JoyMaySun Diving Mask Snorkel Set

Contents

Diving Mask Snorkel Set User Manual

Model: Diving Mask Snorkel Set

Brand: JoyMaySun

1. Introduction and General Safety

Please read these instructions carefully before use and keep them in a safe place for future reference. This product is designed for snorkeling only. Please use it with caution and safety. Misuse of this product is at the user's own risk.

This product complies with the essential health and safety requirements set out in Regulation (EU) 2016/425 and meets the EN 16805:2015 standard.

Snorkeling Safety Guidelines:

  • This product should only be used by individuals who are capable of snorkeling and swimming.
  • Under no circumstances should anyone snorkel or swim alone.
  • Always inspect this product before each use. Do not use it if you notice any fault or malfunction.
  • Never jump or plunge with your face towards the water. Such impact may damage the product and result in personal injury.
  • This equipment can break or shatter if subjected to undue force or impact.

Important Warnings:

  • Modification of the product is forbidden. Any alteration to a part may lead to an accident.
  • Keep the mask away from heat sources and avoid prolonged exposure to direct sunlight.
  • This product should not be used by individuals who are pregnant or suffer from heart disease, asthma, high blood pressure, or otitis media.
  • If you experience any dizziness, light-headedness, or shortness of breath while using this product, please stop using it immediately.

2. Setup and Assembly

Components:

Your Snorkel Set includes a diving mask and a snorkel tube.

Assembly Instructions:

Follow these steps to assemble your snorkel set:

  1. Take out the buckle from the clip: Locate the quick-release strap clip on the snorkel tube and detach the buckle.

    Diagram showing four steps to assemble the snorkel set. Step 1: Hand taking out the buckle from the snorkel clip.

    Assembly steps for the snorkel set.

  2. Connect the buckle with the snorkel mask strap: Thread the mask strap through the buckle.

  3. Put back the buckle: Reattach the buckle to the snorkel clip, ensuring it is securely fastened.

  4. Try the snorkel set and adjust clip position: Wear the mask and snorkel, then adjust the clip position on the snorkel tube so the mouthpiece is comfortable and correctly aligned with your mouth.

Mask Fitting:

Proper fitting is crucial for comfort and to prevent water leakage.

  • Remove Protective Film: When you first receive your mask, there may be a plastic film on the inside lens for protection during transit. Please remove this film before use.
  • Clear Hair: Ensure all your hair is clear from around your face where the mask will seal. Even one strand of hair can break the seal.
  • Shaving Hint for Men: For the best seal, it is recommended to shave before trying on your mask.
  • Attach Snorkel: Attach the snorkel to the side of the mask using the clip on the snorkel. Adjust the snorkel clip so the snorkel mouthpiece faces towards your face and is level with your mouth. Hold the mask in front of your face while attaching the snorkel to ensure it's adjusted correctly.
  • Adjust Strap: The strap of the mask should be elevated slightly across the back of your head. Push the mask against your face while breathing in to ensure a snug fit.
  • Mouthpiece Placement: Put the mouthpiece inside your mouth with the snorkel tube against your ear. Bite down gently on the bite tabs and make sure you don't have any discomfort against your gums. Use your lips to seal the front of your mouthpiece to avoid water from leaking in.

3. Operating Instructions

Breathing with the Snorkel:

Take slow, regular breaths in and out through the snorkel tube. Breathe slowly, deeply, and cautiously with your mouth through your snorkel. There is no need to panic; just relax and become aware of your breathing. The sound of your breathing through the snorkel barrel should become quite noticeable. Once you get into a rhythm, relax and enjoy the underwater experience.

Clearing the Snorkel Tube of Water:

It's normal for the dry snorkel to get water in it, especially when waves are large. Water that leaks inside the snorkel tube will collect at the bottom, where there is a small purge valve. With a light exhale, there is enough force for the water to just drain down through the valve, rather than having to blow it back up through the tube with a huge gust of air.

Dry Top Snorkel System:

The snorkel features an upgraded float valve design for a full dry experience. The mechanism works as follows:

  • Above Water: The float ball inside the snorkel goes down due to gravity, allowing the air valve to open and air to enter the breathing tube freely.
  • Under Water: When the tube head is submerged, the float ball goes up due to buoyancy, immediately closing the air valve. This seals the breathing tube and prevents water from entering.
Diagram illustrating the Dry Top Snorkel System. One snorkel is shown above water with the float ball down, and another is underwater with the float ball up, sealing the tube.

Illustration of the Dry Top Snorkel System mechanism.

Video demonstrating the snorkel set in use underwater.

4. Maintenance

Proper maintenance will extend the life of your snorkeling gear.

  • After Each Use: Wash the mask and snorkel thoroughly with fresh water.
  • After Sea Snorkeling: Put the mask in warm fresh water for a few minutes to avoid corrosion from saltwater.
  • Cleaning Agents: Avoid using soap or detergents, especially those containing alcohol, hydrocarbons, or chlorine, as these may cause damage to the product components and affect visibility.
  • Drying: Keep the set dry after use. Let it air dry in the shade.
  • Storage: Store this product in a cool, dry place, away from direct sunlight.
  • Lens Care: Do not use a towel to clean the face lens; a glasses cloth is better to prevent scratches. Do not place the face lens directly on hard surfaces.
  • Anti-fogging: If the mask fogs up easily, wipe the inside with an anti-fog solution, then rinse thoroughly with clean water.

5. Troubleshooting and FAQ

Common Questions and Solutions:

Q: Will the mask work if I have a beard?
A: In general, the mask will perform best when you are clean-shaven. If you have some light facial hair, you may experience minor leaking, but the mask should still be usable.
Q: Is there any age limit for users of this product?
A: This product is not suitable for babies or children less than 36 months old, as it may lead to choking hazards.
Q: Does this diving mask have requirements for the water temperature of the environment in which it is used?
A: We suggest that users wear the mask in water temperatures between 18°C and 45°C for optimal performance and comfort.
Q: Can I breathe through both my nose and mouth with this snorkel mask?
A: This snorkel mask is designed for mouth breathing through the snorkel tube. While the mask covers your nose, the snorkel system is primarily for mouth breathing.

6. Specifications

FeatureDetail
Product TypeSnorkeling Equipment
MaterialsSilicone, PC (Polycarbonate), PVC
Snorkel Length46.4 cm (18.24 inches)
Mask Size17.2 cm x 9.2 cm (6.76 inches x 3.62 inches)
Net Weight400.0 g (14.11 oz)
Package Dimensions (L x W x H)32 cm x 15 cm x 7 cm
Package Weight0.426 kg
Vision180-degree panoramic view, Tempered Glass lens, Anti-fog, Anti-impact
Snorkel FeaturesDry Top Valve System, Large Diameter Purge Valve, Flexible Tube, Food Grade Mouthpiece
Mask FeaturesComfort Fit Silicone Skirt, Speed Fit Buckles, Adjustable Silicone Strap

Detailed Product View:

Detailed view of the diving mask and snorkel, with labels for High Quality Skirt, Comfortable Silicone Strap, Speed Fit Buckles, One Piece Tempered Glass, Optimum Rigidity and Support, Food Grade Mouthpiece, Flexible Tube, Quick-Release Strap Clip, Purge Valve, Dry Top Valve.

Labeled diagram of the mask and snorkel components.

Detailed view of the snorkel tube highlighting features like Dry Top Valve, Fixed Buckle, Corrugate Silicone Tube, Drain Valve, and Silicone Mouthpiece.

Detailed view of snorkel tube features.

Image highlighting the 180-degree superior view, 180-degree HD vision, anti-fog, anti-leak, and tempered glass features of the mask.

Key features of the diving mask.

7. User Tips

  • For the best mask seal and to prevent minor leaks, ensure your face is clean-shaven before use.
  • Always check the water temperature. This snorkel set is best used in water between 18°C and 45°C.
  • Practice breathing with the snorkel in shallow water to get accustomed to the sensation before venturing into deeper areas.
  • Remember to exhale gently into the snorkel to clear any accumulated water through the purge valve.
  • Rinse your gear thoroughly with fresh water after every use, especially after saltwater exposure, to prevent corrosion and prolong its lifespan.

8. Warranty and Support

For any questions, concerns, or support regarding your JoyMaySun Diving Mask Snorkel Set, please refer to the official user manual PDF for detailed warranty information or contact the manufacturer's customer service.

You can view the user manual (PDF) here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.