Logitech G703

Contents

Logitech G703 LIGHTSPEED Wireless Gaming Mouse

User Manual

1. Introduction

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Logitech G703 LIGHTSPEED Wireless Gaming Mouse. Please read this guide thoroughly to ensure optimal performance and longevity of your device.

Logitech G703 LIGHTSPEED Wireless Gaming Mouse

Figure 1: Logitech G703 LIGHTSPEED Wireless Gaming Mouse

2. Setup Instructions

2.1 Connecting the Receiver

1. Locate the wireless receiver, USB adapter, and optional 10g weight in the packaging.

2. Plug one end of the provided cable into your PC.

3. Plug the other end of the cable into the USB adapter, and then plug the wireless receiver into the USB adapter.

Note: The receiver can also be plugged directly into your PC. However, using the cable and adapter in wireless mode is recommended for better connectivity and easier access to the cable for recharging.

2.2 Powering On the Mouse

Turn the mouse on using the On/Off switch located on the bottom of the mouse.

2.3 Charging the Mouse

To charge your G703 mouse:

1. Disconnect the cable from the USB adapter.

2. Plug the cable directly into the front of the mouse.

Your mouse will operate in data-over-cable mode whenever it is plugged directly into a PC. A full charge from an empty battery requires approximately two hours when plugged into a PC USB port.

Setup Diagram: Connecting receiver, turning on mouse, and charging

Figure 2: Setup and Charging Diagram

2.4 Setup Tips

  • Keep the mouse and receiver at least 2 meters (6.5 feet) away from wireless routers or other 2.4GHz wireless devices to minimize environmental noise and interference.
  • The G703 has a wireless range of up to 10 meters (33 feet). For optimal performance in noisy wireless environments and to keep the charging cable easily accessible, it is recommended to keep the receiver within 20 cm (8 inches) of the mouse.

3. Operating Instructions

3.1 Mouse Features

The Logitech G703 mouse is equipped with the following features:

  1. Left Click (Button 1)
  2. Right Click (Button 2)
  3. Wheel Click (Button 3)
  4. Back (Button 4)
  5. Forward (Button 5)
  6. DPI Cycle Button
  7. On/Off Switch (located on the bottom of the mouse, not programmable)
  8. Weight Door (for optional 10g weight)
Mouse Features Diagram: Labeled buttons and switches

Figure 3: G703 Mouse Features

3.2 Wireless Battery Life

The G703 features a rechargeable 720mAh LiPol battery, providing:

  • Up to 32 hours of non-stop gaming at a 1ms report rate with lights off.
  • Up to 24 hours of non-stop gaming at a 1ms report rate with RGB color cycling on.

Checking Charge Level:

  • The charge level can be checked when the mouse is powered on, or by assigning a button in Logitech Gaming Software (LGS) to check the charge level.
  • Upon power-on, the scroll wheel will display the charge level for seven seconds using different colors:
    • Green: 50-100%
    • Orange: 30-50%
    • Red: 15-30%
    • Flashing Red: Less than 15%
  • The scroll wheel will flash red when the battery is at 15% or less, indicating it's time to plug in the mouse for charging.
  • Detailed charge level, power draw, and estimated remaining battery life can be monitored within Logitech Gaming Software.
Battery Life Indicator Diagram: Scroll wheel color codes

Figure 4: Battery Level Indicators

3.3 Charging and Data Over Cable

When the battery is low, plug your mouse in using the provided USB charging cable. The mouse will seamlessly switch to data-over-cable mode. The G703 is also compatible with the Logitech G POWERPLAY wireless charging system (sold separately).

3.4 RGB Programmable Lighting

The G703's scroll wheel and logo are illuminated with RGB LEDs. These colors can be customized using Logitech Gaming Software to various effects such as breathing, color cycling, or solid color modes. Lighting patterns can also be synchronized with other supported Logitech G devices.

3.5 Logitech Gaming Software (LGS)

LGS allows you to customize up to 3 onboard profiles for your G703. Settings include:

  • Surface tuning
  • Button programming (macros are programmable)
  • Lighting color and effects
  • Report rate
  • Tracking behavior

The G703 supports up to 5 DPI settings per profile. By default, one active onboard profile is set with:

  • DPI: 400, 800, 1600, 3200
  • RGB Lighting: Color cycle
  • Report Rate: 1ms

4. Maintenance

4.1 Cleaning

To clean your mouse, use a soft, slightly damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the surface and internal components.

4.2 Weight Management

The G703 includes an optional 10g weight. To insert or remove the weight, open the weight door located on the bottom of the mouse and place or remove the weight as desired. Ensure the door is securely closed afterward.

5. Troubleshooting

5.1 Connectivity Issues

  • Ensure the USB receiver is securely plugged into a USB port on your PC.
  • Verify the mouse is powered on.
  • Move the receiver closer to the mouse (within 20 cm/8 inches is ideal).
  • Ensure there are no strong 2.4GHz wireless devices (like Wi-Fi routers) too close to the mouse or receiver (maintain at least 2 meters/6.5 feet distance).
  • Try plugging the receiver into a different USB port on your computer.

5.2 Charging Problems

  • Ensure the charging cable is securely connected to both the mouse and a working USB port on your PC.
  • Try using a different USB port or a different USB cable if available.
  • Allow the mouse to charge for at least 15-30 minutes before attempting to use it if the battery was completely depleted.

5.3 Software Issues

  • Ensure you have the latest version of Logitech Gaming Software installed.
  • Try reinstalling Logitech Gaming Software.
  • Check Logitech's support website for known issues or updates.

5.4 Mouse Unresponsive

  • Restart your computer.
  • Turn the mouse off and on again.
  • Reconnect the USB receiver.
  • If using in wireless mode, try connecting the mouse directly via the USB cable to see if it functions in wired mode.

6. Specifications

FeatureSpecification
BrandLogitech
ModelG703
ConnectivityLIGHTSPEED 2.4 GHz Wireless, USB Wired
Interface TypeUSB
Sensor TechnologyOptoelectronic (DELTA ZERO™)
Max DPI12000 DPI
Number of Buttons6 (Programmable)
Number of Scroll Wheels1
Hand OrientationRight-handed
Power TypeRechargeable LiPol Battery
Battery Capacity720mAh
Battery Life (approx.)Up to 32 hours (lights off), 24 hours (RGB cycling)
Charging Time (approx.)2 hours (from empty to full)
Wireless RangeUp to 10 meters (33 feet)
Dimensions (H x W x D)124 mm x 68 mm x 43 mm
WeightMouse only (excluding optional weight)
Optional Weight10g
Product Size Diagram: G703 dimensions

Figure 5: G703 Product Dimensions

7. User Tips

  • Macro Programming: The G703 supports macro programming through the Logitech Gaming Software. Utilize this feature to customize your gaming experience.
  • Optimize Battery Life: To extend battery life, consider turning off RGB lighting when not essential, or set it to a less power-intensive mode.
  • Software Updates: Regularly update your Logitech Gaming Software to ensure you have the latest features, bug fixes, and performance enhancements for your mouse.
  • Receiver Placement: For the most stable wireless connection, always try to keep the USB receiver within close proximity to the mouse and clear of obstructions.

8. Warranty and Support

Your Logitech G703 LIGHTSPEED Wireless Gaming Mouse is covered by Logitech's manufacturer warranty. Please refer to the warranty information provided with your product packaging or visit the official Logitech website for details on warranty terms and conditions.

For further assistance, frequently asked questions, and troubleshooting guides, please visit the official Logitech support page:

http://support.logitech.com/product/g703

A comprehensive user manual in PDF format may also be available for download from the Logitech support website.

© 2023 Logitech. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.