1. Product Overview
The Zigbee Water Leak Detector is a smart device designed to detect water leaks and floods in your home. It provides real-time alerts to your smartphone via a connected Zigbee gateway, helping you prevent potential water damage in areas like kitchens, bathrooms, and basements.

Figure 1: Front and back view of the Zigbee Water Leak Detector. The device is white, circular, with a water drop icon on the front. It is compatible with Zigbee2mqtt and Home Assistant, and includes a battery.

Figure 2: Close-up view of the Zigbee Water Leak Detector's front face.
2. Setup and Installation
2.1 Unboxing and Initial Setup
The package includes the Zigbee Water Leak Detector and a user manual. The device comes with a battery pre-installed.
Video 1: Product unboxing and connection tutorial, demonstrating how to open the package, view the sensor, and connect it to a Zigbee gateway.
2.2 Network Configuration
To connect your water leak detector to your smart home system, you will need a compatible Zigbee gateway (hub).
- Ensure your Zigbee gateway is powered on and connected to your home network.
- On the water leak detector, long press the device's set button until the indicator light flashes rapidly. This indicates the device has entered network configuration (pairing) mode.
- Open your smart home application (e.g., Tuya Smart, SmartThings, Home Assistant) and initiate the device discovery or 'add device' process.
- Wait for the application to detect and successfully add the water leak detector.
- Once added, you can rename the device and configure its settings within the app.
2.3 Placement
Place the sensor in areas where water leaks are a concern. The device is designed for easy installation without the need for adhesive tape or complex wiring.
- Kitchens: Near sinks, dishwashers, or refrigerators.
- Bathrooms: Near toilets, bathtubs, showers, or under sinks.
- Laundry Rooms: Near washing machines or utility sinks.
- Basements: In areas prone to flooding or near water heaters.

Figure 3: The sensor can be easily placed in a kitchen corner near a sink, or other desired locations.
3. Operating Instructions
The water leak detector operates by sensing water contact at its detection points. When water is detected, it triggers an alarm and sends notifications.
3.1 Leak Detection and Alarms
When water comes into contact with the detection points on the sensor, it will immediately register a water leak event. The device will then:
- Emit an audible alarm at the sensor's location.
- Send an alarm notification to your smartphone via the connected app.

Figure 4: The sensor provides timely message pushes, alerting you via your smartphone when water is detected.
3.2 Principle of Operation

Figure 5: Diagram illustrating the operating principle: When the water level is exceeded, the sensor triggers an induction alarm.
3.3 Intelligent Linkage (Automation)
The Zigbee Water Leak Detector can be integrated into smart home automation routines. For example, it can be linked with other smart devices through your Zigbee gateway:
- Automatic Valve Shut-off: If a smart valve manipulator is connected to your Zigbee gateway, the water leak detector can trigger it to close the main water supply when a leak is detected, preventing further damage.
- Lighting/Sound Alerts: You can set up automations to turn on smart lights or play an alert sound through a smart speaker when a leak is detected.

Figure 6: Intelligent linkage setup: Zigbee water sensor, Zigbee gateway, and a smart valve manipulator can work together to automatically stop water flow upon leak detection.
3.4 App Remote Control
Monitor the status of your water leak detector and receive alerts from anywhere using your smartphone app.

Figure 7: Control and monitor your smart home from your smartphone, including the water leak detector.
4. Maintenance
4.1 Battery Replacement
The device is powered by a CR2032 coin cell battery. When your smartphone app indicates a low battery level for the sensor, it's time to replace it.
- Gently twist the back cover of the sensor counter-clockwise using a coin or a suitable tool until it unlocks.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery, ensuring the positive (+) side is facing up.
- Align the back cover and twist clockwise until it locks securely.
4.2 Cleaning
Wipe the sensor's exterior with a soft, dry cloth as needed. Do not use abrasive cleaners or immerse the device in water.
5. Troubleshooting
- Device not pairing: Ensure your Zigbee gateway is powered on and within range. Long-press the sensor's button until the light flashes rapidly to re-enter pairing mode. Check your app's instructions for adding new Zigbee devices.
- No notifications: Verify that the sensor is properly paired and showing online in your app. Check your app's notification settings and your phone's notification permissions. Ensure the battery is not low.
- False alarms: Ensure the sensor is placed on a dry, stable surface and not in an area where it might accidentally come into contact with moisture (e.g., condensation).
- Low battery indication: Replace the CR2032 battery as soon as possible to ensure continuous protection.
6. Specifications
| Feature | Specification |
|---|---|
| Wireless Connection | Zigbee 3.0 |
| Working Voltage | 3V |
| Battery Type | CR2032 |
| Standby Current | ≤10μA |
| Working Temperature | -10°C to 50°C (14°F to 122°F) |
| Waterproof Rating | IP67 |
| Product Dimensions | 40mm x 40mm |
7. User Tips
- Check Hub Compatibility: Before purchasing or setting up, ensure your existing Zigbee gateway (hub) is compatible with generic Zigbee 3.0 devices. Common compatible hubs include Tuya, SmartThings, Home Assistant (with Zigbee dongle), and Zigbee2mqtt.
- Test Regularly: Periodically test the sensor by placing a small amount of water on its detection points to ensure it triggers alarms and sends notifications correctly.
- Strategic Placement: Consider placing sensors in less obvious but critical areas, such as behind appliances or in the lowest point of a basement floor.
8. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Zigbee Water Leak Detector, please contact the seller or manufacturer directly through your purchase platform. Keep your order details handy for faster assistance.