YLYD LED Turn Signal Lights for Honda CRF/CB/CBR Series

Contents

YLYD LED Turn Signal Lights Instruction Manual

Model: LED Turn Signal Lights for Honda CRF/CB/CBR Series

Brand: YLYD

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your new YLYD LED Turn Signal Lights. These high-quality LED indicators are designed to enhance visibility and replace original turn signals on various Honda motorcycle models. Please read this manual thoroughly before installation and use.

2. Safety & Warnings

  • WARNING: Always wear gloves to protect your hands during installation!
  • WARNING: Always use appropriate tools!
  • WARNING: Read all instructions before use. Failure to follow these instructions may result in product damage or personal injury.
  • WARNING: Use appropriate bolt safety devices! Use lubricant for screws and bolts.
  • WARNING: After installation, ensure all screws, nuts, pins, etc., are correctly and securely installed and tightened to the appropriate torque (refer to the motorcycle's original manufacturer's service manual), and test to ensure stability and safety!
  • WARNING: If you are unsure how to operate or install, please have it installed and maintained by a professional auto repair shop.
  • WARNING: We are not responsible for any damage caused by improper operation.
  • Do not use this product for any purpose other than its intended use.
  • Please follow the installation and operation guidelines.

3. Specifications

Feature Detail
Item Type Turn Signal Light
Material ABS Plastic Housing + PC Lens + LED bulbs
LED Light Color Amber
Lens Color Options Clear, Smoke Gray (Transparent)
Working Voltage 12V / 1-2W
Position Front or Rear
Connection System 2 wires (manual connection required)
Battery Included No
High-concerned chemical None
Origin Mainland China
Package Dimensions (approx.) Length: 23 cm, Width: 18 cm, Height: 4 cm
Package Weight (approx.) 0.18 kg

4. Compatibility (Fitment)

These LED Turn Signal Lights are designed for various Honda motorcycle models. Please confirm compatibility with your specific model and year before installation. This product is an original replacement.

Compatible Honda Models:

  • CRF250L 2021 - 2023 (Front)
  • CRF250L Rally 2017 - 2023 (Front)
  • CRF300L 2021 - 2023 (Front)
  • CRF300L Rally 2021 - 2023 (Front)
  • CRF450L 2019 - 2023
  • CB750 Hornet 2023 - 2024
  • XL750 Transalp 2023 - 2024
  • X-ADV 750 2017 - 2023
  • ADV 150 2019 - 2022
  • ADV 160 2021 - 2023
  • ADV350 2022 - 2024
  • XRE 300 2017 - 2023
  • RS150
  • RS-X 150
  • FORZA 750 2021 - 2023 (Rear only)
  • CB125R 2019 - 2023
  • CB150R 2018 - 2023
  • CB250R 2019 - 2023
  • CB300R 2019 - 2023
  • CB650R 2019 - 2024
  • CB1000R 2018 - 2023
  • CB1100RS 2017 - 2023
  • CRF1000L AFRICA TWIN 1000 2018 - 2019
  • CRF1100L AFRICA TWIN 1100 2020 - 2022
  • CBR150R 2016 - 2023
  • CBR250RR 2017 - 2023
  • CBR400R 2019 - 2022
  • CBR500R 2019 - 2023
  • CBR650R 2019 - 2024
  • CBR600RR 2021 - 2023
  • CBR600RR 2007 - 2012
  • CBR1000RR 2020 - 2023
  • CBR1000RR-R 2020 - 2022 (Rear only)
  • CB400X 2019 - 2023
  • CB500X 2019 - 2023
  • CB500F 2019 - 2023
  • NC750X 2019 - 2023
  • CB1300 SUPER FOUR 2019 - 2023
  • CB1300 SUPER BOLDOR 2019 - 2023
  • Rebel CMX300 2019 - 2022
  • Rebel CMX500 2019 - 2022
  • MSX125 GROM /SF 2013 - 2020

5. Setup & Installation

Installation is designed to be straightforward, often a direct bolt-on replacement. However, a 2-wire connection system requires manual wiring. If you are not confident in performing the installation yourself, it is highly recommended to seek assistance from a professional auto repair shop.

General Installation Steps:

  1. Preparation: Ensure your motorcycle is turned off and the battery is disconnected to prevent electrical shorts. Gather necessary tools (e.g., wrenches, screwdrivers, wire strippers, crimpers).
  2. Remove Old Turn Signals: Carefully unbolt and disconnect the wiring from your existing turn signals. Note the wiring configuration (typically two wires: positive and ground).
  3. Mount New Turn Signals: Position the new YLYD LED Turn Signal Lights in the desired front or rear location. Secure them using appropriate bolts and ensure they are firmly attached. For some models, you may need to use the original turn signal stem stay.
  4. Wire Connection: The new turn signals use a 2-wire connection system. Connect the positive wire of the LED turn signal to the positive wire of your motorcycle's turn signal circuit, and the ground wire to the motorcycle's ground. Ensure connections are secure and insulated (e.g., using heat shrink tubing or electrical tape).
  5. Test Functionality: Reconnect the battery. Turn on your motorcycle and test the new turn signals. Ensure they flash correctly and are clearly visible. If hyper-flashing occurs, a load resistor may be required (not included).
  6. Final Check: Double-check all connections and mounting points for tightness and security before riding.

Refer to the images below for visual guidance on the product and typical installation points.

YLYD LED Turn Signal Lights product overview and installed examples
Figure 1: Product overview and examples of installed turn signals (front and rear).
Clear lens turn signals with wiring
Figure 2: Clear lens turn signals showing the two-wire connection for installation.
Motorcycle front view with red circles indicating turn signal mounting points
Figure 3: Typical front mounting locations for turn signals on a motorcycle.
Installed clear lens turn signal on a motorcycle front
Figure 4: Example of a clear lens turn signal installed on the front of a motorcycle.
Installed clear lens turn signal on a motorcycle rear
Figure 5: Example of a clear lens turn signal installed on the rear of a motorcycle.
Motorcycle front view with turn signals illuminated
Figure 6: Illuminated turn signals demonstrating amber light output.

6. Operating Instructions

These LED turn signal lights function identically to your motorcycle's original turn signals. Once properly installed and wired, they will activate when you engage your motorcycle's turn signal switch. The amber LED light will flash to indicate your intended direction.

  • Activating Turn Signals: Use your motorcycle's standard turn signal switch to activate the left or right indicator.
  • Canceling Turn Signals: Use your motorcycle's standard turn signal cancel button or switch to turn off the indicator.
  • Visibility: Ensure the turn signals are clean and unobstructed for maximum visibility to other road users.

7. Maintenance

The YLYD LED Turn Signal Lights are designed for durability and long-lasting performance with minimal maintenance. Follow these guidelines to ensure their longevity:

  • Cleaning: Clean the lens and housing regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the plastic.
  • Inspection: Periodically check the mounting bolts and wiring connections to ensure they remain tight and secure. Vibrations from riding can sometimes loosen components.
  • Wiring: Inspect the wiring for any signs of wear, fraying, or damage. Repair or replace damaged wiring immediately to prevent electrical issues.
  • Waterproofing: While designed to be waterproof, avoid directing high-pressure water sprays directly at the lights during washing, especially at the wire entry points.

8. Troubleshooting

If you encounter issues with your LED Turn Signal Lights, refer to the following common problems and solutions:

Problem Possible Cause Solution
Lights do not turn on Loose or incorrect wiring connection, blown fuse, faulty LED. Check all wiring connections for proper polarity and tightness. Inspect motorcycle fuse box. If wiring is correct, the LED may be faulty and require replacement.
Lights flash too fast (Hyper-flashing) LED lights draw less power than incandescent bulbs, causing the flasher relay to interpret it as a burnt-out bulb. Install an LED-compatible flasher relay or load resistors (not included) in parallel with each LED turn signal.
Lights flash too slow or inconsistently Poor electrical connection, low voltage, incompatible flasher relay. Check battery voltage and all wiring connections. Ensure the flasher relay is compatible with LED lights.
One light works, the other doesn't Faulty wiring to the non-working light, faulty LED. Inspect wiring for the non-working light. Test the light directly with a 12V power source to confirm if the LED itself is faulty.

If troubleshooting steps do not resolve the issue, please contact customer support or consult a professional motorcycle mechanic.

9. User Tips

  • Pre-fitment Check: Before final installation, temporarily connect the lights to your motorcycle's power source to ensure they function correctly.
  • Wire Management: Route wiring carefully to avoid pinching, chafing, or exposure to excessive heat or moving parts. Use zip ties to secure loose wires.
  • Visibility Enhancement: Consider pairing these LED turn signals with other LED lighting upgrades for improved overall visibility on the road.
  • Local Regulations: Always ensure your motorcycle's lighting conforms to local traffic laws and regulations.

10. Warranty & Support

For any questions regarding the product, installation, or warranty, please contact the manufacturer or their authorized representative.

Manufacturer Information:

  • Company Name: Guangzhoushi Heigou Trading Co., Ltd.
  • Full Address: Room 301, 3rd Floor, Building C, Jinhua Industrial Zone, No.45, Songbei Songgang East Road, Songzhou Street, Baiyun District, Guangzhou City, Guangdong Province, China.
  • Email: 18922703534@163.com
  • Phone: 86-81797370

EU Authorized Representative:

  • AR Company Name: MJCM SARL
  • Full Address: 78 Avenue des Champs Elysees Bureau, 326, PARIS, FR (France)
  • Email: mjcm190928@gmail.com
  • Telephone: 33-767213611

This product meets EU production standards. For a detailed PDF version of the product manual, you may refer to the official documentation provided by the seller: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.