1. Introduction
The Haozee Smart Zigbee Plug Socket is a smart home device designed to provide intelligent control and energy monitoring for your appliances. It integrates seamlessly with Zigbee-compatible gateways and platforms like Home Assistant and Zigbee2mqtt, allowing for remote control, scheduling, and automation of connected devices. This manual provides detailed instructions for installation, operation, and troubleshooting.
For a downloadable PDF version of this manual, please refer to the official user manual (PDF).
2. Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Do not disassemble or modify the device.
- Do not expose the device to water or high humidity.
- Do not use the device in environments with flammable gases or liquids.
- Ensure the connected appliance's power consumption does not exceed the maximum current rating of 16A (3680W).
- Keep out of reach of children.
- Unplug the device from the power outlet before cleaning.
3. Package Contents
Verify that all components are present:
- Haozee Smart Zigbee Plug Socket
- User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Input Voltage | 85~250VAC, 50/60Hz |
| Maximum Current | 16A |
| Overload Protection | 16A |
| Maximum Power | 3680W |
| Standby Power | 0.5W |
| Working Temperature | 0°C~40°C (32°F ~ 104°F) |
| Working Humidity | 20%~85% non-condensing |
| Wireless Range | 55m |
| Wireless Frequency | 2.4GHz |
| Communication Protocol | Zigbee 3.0 |
| Networking Protocol | Zigbee IEEE 802.15.4 |
| Product Size (V2) | 46mm x 46mm x 71mm (approx. 8.5cm x 5cm x 5cm) |
5. Setup Guide
Follow these steps to install and configure your Smart Zigbee Plug Socket.
5.1. Physical Installation
- Insert the plug pins of the Smart Zigbee Plug Socket into a standard EU wall socket.
- Ensure the plug is securely seated.
- Turn on the wall socket switch (if applicable).
5.2. App Download and Registration
- Download the "Smart Life" app from the Apple App Store or Google Play Store to your mobile device.
- Launch the "Smart Life" app.
- If you are a new user, register by entering your phone number or email address and creating a password.
- If you already have an account, simply log in.
5.3. Adding Zigbee Controller (Gateway)
The Smart Zigbee Plug Socket requires a Zigbee gateway (controller) to function. If you do not have one, you must add a Tuya Zigbee controller first. Please refer to your Zigbee controller's user manual for specific instructions on adding it to the Smart Life app. Note that there are wired and wireless versions of controllers.
5.4. Adding Sub-device (Smart Plug)
Once your Zigbee controller is set up in the Smart Life app, you can add the Smart Plug as a sub-device:
- Ensure the Smart Plug is powered on. The LED indicator should be flashing quickly (2 times/second), indicating it is in waiting configuration mode. If not, long press the on/off button for 5-7 seconds to reset it.
- In the Smart Life app, navigate to your Zigbee gateway.
- Select "Add device" or "Search device" within the gateway's interface.
- The app will search for nearby Zigbee devices. Once the Smart Plug is detected, follow the on-screen prompts to add it.
- Upon successful addition, the main user interface for the Smart Plug will be displayed in the app.
6. Operation
6.1. Indicator Status
- Waiting Configuration Mode: LED flashes quickly (2 times/second). This is the default state when first powered on or after a reset.
- On/Off: The LED indicator will be on or off, reflecting the power status of the plug.
6.2. Basic On/Off Control
- Manual Control: Press the physical on/off button on the plug to toggle power to the connected appliance.
- App Control: Use the Smart Life app to remotely turn the plug on or off.
6.3. Advanced Features (via Smart Life App)
The Smart Life app provides various advanced functionalities:
- On/Off Status Display: View the current power status of the plug.
- Countdown Timer: Set a countdown for the plug to turn on or off.
- Timing Switch: Schedule specific times for the plug to turn on or off.
- Cyclic Timing: Set repetitive on/off schedules.
- Random Timing: Create random on/off schedules for security purposes.
- Power Meter: Monitor real-time power consumption (e.g., 2.07 kWh shown in diagram).
- Settings: Access additional settings like On/off log, Power status, Light Mode, and Child Lock.
6.4. Voice Control
The plug supports voice control through Amazon Alexa and Google Assistant when integrated with a compatible Zigbee gateway and smart home platform.
6.5. Remote Control
Control your appliances from anywhere using the Smart Life app on your smartphone.
6.6. Power-off Memory Function
The device retains its previous settings when power is lost. When power is restored, it will automatically recover to its last state.
6.7. Other Functions
- Linkage Alarm Setting: Connect with other sensors via scene settings for automated actions.
- Device Sharing: Allow other users to control the device through the app.
- Push Notification: Enable or disable push notifications for device status changes.
- Remove Device: To remove the device from the app and restore default settings, delete it from the app and then add it again to clear its record.
7. Maintenance
- Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the device is unplugged before cleaning.
- Avoid blocking the ventilation holes (if any) to prevent overheating.
8. Troubleshooting
- Q: The plug cannot be set up with the Smart Life app.
- A: Ensure your Zigbee gateway is properly configured and connected. Try resetting the smart plug by long-pressing the on/off button for 5-7 seconds until the LED flashes quickly. Then attempt to add it again in the app.
- Q: The timer function does not work correctly (e.g., timer jumps to 2 minutes).
- A: This may indicate a firmware or app-specific issue. Ensure your Smart Life app and the plug's firmware are up to date. If the problem persists, try resetting the device and re-adding it. If the issue continues, contact customer support.
- Q: Does the device work with Philips Hue?
- A: While the plug uses Zigbee, direct compatibility with Philips Hue bridges can vary. It is primarily designed for Tuya Zigbee gateways and platforms like Home Assistant (via Zigbee2mqtt). Some users report success, but it's not officially guaranteed for all Zigbee hubs.
- Q: Which colors have energy monitoring?
- A: All versions (V1 and V2, regardless of color) of the Haozee Smart Zigbee Plug Socket are advertised to include power energy monitoring functionality, accessible through the Smart Life or Tuya app.
- Q: Does this device also work as a Zigbee signal repeater?
- A: Yes, the Haozee Smart Zigbee Plug Socket functions as a Zigbee router (repeater), extending your Zigbee network's range and strengthening the signal for other Zigbee devices.
- Q: I hear a high-frequency whine from the plug.
- A: Some users have reported a high-frequency whine, particularly with newer models. If this occurs, discontinue use and contact customer support. This could indicate a manufacturing defect.
- Q: Power consumption display is not available in SmartThings or Apple Home.
- A: When integrated with SmartThings or Apple Home, the plug might only support basic on/off control. The power consumption display is typically available within the native Smart Life or Tuya app.
9. User Tips
- Many users find this plug very easy to set up and integrate with Home Assistant and Zigbee2mqtt, often working flawlessly.
- The Zigbee relay function is a useful feature for extending your Zigbee network.
- Consider using it for low-power appliances if you have concerns about maximum amperage, although it is rated for 16A.
- The plug's physical size might be slightly larger than some other smart plugs.
10. Warranty and Support
For warranty information and technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
11. Compliance
This device complies with CE and FC standards, indicating conformity with health, safety, and environmental protection standards for products sold within the European Economic Area and electromagnetic compatibility standards in the United States.
Powered by Tuya
CE FC