COOSPO H6/H9Z

Contents

COOSPO H6/H9Z Chest Heart Rate Monitor User Manual

Model: H6/H9Z

Brand: COOSPO

1. Introduction

The COOSPO H6 and H9Z Heart Rate Monitors are designed to capture real-time heart rate data using Bluetooth and ANT+ technologies. These devices can be paired with a wide range of training applications, GPS watches, and bike computers, providing essential data for your fitness activities. This user manual provides detailed instructions to help you set up, operate, and maintain your heart rate monitor for optimal performance.

Note: This product is intended for sports purposes only and is not designed to replace any medical device.

COOSPO H6 Heart Rate Monitor

Image: COOSPO H6 Heart Rate Monitor, front view.

2. Standard Accessories

The package typically includes the following items:

  • Heart Rate Monitor (H6 or H9Z) x 1
  • Chest Strap x 1
  • User Manual x 1

Note: The H6 model comes with a CR2032 battery installed. The H9Z model uses magnetic USB charging and includes a charging cable.

Standard Accessories for COOSPO H6 Heart Rate Monitor

Image: Diagram showing the Heart Rate Monitor, Chest Strap, and User Manual.

3. Setup

3.1. Wearing the Heart Rate Monitor

  1. Moisten the Electrode Areas: Lightly moisten the electrode areas on the back of the chest strap with water. This ensures good contact with your skin for accurate heart rate detection.
  2. Diagram showing how to moisten the electrode areas on the chest strap

    Image: Diagram illustrating moistening the electrode areas.

  3. Attach the Connector: Snap the heart rate monitor connector onto the chest strap. Ensure the side marked 'L' on the connector faces left.
  4. Diagram showing how to attach the heart rate monitor connector to the chest strap

    Image: Diagram illustrating attaching the connector to the chest strap.

  5. Adjust the Strap: Place the chest strap around your chest, just below your pectoral muscles. Adjust the strap length to ensure a snug but comfortable fit. Verify that the moist electrode areas are firmly against your skin and the COOSPO logo on the connector is in a central and upright position.
  6. Diagram showing the correct wearing position of the chest heart rate monitor

    Image: Diagram showing the correct wearing position of the heart rate monitor.

3.2. Connecting to a Third-Party App (Bluetooth)

Your COOSPO heart rate monitor is compatible with numerous fitness applications.

  1. Enable Bluetooth: On your smartphone, go to Settings and toggle Bluetooth to the ON position.
  2. Open the App: Launch your preferred fitness app (e.g., CoospoRide, Wahoo Fitness, Zwift).
  3. Pair the Device: Within the app's settings or device connection menu, search for and select your COOSPO heart rate monitor (e.g., H6 or H9Z) to pair.

Important: Do not attempt to search for or pair the device directly from your phone's Bluetooth settings page. Simply turn on Bluetooth and proceed to connect within the specific fitness application.

Third-party APP Compatible diagram showing compatibility with various apps

Image: Diagram illustrating compatibility with various third-party applications.

Bluetooth 4.0 & ANT+ connectivity diagram

Image: Diagram showing Bluetooth and ANT+ connectivity to various devices.

3.3. Connecting to an ANT+ Watch or Bike Computer

  1. Wear the Monitor: Ensure the heart rate monitor is worn correctly as described in section 3.1.
  2. Add Device: On your ANT+ compatible watch or bike computer, navigate to the device settings and find the option to add a new sensor. Search for and select your COOSPO heart rate monitor (H6 or H9Z) from the ANT+ device list.
  3. Start Training: Begin your training session as prompted by your device. Your heart rate data will be displayed in real-time.

4. Operation

The COOSPO H6/H9Z heart rate monitor is designed for ease of use. Once properly worn and connected to a compatible device or app, it will automatically begin tracking your heart rate. The device activates when it detects a heart rate signal and deactivates when removed from the chest strap or when no heart rate is detected for a period.

Ensure the electrodes are moistened before each use to guarantee immediate and accurate activation.

5. Maintenance

The H6/H9Z is a high-tech instrument that requires careful handling to ensure reliable measurement and maximize its lifespan. Follow these caring instructions:

5.1. Heart Rate Connector

  • Detach the connector from the strap after each use.
  • Dry the connector with a soft towel.
  • Do not use cleaning chemicals on the connector.

5.2. Chest Strap

  • Clean the strap under running water after each use.
  • Hang the strap to dry.
  • Do not clean the strap in a washing machine or dryer.
  • Never use cleaning chemicals on the strap, as they can cause rapid aging and shorten its service life.
  • Do not stretch the strap or bend the electrode areas sharply.
  • Do not store the heart rate monitor wet in non-respirable materials to prevent rapid oxidation. Always dry and store the strap and the connector separately.

6. Battery Information

6.1. H6 Battery Replacement (CR2032)

  1. Open the Battery Cover: Use a coin to twist the battery cover counter-clockwise until it clicks out of place.
  2. Diagram showing how to open the battery cover with a coin

    Image: Diagram illustrating opening the battery cover.

  3. Remove Old Battery: Carefully remove the old CR2032 battery. Properly dispose of used batteries in accordance with local environmental regulations.
  4. Insert New Battery: Replace with a new CR2032 battery, ensuring the positive (+) side is facing up.
  5. Close the Cover: Use a coin to twist the battery cover back into place, turning clockwise until it is securely closed.
  6. Diagram showing battery disposal and replacement with positive side up

    Image: Diagram illustrating battery disposal and replacement.

Warning: To avoid danger, batteries should be kept away from children.

6.2. H9Z Charging (Magnetic USB)

The H9Z model features a built-in rechargeable lithium battery (70 mAh) and charges via a magnetic USB cable. Connect the magnetic charging cable to the designated charging points on the device and plug the USB end into a power source.

6.3. Battery Safety Statement

⚠ WARNING:

  • INGESTION HAZARD: This product contains a button cell or coin battery (H6 model). DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
  • KEEP new and used batteries OUT OF REACH of CHILDREN.
  • Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
  • Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
  • Even used batteries may cause severe injury or death. Call a local poison control center for treatment information.
  • Do not force discharge, recharge (for H6), disassemble, heat above 45°C, or incinerate. Doing so may result in injury due to venting, leakage, or explosion resulting in chemical burns.
  • Ensure the batteries are installed correctly according to polarity (+ and -) for H6.
  • Do not mix old and new batteries, different brands, or types of batteries (e.g., alkaline, carbon-zinc, or rechargeable) for H6.
  • Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
  • Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

7. Specifications

Product pictures and Specification table comparing H6 and H9Z models

Image: Specification table comparing H6 and H9Z models.

Specification H6 Model H9Z Model
Heart Rate Monitor Type Chest Chest
Material ABS ABS
Dimensions 60 x 33.8 x 12.2 mm 58.42 x 25.4 x 10.16 mm
Weight (Sensor+Strap) 46.4g 43g
Waterproof Level IP67 IP67
Wireless Connections Bluetooth & ANT+ Bluetooth 5.0 & ANT+
Wireless Signal Strength ANT+: 7 m, Bluetooth: 10 m ANT+: 7 m, Bluetooth: 10 m
Mobile Phone Compatibility iPhone & Android iPhone & Android
Third-party App Compatibility Yes Yes
Heart Rate Tracking Yes Yes
HRV Available Available
Charging Method Replacement battery (CR2032) Magnetic USB Charging
Battery CR2032 Lithium battery, 70 mAh
Memory No No
Heart Rate Range 30 - 240 bpm 30 - 240 bpm
Strap Adjustable Length (L) 65 - 95 cm (L) 65 - 95 cm

Applicable Smart Phones:

  • iOS 7.0 or above, iPhone 4s model or above
  • Android 4.3 or above with Bluetooth 4.0

Compatible Apps:

CoospoRide, Wahoo Fitness, Endomondo, Polar Beat, Adidas Running, UA Run, Zwift, Nike+ Run Club, Heartool, or other Apps with heart rate display feature.

Note: When using Nike+ Run Club, please refer to the steps of displaying heart rate data in the App running settings.

IP67 Waterproof rating with a man wearing the sensor and icons for various activities

Image: IP67 Waterproof rating, suitable for cycling, fitness, football, running, badminton, basketball. Not suitable for swimming.

Comfortable and Convenient to Wear, showing the sensor on a runner and dimensions

Image: Comfortable and convenient to wear, with elastic adjustment of tightness. Weight 48g, Thickness 10mm, Adjustable 65-95cm.

8. Troubleshooting

  • Device Not Turning On/Connecting: Ensure the electrode areas on the chest strap are adequately moistened before wearing. The device activates automatically upon detecting a heart rate signal.
  • Inconsistent Readings: Check that the chest strap is worn snugly and correctly positioned below the pectoral muscles. Ensure the electrodes are moist.
  • App/Device Compatibility: Verify that your smartphone, GPS watch, or bike computer supports Bluetooth 4.0 (or 5.0 for H9Z) or ANT+ connectivity. Some apps may require specific settings to display heart rate data from external sensors.
  • Connection Issues with CoospoRide App: If experiencing difficulty linking with the CoospoRide app, try updating the app to the latest version or attempting connection with another compatible fitness app to isolate the issue.
  • Battery Issues (H6): If the H6 is not powering on, check the CR2032 battery. Ensure it is inserted with the correct polarity (+) side up and that the battery compartment is securely closed. Replace the battery if necessary.
  • Charging Issues (H9Z): Ensure the magnetic charging cable is properly connected to the H9Z device and the USB power source.

9. User Tips

  • The heart rate monitor features automatic activation when worn and deactivation when removed, offering convenient usage.
  • Moistening the electrodes thoroughly before each use helps ensure immediate and accurate heart rate detection.
  • The chest strap is adjustable for a comfortable fit (65-95 cm length).
  • The H6 model offers long battery life with its replaceable CR2032 battery, and replacement straps can be purchased separately.
  • Users have reported successful compatibility and accurate readings with devices such as Garmin Edge 1030 Plus, Garmin 540, Garmin 530, Suunto Race 2, and fitness platforms like MyWhoosh.
  • This heart rate monitor provides excellent value for money, especially for hobbyist use.

10. Disclaimer

  • The product described in this user manual is subject to change without prior notice due to the manufacturer's ongoing development program.
  • Our company shall not be liable for any damages, losses, costs, or expenses, whether direct, indirect, incidental, consequential, or special, arising out of or related to the use of this material or the products described herein.

11. FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Waste Electrical Products: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

⚠ Product Safety Warnings:

  • Do not open or modify the product.
  • Do not disassemble or attempt to service this product.
  • This product is safe under normal and reasonably foreseeable operating conditions.
  • If the product is operating improperly, call COOSPO support.
  • Product must be returned to the manufacturer for any service or repair.

12. Warranty & Support

For further assistance, technical support, or warranty inquiries, please contact COOSPO customer service through their official channels.

You can also refer to the official user manual PDF for additional details: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.