1. Introduction
Thank you for choosing the GRN-FLASHING Universal AC/DC Power Adapter. This adapter is designed to provide a stable power supply for various electronic devices requiring 5V, 9V, 12V, or 24V DC power with current ratings of 1A, 2A, or 3A. It features a versatile 5.5mm x 2.1mm / 5.5mm x 2.5mm DC output interface and is compatible with EU, US, AU, and UK plug types. Please read this manual carefully before use to ensure safe and optimal performance.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
3. Product Overview
The GRN-FLASHING Universal AC/DC Power Adapter is a compact and efficient power solution. It comes with various plug types to suit different regions and offers multiple voltage and current outputs.
The adapter features a self-adapting DC port designed to perfectly fit both 5.5mm x 2.1mm and 5.5mm x 2.5mm power inlets. Ensure your device's DC port matches these dimensions for proper connection.
Different configurations of the adapter are available, offering various voltage and current combinations:
4. Setup Instructions
- Verify Voltage and Current: Before connecting, ensure that the output voltage (5V, 9V, 12V, or 24V) and current (1A, 2A, or 3A) of your specific adapter match the requirements of your electronic device. Using an adapter with incorrect specifications can damage your device.
- Select Correct Plug Type: The adapter is available with EU, US, UK, or AU plug types. Select the appropriate plug for your region.
- Connect to Device: Insert the DC output connector (5.5mm x 2.1mm / 5.5mm x 2.5mm) into your device's power input port. Pay attention to the polarity markings (small arrows, "+" and "-") on both the adapter and your device to ensure correct one-to-one connection.
- Connect to Power Outlet: Plug the AC input plug of the adapter into a compatible wall power outlet.
5. Operating Instructions
Once properly connected, the adapter will supply power to your device. The adapter is suitable for a wide range of applications, including LED strip lights, TVs, security cameras, printers, subwoofers, and routers, provided the voltage, current, and connector size are compatible.
Always ensure that the power requirements of your device do not exceed the maximum output capabilities of the adapter to prevent overheating or damage.
6. Maintenance
- Keep the adapter clean and dry. Avoid exposure to dust, dirt, and moisture.
- Do not disassemble or attempt to repair the adapter yourself. This will void the warranty and may cause electric shock.
- Store the adapter in a cool, dry place when not in use.
- Avoid bending or crimping the power cord excessively to prevent internal wire damage.
7. Troubleshooting
- No Power Output:
- Check if the adapter is securely plugged into both the wall outlet and your device.
- Verify that the wall outlet is functioning correctly by testing it with another device.
- Ensure the adapter's specifications (voltage, current) are compatible with your device.
- Device Not Functioning Correctly:
- Confirm that the output voltage and current of the adapter precisely match your device's requirements. An incorrect amperage (too low or too high) can cause malfunction.
- Check the DC connector size. This adapter supports 5.5mm x 2.1mm and 5.5mm x 2.5mm. Smaller or larger connectors will not work.
- Ensure correct polarity connection (positive to positive, negative to negative).
- Adapter Overheating:
- Unplug the adapter immediately.
- Ensure the device connected does not draw more current than the adapter's maximum output.
- Allow adequate ventilation around the adapter during use.
8. Specifications
| Attribute | Value |
|---|---|
| Product Name | DC connector |
| Model Number | 12-5521/5525 |
| Material | Plastic + Copper |
| Input Voltage | AC 110-240V |
| Output Voltage Options | DC 5V, 9V, 12V, 24V |
| Output Current Options | 1A, 2A, 3A |
| Output Interface | 5.5mm x 2.1mm / 5.5mm x 2.5mm (Self-adapting) |
| Connection Type | Plug In |
| Cable Length | Approximately 0.9m |
| Working Environment Temperature | -40°C to +90°C |
| EU LVD Voltage Compliance | Below 50Vac or 75Vdc |
| High-concerned chemical | None |
| Certifications | CE |
| Package Dimensions (L x W x H) | 10cm x 10cm x 6cm |
| Package Weight | 0.12 kg |
9. User Tips
- Verify Compatibility: Always double-check your device's voltage, current, and DC connector size requirements before purchasing and using the adapter. This is crucial for proper function and to prevent damage.
- LED Strip Lights: This adapter is frequently used and works well with LED strip lights, providing stable power.
- Cable Length: Be aware that the cable length is approximately 0.9m. Plan your setup accordingly, or consider using an extension if needed.
- Value for Money: Many users find this adapter to be good value for its performance.
10. Frequently Asked Questions (FAQ)
- Q: Is this adapter compatible with all electronic devices?
- A: No. This adapter is compatible with devices requiring specific DC voltages (5V, 9V, 12V, 24V) and currents (1A, 2A, 3A), and that use a 5.5mm x 2.1mm or 5.5mm x 2.5mm DC input jack. Always verify your device's power requirements and connector size before use.
11. Compliance & Support
Compliance Information
The GRN-FLASHING Universal AC/DC Power Adapter complies with relevant Union harmonization legislation, including CE certification. For detailed compliance information and standards, please refer to the full user manual PDF.
A comprehensive user manual in PDF format is available for download: View User Manual (PDF)
Manufacturer & EU Representative Information
| Category | Detail |
|---|---|
| Manufacturer: | |
| Name | Shenzhen Lvseshuxing technology Co., LTD |
| Address | 708, Floor 7, Unit 2, Building B, Xinglongfu Chuangke Park, Yousong Road, Yousong Community, Longhua Street, Longhua District, Shenzhen |
| Zip Code | 518110 |
| Contact Person | YiQi Wen |
| Tel | 18820779209 |
| 52680771@qq.com | |
| EU Authorized Representative: | |
| Name | GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA |
| Address | CASTELLANA 9144, 28046 Madrid |
| Contact Person | Jorge Wilson |
| Tel | +34 696313170 |
| compliance.gavimosa@outlook.com |