AUXITO W5W T10 LED Bulb

Contents

AUXITO W5W T10 LED Bulb Instruction Manual

Model: W5W T10 LED Bulb (Batch/Serial Number: AUX-010)

1. Product Overview

The AUXITO W5W T10 LED bulbs are designed to replace original halogen bulbs, offering high-brightness, energy-saving technology, and a shock-resistant, temperature-tolerant design. These bulbs enhance illumination and warning effects, fitting most vehicle models' corresponding light positions for interior lighting.

AUXITO T10 W5W LED Bulbs
AUXITO T10 W5W LED Bulbs, showing the front and side view of two bulbs.

2. Safety Warnings

  • CHOKING HAZARD: Small parts. Not for children under 3 years.
  • Exclusively for DC12V vehicle electrical systems. Never connect to 24V power sources to prevent LED burnout.
  • Handle with bare hands during installation; do not touch LED chips with sharp objects to prevent damage.
  • Avoid touching the lamp body after illumination to prevent burns from high temperatures.
  • Do not disassemble the lamp body; doing so will void the warranty.
  • For turn signal/brake light models, ensure LED power compatibility to prevent flickering or failure.

3. Specifications

Attribute Value
Rated Voltage 12 V DC (9-18V DC operating range)
Interface Type T10 (W5W/194)
Socket Compatibility T10 W5W 194 168 2825 192 158
Lumens 200LM per bulb
Wattage 2W
Color Temperature 6000K White
LED Chipset 14pcs 2835 SMD
Item Weight 20g
Dimensions (approx.) 26mm (Length) x 12mm (Width)
Features Canbus Error Free, 360° Lighting, Low Power Consumption, High Brightness
Super Bright 2835 LED Chipset details
Image detailing the "SUPER BRIGHT 2835 LED CHIPSET" with specifications: 14pcs 2835 SMD, 6000K white, 9-18V DC, low consumption, high brightness.
360 degree lighting diagram
Diagram illustrating 360° lighting with no dark spots from the LED bulb.
Canbus Error Free explanation
Diagram explaining "CANBUS ERROR FREE" feature, ensuring constant current and no error for 95% of vehicles, with a built-in intelligent IC driver.

4. Installation

These LED bulbs are designed for direct plug-in installation, requiring no modification to your vehicle's electrical system.

Installation Steps:

  1. Before installation, turn off the vehicle power and remove the key to prevent short circuits.
  2. Locate the original bulb socket. Pinch the socket and twist to remove the original bulb, or pull it straight out.
  3. Align the new LED bulb with the socket and insert it fully. Gently shake to confirm secure seating.
  4. Turn on power to test illumination.
  5. If the light fails to illuminate, remove the bulb, reverse its orientation (swap polarity), and reinsert. Ensure secure seating before replacing the socket cover.
Easy Installation diagram with dimensions
"EASY INSTALLATION" diagram showing the LED bulb dimensions (26mm length, 12mm width) compared to a halogen bulb, with a note about reversing polarity if the bulb doesn't light up.

5. Precautions

  • Ensure the vehicle's power is off and the key is removed before handling the bulbs to prevent electrical shock or short circuits.
  • Do not force the bulb into the socket. If it doesn't fit, double-check the socket type and bulb compatibility.
  • Always test the bulb after installation before fully reassembling the light fixture.

6. Troubleshooting

Common Issues and Solutions:

  • Bulb does not light up after installation:
    • LED bulbs are polarity sensitive. Remove the bulb, flip it 180 degrees, and reinsert it into the socket.
    • Ensure the bulb is securely seated in the socket.
  • Canbus System Errors (flickering, error warnings):
    • Some vehicles equipped with a Canbus system may experience issues with LED bulbs. While these bulbs are designed to be Canbus error-free for 95% of vehicles, a small percentage may still require an additional Canbus decoder (load resistor) to prevent flickering or error messages.
    • If issues persist, consider installing suitable Canbus decoders. If decoders do not resolve the problem, contact support.
  • Limited Installation Space:
    • Some vehicles may have limited space for bulb installation. Verify the dimensions of the LED bulb against the available space in your vehicle's light housing before purchase and installation.
AUXITO vs Halogen Bulb comparison
Comparison image showing the brightness difference between AUXITO LED bulbs and traditional halogen bulbs in a car interior.

7. Warranty and Support

AUXITO offers a 12-month warranty on its products. If you encounter any issues, please follow the steps below to claim your warranty:

Steps to Get Warranty Service:

  1. Take a clear photo showing the code on the bottom of the lamp.
  2. Send the pictures to the seller via AliExpress message.
  3. Replacements will be arranged after the pictures are reviewed and the issue is confirmed.

Warranty Exclusions: The warranty does not cover damages due to natural disasters (e.g., earthquake, flood) or issues arising from incorrect installation or incompatible Canbus systems where an external decoder was not used when required.

For further assistance, you may refer to the official user manual PDF: View User Manual (PDF)

8. User Tips

  • Double-Check Polarity: If the bulb doesn't light up initially, simply remove it, rotate it 180 degrees, and reinsert. LED bulbs are polarity sensitive.
  • Test Before Final Assembly: Always test the functionality of the LED bulb immediately after inserting it into the socket and before fully reassembling any covers or panels. This saves time if adjustments are needed.
  • Clean Contacts: Ensure the bulb socket's metal contacts are clean and free of corrosion for optimal electrical connection.

9. Frequently Asked Questions (FAQ)

Q: Are these bulbs compatible with all car models?
A: These bulbs are designed to fit T10 (W5W/194) sockets, which are common in many vehicles for interior lighting. However, always verify your vehicle's specific bulb type before purchasing.
Q: Do I need any special tools for installation?
A: No special tools are typically required. Installation usually involves simply removing the old bulb and plugging in the new LED bulb. Some vehicle models might require a plastic trim removal tool to access the light housing.
Q: What if the bulb flickers or causes an error message?
A: While these bulbs are Canbus error-free for most vehicles, some sensitive Canbus systems may still require an additional load resistor (Canbus decoder) to prevent flickering or dashboard error messages. If this occurs, contact support for recommendations.

Manufacturer: SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD

EU Authorized Representative: APEX CE SPECIALISTS LIMITED, Grafenberger Allee 277, 40237 Düsseldorf, DE

Made in China

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.