1. Introduction
Thank you for choosing the XINOWY Y70 Motorcycle Bluetooth Helmet Headset. This device is designed to enhance your riding experience with clear audio, hands-free communication, and vibrant RGB lighting. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your headset.

Figure 1: Y70 Headset Overview. Features Bluetooth 5.3, RGB lighting, standby time up to 130 hours, working hours up to 12 hours, and a 500mAh battery capacity.
2. Package Contents
Please check the box for the following items:
- 1 x Y70 Host Unit
- 1 x Speaker Microphone Set
- 1 x Velcro Installation Package
- 1 x Type-C Charging Cable
- 1 x Instruction Manual (this document)
3. Product Overview
Familiarize yourself with the components and controls of your Y70 headset:

Figure 2: Y70 Headset Component Diagram. Labels include Light mode switch, Charging indicator light (Red), Operating indicator light, Volume down/last song, Volume plus/next song, Charging port, Speaker/wheat interface, and Switch button/Pause button/Answer button.
- Light Mode Switch: Toggles RGB lighting effects.
- Charging Indicator Light (Red): Indicates charging status.
- Operating Indicator Light: Shows device status (on, off, pairing).
- Volume Down / Last Song: Decreases volume or skips to the previous track.
- Volume Plus / Next Song: Increases volume or skips to the next track.
- Charging Port: Type-C port for charging the device.
- Speaker/Wheat Interface: Connects the speaker and microphone unit.
- Switch Button / Pause Button / Answer Button: Multi-functional button for power, playback, and call management.
4. Setup
4.1. Initial Charging
Before first use, fully charge your Y70 headset. The built-in 500mAh battery takes approximately 2 hours to fully charge.
- Connect the Type-C charging cable to the headset's charging port and to a USB power source (e.g., computer, USB wall adapter).
- The Red Charging Indicator Light will illuminate during charging.
- Once fully charged, the indicator light will turn off.
- Note: If the machine is on when the charger is plugged in, the headset will automatically shut down.
4.2. Installation on Helmet
Use the provided Velcro installation package to securely attach the Y70 headset to your helmet. Ensure the speaker and microphone are positioned correctly for optimal audio quality and voice pickup.
- Attach the Velcro pads to the desired location on your helmet and to the back of the Y70 host unit.
- Securely mount the headset.
- Position the speakers inside the helmet, ensuring they are aligned with your ears.
- Position the microphone close to your mouth, ensuring it is not obstructed.
- Important Notice: Before permanently installing the headphones, connect your phone and test the sound and volume. If there is a significant difference in sound effect and volume after installation, adjust the position of the speaker in the helmet for best results.
5. Operating Instructions
5.1. Power On/Off
- Power On: Press and hold the Switch Button for 3 seconds. You will hear a power-on tone, and the LED light will flash quickly.
- Power Off: Press and hold the Switch Button for 3 seconds. You will hear a shutdown tone, and the LED light will turn off.
5.2. Language Switching
- When the headset is powered on and Bluetooth is disconnected, double-click the Switch Button to toggle between Chinese and English voice broadcasts.
5.3. Bluetooth Pairing
The Y70 headset uses Bluetooth 5.3 for a stable and high-quality connection.

Figure 3: Bluetooth 5.3 Technology. Adopting the new generation Bluetooth 5.3 chip for improved performance, more stable connection, low latency, purer sound quality, and a more stable signal.
- Ensure the headset is powered off.
- Press and hold the Switch Button for 3 seconds to power on. The operating indicator light will flash quickly, indicating it's in pairing mode.
- On your mobile phone, enable Bluetooth and search for available devices.
- Select