TIYPEOR 350MM Acrylic Car Steering Wheel

Contents

TIYPEOR 350MM Acrylic Car Steering Wheel Instruction Manual

Universal 14-inch (350mm) Acrylic Car Steering Wheel for Vehicle Modification

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your new TIYPEOR 350MM Acrylic Car Steering Wheel. Please read this manual thoroughly before installation and use to ensure proper function and safety.

TIYPEOR 350MM Acrylic Car Steering Wheel with iridescent spokes

Figure 1: TIYPEOR 350MM Acrylic Car Steering Wheel with iridescent spokes.

Setup and Installation

Proper installation is crucial for the safe operation of your vehicle. If you are unsure about any steps, please consult a professional mechanic.

1. Opening the Original Steering Wheel

  1. Place the steering wheel in a balanced position.
  2. Disconnect the positive pole of the car battery to prevent electrical hazards.
  3. Carefully remove the cover of the original steering wheel.
  4. Unfix the screws securing the original steering wheel.
  5. Remove the original steering wheel by pulling it in the indicated direction.
Diagram showing steps to remove original steering wheel

Figure 2: Steps for removing the original steering wheel.

Diagram showing parts of the steering wheel and screw fixing

Figure 3: Parts of the steering wheel and screw fixing.

2. Connecting the Steering Wheel

Before installing the new steering wheel, ensure all necessary connections are made.

  1. Fix the chassis (hub adapter) securely to the steering column.
  2. Connect the electrical source for the horn and any other integrated functions.
  3. Fix every part as per the direction indicated in the diagrams.
  4. Secure all screws firmly.
Diagram showing how to fix the chassis and electrical source

Figure 4: Fixing the chassis and electrical source.

3. Installing the New Steering Wheel

Once connections are made, install the new steering wheel onto the hub adapter.

  1. Align the new steering wheel with the hub adapter and install it as shown in Figure 5 (A) and Figure 6 (B).
  2. Ensure all mounting screws are tightened evenly and securely.
  3. Reconnect the positive pole of the car battery.
  4. For safety, double-check the power cord connections and the tightness of all six screws after driving a few miles.
Diagram showing installation of the steering wheel, Figure A

Figure 5: Steering wheel installation diagram (A).

Diagram showing installation of the steering wheel, Figure B

Figure 6: Steering wheel installation diagram (B).

Video 1: Product showcase, demonstrating the steering wheel's appearance and features.

Operating Instructions

Once installed, the steering wheel operates like a standard car steering wheel. Ensure you are familiar with your vehicle's controls and drive safely.

  • The horn button is typically located in the center of the steering wheel.
  • Ensure full range of motion for steering without obstruction.
Back view of the transparent steering wheel showing horn connections

Figure 7: Back view of the steering wheel, highlighting horn connections.

Maintenance

To maintain the appearance and longevity of your acrylic steering wheel:

  • Clean the acrylic surface with a soft, damp cloth and mild soap. Avoid abrasive cleaners or solvents that can scratch or damage the material.
  • Regularly check all mounting screws for tightness to ensure safety.
  • Inspect the horn wiring for any signs of wear or damage.

Troubleshooting

If you encounter issues with your steering wheel, refer to the following common problems and solutions:

Horn Not Functioning

Problem: The horn does not sound when pressed.

Possible Causes & Solutions:

  • Incorrect Wiring: Ensure the horn connection wires are correctly attached to the vehicle's electrical system. Refer to Figure 7 for horn connection points.
  • Loose Connection: Check for any loose or corroded connections at the horn button or the vehicle's wiring harness.
  • Vehicle's Horn System: Verify that your vehicle's horn system (fuse, relay, horn unit) is functioning correctly.

Specifications

FeatureSpecification
Brand NameTIYPEOR
MaterialAcrylic
Item Length350MM (14 Inch)
Item Width350MM
Item Height50MM
Item Weight1.6KG
Placement on VehicleFRONT
Country/Region of ManufactureCHINA
Diagram showing steering wheel dimensions: 345mm length, 70mm depth, 3mm thickness

Figure 8: Detailed dimensions of the steering wheel.

User Tips

  • Many users appreciate the aesthetic appeal of this steering wheel, noting its 'cool' and 'amazing' look.
  • Ensure compatibility with your vehicle's hub adapter before purchase.

Warranty and Support

For any questions or support regarding your TIYPEOR steering wheel, please contact the seller or refer to the official product page for further assistance.

© 2024 TIYPEOR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.