P47 Bluetooth 5.0 Wireless Headphone User Manual

Introduction

Thank you for purchasing the P47 Bluetooth 5.0 Wireless Headphones. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new headphones. Please read it carefully before use and keep it for future reference.

Setup

1. Charging the Headphones

Before first use, ensure your headphones are fully charged.

1. Connect the USB charging cable to the DC5VIN port on the headphones.
2. Connect the other end of the USB cable to a compatible USB power source (e.g., computer USB port, USB wall adapter).
3. The red LED indicator will be steadily on during charging.
4. Once fully charged (approximately 2 hours), the red LED indicator will turn off.

Image: Close-up of the headphone earcup, highlighting the control buttons and charging port.

2. Bluetooth Pairing

Follow these steps to connect your headphones wirelessly to a Bluetooth-enabled device.

1. Power On: Long press the power button for three seconds to turn on the headphones.
2. Pairing Mode: In Wireless mode, the blue LED indicator will flash rapidly, indicating the headphones are ready for pairing.
3. Enable Bluetooth: On your smartphone, tablet, or other device, go to its Bluetooth settings and ensure Bluetooth is enabled.
4. Select Device: Search for "P47" in the list of available Bluetooth devices and select it to connect.
5. Connected: Once successfully paired, the blue LED indicator will flash slowly.

3. Wired Connection (AUX Mode)

You can also use the headphones with a 3.5mm audio cable for a wired connection.

1. Insert a 3.5mm audio line into the AUX LINE IN port on the headphones.
2. The headphones will automatically switch to wired mode.
3. Connect the other end of the audio cable to your audio source (e.g., mobile phone, MP4 player, MP3 player, CD player, PC).
4. In wired mode, the headphone buttons may not function as they do in wireless mode, and control will primarily be from the connected device.

Operating Instructions

1. Power On/Off

• Power On: Long press the power button for three seconds.
• Power Off: Long press the power button for three seconds.

2. Call Management (Wireless Mode)

• Answer Call: When a call comes in, short press the power button.
• Refuse Call: Long press the power button.
• Redial: Continuous push of the power button 2 times to redial the last number.

3. Music Playback

• Play/Pause: Short press the Play/Pause button.
• Next Song: Press the "Next Song" button (>>|).
• Previous Song: Press the "Previous Song" button (<<|).

4. Volume Control

• Increase Volume: Press the "+" button.
• Decrease Volume: Press the "-" button.

5. Mode Switching

• Short press the "M" button to switch between Wireless, MP3, and FM Radio modes.

6. LED Indicator Meanings

• Wireless Mode (Pairing): Blue light flashes rapidly.
• Wireless Mode (Connected): Blue light flashes slowly.
• MP3 Mode (Playing): Blue light flashes slowly.
• FM Mode (Searching): Blue light flashes.
• Charging: Red light is steadily on.
• Fully Charged: Red light turns off.

Maintenance

1. Cleaning

Wipe the headphones with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.

2. Storage

When not in use, fold the headphones for compact storage. Store them in a cool, dry place, away from direct sunlight, dust, and extreme temperatures. Avoid placing heavy objects on top of the headphones.

Image: Folded P47 headphones, showcasing their portability.

3. Battery Care

To prolong the life of the built-in battery, charge the headphones fully before their first use. If the headphones are not used regularly, charge them at least once every three months.

Troubleshooting

Headphones not powering on:

Ensure the headphones are fully charged. Connect them to a power source and check if the red LED lights up, indicating charging.

Cannot pair via Bluetooth:

Make sure the headphones are in pairing mode (blue LED flashing rapidly). Ensure Bluetooth is enabled on your device and it is within 10 meters of the headphones. Try turning both the headphones and your device off and on again.

No sound in wired mode:

Ensure the 3.5mm audio cable is fully inserted into both the headphones and the audio source. Check the volume levels on both the headphones and the connected device.

FM Radio not detecting stations:

FM radio performance can vary based on location and signal strength. Try moving to an area with better reception. Note that FM radio functionality may be limited in some regions or require a stronger signal.

LED blinking constantly:

In Wireless mode, a slow blue flash indicates successful pairing and connection. A rapid blue flash indicates pairing mode. The LED behavior is standard and cannot be turned off.

Uncomfortable fit:

The fit of the headphones may vary by individual. Adjust the headband for optimal comfort.

Damaged packaging upon arrival:

While packaging may sometimes be damaged during transit, inspect the headphones immediately for any physical damage. If the product itself is damaged, please refer to the warranty information or contact customer support.

Specifications

Warranty and Support

For detailed information regarding warranty coverage, technical support, and other product-related inquiries, please refer to the official user manual PDF. This document contains comprehensive information that may not be fully covered in this summary.

You can access the full user manual PDF here: P47 Wireless Headphone User Manual (PDF)

User Tips

• Sound Quality: Many users find the sound quality to be good for the price, with decent bass.
• Comfort: While generally suitable for adults, some users find the fit to be tight or small. Adjust the headband for best comfort.
• Compatibility: These headphones are compatible with various Bluetooth devices, including iPhones (e.g., iPhone 15) and Android phones (e.g., Samsung Galaxy A71). Connectivity with Smart TVs may vary.
• Usage: Ideal for light use or for children.
• Calls: The headphones offer clear voice quality for calls.