up and online in the Tuya Smart / Smart Life app.
  2. After wiring, ensure the module is powered on.
  3. Press and hold the button on the module (or press the traditional dimmer switch connected to the module for 10 seconds) until the indicator light starts flashing rapidly. This indicates the module is in pairing mode.
  4. In the Tuya Smart / Smart Life app, navigate to your ZigBee Gateway.
  5. Select "Add sub-device" or "Search device".
  6. The app will discover the "Dimmer Switch". Tap to add it.
  7. Follow the on-screen prompts to complete the pairing process.

3. Operating Instructions

3.1 Manual Control (Traditional Switch)

The dimmer module supports control via a connected traditional wall switch:

  • Short Push (<1s): Toggles the light ON/OFF.
  • Long Push (>1s): Adjusts the brightness level.

Note:

  • Both adjustments made via the app and the push switch can overwrite each other. The last adjustment remains in memory.
  • App control is synchronized with the manual switch.

3.2 App Control

Once paired, you can control the dimmer module through the Tuya Smart / Smart Life app:

  • On/Off: Tap the power icon to turn lights on or off.
  • Stepless Dimming: Use the brightness slider to adjust the light intensity from 0% to 100%.
  • Scene Creation: Set up custom scenes for different moods or times of day.
  • Scheduling: Program lights to turn on/off or dim at specific times.
Stepless Dimming via App

Image: A smartphone displaying the Tuya app interface, showing a brightness slider being used to adjust the dimming of a lamp in a room.

3.3 Voice Control

The module is compatible with popular voice assistants:

  • Amazon Alexa
  • Google Home

Link your Tuya Smart / Smart Life account to your voice assistant app and use commands like "Alexa, turn on the living room light" or "Hey Google, dim the kitchen light to 50%".

4. Maintenance

To ensure optimal performance and longevity of your dimmer module:

  • Keep the device clean and free from dust.
  • Avoid exposing the module to extreme temperatures or humidity.
  • Do not use harsh chemicals or abrasive cleaners.
  • Ensure proper ventilation if installed in an enclosed space.

5. Troubleshooting (FAQ)

Q1: What should I do if I can't configure the switch module?
A: Check if the device is powered on. Ensure your mobile and dimmer module are on the same 2.4GHz Wi-Fi network. Verify internet conditions and the Wi-Fi password entered in the app. Confirm correct wiring.
Q2: What devices can be connected to this Wi-Fi/ZigBee switch module?
A: It supports triac dimming LED lamps or tungsten lamps.
Q3: What happens if the Wi-Fi goes off?
A: You can still control the light with your traditional switch. Once Wi-Fi is active again, the device will automatically reconnect to your network.
Q4: What should I do if I change the Wi-Fi network or password?
A: You will need to re-connect your Wi-Fi/ZigBee dimmer module to the new network according to the app user manual (repeat pairing steps).
Q5: How do I reset the device?
A: Press the traditional dimmer switch (connected to the module) OFF. Then press and hold it for 10 seconds or more until the connected lamp flickers quickly and enters configuration mode.
Q6: My lights are flickering, especially at low brightness levels.
A: This can occur with certain LED bulbs. Ensure your LED bulbs are specifically designed for dimming. Some users report flickering below 50% brightness. You might try different brands of dimmable LED bulbs.
Q7: Does the ZigBee module work with Home Assistant ZHA?
A: Some users report better compatibility with Zigbee2MQTT (Z2M) for Home Assistant setups. If you experience issues with ZHA, consider using Z2M or checking for custom quirks.

6. Specifications

Product Type1-Channel / 2-Channel Wi-Fi / ZigBee Dimmer Module
VoltageAC100-240V 50/60Hz
Max. Load (LED)1-Channel: AC230V 150W (AC120V 80W)
2-Channel: AC230V 2x100W (AC120V 2x60W)
Operation FrequencyWi-Fi: 2.412GHz-2.484GHz
ProtocolWi-Fi: IEEE 802.11b/g/n
ZigBee: IEEE 802.11b/g/n (ZigBee standard)
Operation Temperature-10°C to +40°C
Operation Range<100m (unobstructed)
Dimensions (WxDxH)39 x 39 x 19.4 mm
IP RatingIP20
CertificatesCE, RoHS
Product Size and Specifications

Image: Detailed product dimensions and a summary of technical specifications for the 1-channel ZigBee dimmer module.

7. User Tips

  • Compact Size: The module's small dimensions (39x39x19.4 mm) generally allow it to fit well within standard European 60mm switch boxes or junction boxes.
  • Zigbee2MQTT Compatibility: For Home Assistant users, the ZigBee version of this module is often reported to work seamlessly with Zigbee2MQTT (Z2M).
  • Bulb Selection: To avoid flickering, especially at lower dimming levels, ensure you use high-quality LED bulbs that are explicitly rated as "dimmable."
  • Momentary Switches: If using momentary push-button switches, a short press typically toggles on/off, and a long press adjusts brightness, similar to the manual override function.
  • Stable Connection: During the initial pairing process, keep your smartphone close to the dimmer module and ensure a strong Wi-Fi signal (for Wi-Fi modules) or a stable ZigBee network (for ZigBee modules).

8. Warranty and Support

8.1 Warranty

This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects.

8.2 Support

For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller or AVATTO customer support through your purchase platform.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.