XIAOMI BE7000

Contents

Xiaomi Mi Router BE7000 User Manual

This manual provides detailed instructions for setting up, operating, and troubleshooting your Xiaomi Mi Router BE7000. Please read carefully before use.

1. Product Overview

The Xiaomi Mi Router BE7000 is a high-performance tri-band WiFi 7 router designed to provide fast and stable internet connectivity for your home or office. It features advanced technologies such as 4K QAM, 160MHz bandwidth, and Mesh networking support to ensure wide coverage and low latency.

Xiaomi Mi Router BE7000
Figure 1: Xiaomi Mi Router BE7000
Xiaomi Mi Router BE7000 Key Features
Figure 2: Key features including Qualcomm enterprise chip, 2.5G network ports, 8-channel signal amplifier, and 1GB large memory.

1.1 Package Contents

Please check the package for the following items:

Packaging List Diagram
Figure 3: Diagram showing the router, specification document, network cable, and power adapter.
  • Xiaomi Mi Router BE7000
  • Power Adapter
  • Network Cable
  • User Manual (Specification Document)

1.2 Router Components

Familiarize yourself with the ports and indicators on your router:

Router Port Diagram
Figure 4: Router diagram highlighting NFC, 2.5G network ports, USB 3.0 port, MESH/RESET button, and Power port.
Serial Number Name Purpose
1 NFC For Android phones to quickly connect to router Wi-Fi. Requires NFC function on phone to be enabled and screen lit up.
2 2.5G network port A network port with a maximum rate of 2.5 Gbps, available as a WAN port or LAN port (automatic identification).
3 USB 3.0 port A port that supports the highest USB 3.0 protocol and can be used for external devices such as portable hard drives or USB sticks.
4 MESH/RESET button Short press (MESH button) for networking with a router that supports the Xiaomi Mesh feature. Hold down for more than 5 seconds (RESET button) to restore factory settings.
5 Power port For connecting the power adapter.

2. Setup Guide

2.1 Connecting the Wires

Follow these steps to connect your router:

  1. Power on the router.
  2. Connect any of the router's network ports to the wall socket or the LAN port of your optical network terminal (ONT)/broadband modem.
  3. If an ONT/broadband modem is not provided by your broadband operator, directly connect the incoming network cable to any of the LAN ports on the back of the router.
Router Wiring Diagram
Figure 5: Diagram illustrating how to connect the router to a wall network port or modem and power.

2.2 Internet Access Configuration

After connecting the wires, proceed with the software setup:

  1. Connect to Wi-Fi: Use your mobile phone or computer to connect to the router's Wi-Fi network. The Wi-Fi name (SSID) is typically found on the router's nameplate and does not require a password for initial connection.
  2. Access Setup Page: The device should automatically redirect you to the internet access guide page. If not, open a web browser and navigate to miwifi.com.
  3. Wi-Fi Connection and miwifi.com Interface
    Figure 6: Steps to connect to the router's Wi-Fi and access the setup page via miwifi.com.
  4. Enter Broadband Details: Enter the account and password provided by your broadband operator. Click "Next". (This step may be skipped depending on your internet access method.) If you forget your broadband account password, contact your operator.
  5. Broadband Account Setup
    Figure 7: Interface for entering broadband account and password.
  6. Set Wi-Fi and Management Password: Set a new Wi-Fi password and a management password for the router. You can choose to use the same password for both.
  7. New Wi-Fi Password Setup
    Figure 8: Interface for setting new Wi-Fi and router administration passwords.

After Wi-Fi configuration, the Wi-Fi module will restart. If Wi-Fi is not immediately found, search again after a short period.

3. Operation

3.1 Indicator Lights

The router features various indicator lights to show its status:

Indicator Status Description
Network indicator (INTERNET) Extinguish The network cable is not plugged into the network port.
Orange Light (Steady on) The network cable is connected, but the upper-level network is not detected.
White Light (Steady on) The network cable is connected, and the upper-level network is normal.
Network indicator (INTERNET) White Light (Slow blinking) A paired Mesh sub-router is found (once per second).
White Light (Quick blinking) The Mesh router is being paired (twice per second).
SYSTEM Indicator (SYSTEM) Extinguish Unconnected power.
Orange Light (Blinking) System upgrade underway.
Orange Light (Steady on, then white) System is starting up (white after ~1 minute), then faulty (if orange for >2 minutes).
White Light (Steady on) It is operating normally.
Smooth Connection function indicator Extinguish Smooth Connect function off.
White Light (Steady on) FreeConnect function is on.
White Light (Blinking) An unpaired IoT device is detected or password change is synchronizing.
Network port indicator Off The network port is not physically connected.
Green The network port is physically connected.

3.2 Mi Home APP Management

For an enhanced experience and easier management, it is recommended to use the Mi Home APP.

  1. Connect your phone to the router's Wi-Fi.
  2. Open the Mi Home app and log in with your Xiaomi account. If you don't have the app, scan the QR code below or search for "Mi Home APP" in your app store.
  3. QR Code for Mi Home APP
    Figure 9: QR code to download the Mi Home APP.
  4. Follow the prompts within the app to complete the binding process for your router.

3.3 Xiaomi Mesh Networking

To extend your network coverage over a larger area, you can set up a Mesh network with multiple Xiaomi routers that support this feature.

Prerequisites:

  • Ensure your main router (BE7000) has completed the internet access configuration, and both front indicator lights are constantly white.
  • The sub-router(s) must be in an unconfigured state. If previously configured, press and hold the RESET button for more than 5 seconds to restore factory settings.

Operation Process:

There are several methods to set up Mesh networking:

  1. Method One (Recommended - Mi Home APP):
    • Use the Mi Home APP to add and bind the main router.
    • Navigate to the router management interface, click on "Mesh Network Devices".
    • Follow the in-app prompts to add Mesh sub-routers.
  2. Method Two (Wireless Mesh):
    • Briefly press the MESH button on the main router.
    • The network indicator lights (INTERNET) of both the main and sub-routers will start to flash rapidly (twice per second), indicating the start of the wireless Mesh networking process.
  3. Method Three (Wired Mesh):
    • Connect the LAN port of the main router (or any available port if no dedicated LAN port) to the WAN port of the sub-router (or any available port if no dedicated WAN port) using an Ethernet cable.
    • The network indicator light (INTERNET) on both routers will start to flash rapidly (twice per second), signifying that they are establishing a wired Mesh network.
Mesh Networking Diagram
Figure 10: Diagram illustrating wired Mesh networking between a primary and secondary router.

During Mesh networking, a fast flashing white light on the sub-router indicates the process is ongoing. A constantly lit white light indicates successful networking.

4. Troubleshooting (Q&A)

4.1 Common Issues and Solutions

  1. Why can't I access the internet even after completing the setup steps?
    • Confirm you can find the router's Wi-Fi network on your mobile phone. If not, ensure the router is powered on and has completed its startup.
    • Connect to the router's Wi-Fi and visit miwifi.com. Try to fix the issue according to the network diagnosis results.
  2. How can I restore the router to its factory settings?
    • Ensure the router has completed its startup.
    • Press and hold the RESET button on the router for more than 5 seconds.
    • Release the RESET key when the SYSTEM indicator light turns orange.
    • After the router restarts, the reset is complete. Note: This will revert to factory settings, requiring you to reconfigure the router.
  3. What should I do if I forget the router's administrative password?
    • If no special settings were made, the management password is the same as the Wi-Fi password. Try logging in with your Wi-Fi password.
    • If the problem persists, it is recommended to restore the router to factory settings and set up the internet connection again.

4.2 Router Performance Failure Table

Issue Category Performance Glitches
Startup Issues
  • After startup, the indicator shows orange steady on for more than two minutes without changing.
  • After the product is powered on, it cannot be started or the indicator light is not bright.
Wireless Router Functionality
  • Function keys of the product do not work properly.
  • The Internet cannot be set after the product is started.
  • The product cannot connect to Wi-Fi after startup.

5. User Tips

  • Firmware Language: The router's administration interface may initially be in Chinese. You can often use your web browser's built-in translation feature to navigate and configure settings.
  • VPN Support: The Xiaomi Mi Router BE7000 supports VPN functionality, allowing for secure network connections.
  • Coverage: With 8 independent signal amplifiers and Mesh support, this router is designed to cover large areas, including multi-story homes.
  • SIM Card: This router does not have a SIM card slot and requires a wired internet connection (e.g., from a modem or ONT).
  • Dual-Band Operation: The router supports simultaneous operation of 2.4G and 5G Wi-Fi bands.

6. Specifications

Feature Specification
Brand Name XIAOMI
Model BE7000 (XiaoMi Model: 7000)
Type Wired Router
Wi-Fi Transmission Standard 802.11n, 802.11a (WiFi 7 capable)
Wireless Communication Standard 802.11.a
Wi-Fi Supported Frequency 2.4G & 5G (Tri-Band)
2.4G Wi-Fi Transmission Rate 400Mbps
5G Wi-Fi Transmission Rate 2167Mbps
Wireless Transmission Rate 7000Mbps (Total)
Wired Transfer Rate 10/100/1000Mbps (Gigabit Ethernet)
WAN Ports 1 x 10/100/1000Mbps (2.5G capable)
LAN Ports 4 (2.5G capable)
USB Port 1 x USB 3.0
With Modem Function No
Support Mesh Yes
Antenna Type Fixed
Application Home
Recommended Uses Home
Operating Temperature 0°C to 40°C
Power Input 12V DC

7. Regulatory Information

This product uses NFC technology and complies with technical requirements for Class C general low-power devices. It is designed for data transmission applications and features an integrated antenna.

  • It is prohibited to change usage scenarios or conditions, expand the frequency range of transmission, increase transmission power, or modify the transmission antenna without authorization.
  • No harmful interference shall be caused to other legitimate radio stations, nor shall protection from harmful interference be claimed.
  • If harmful interference is caused, use should be immediately stopped and measures taken to eliminate the interference.
  • The use of low-power equipment within aircraft and in electromagnetic environmental protection zones (e.g., radio astronomy observatories, meteorological radar stations, satellite earth stations, airports) must comply with relevant regulations.
  • It is prohibited to use any kind of model remote controllers within a radius of 5,000 meters from the center point of an airport runway.

8. Support

For further assistance, you can refer to the comprehensive user manual available in PDF format:

View User Manual (PDF)

You can also visit the official Xiaomi service website at www.mi.com/service or contact the service hotline: 400-100-5678.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.