Hyundai Sonata 8 2010-2014

Contents

User Manual: Side Mirror Turn Signal Light

For Hyundai Sonata 8 (2010-2014)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your new LED Side Mirror Turn Signal Lights. These lights are designed as direct replacements for the original rearview mirror turn signal indicators on Hyundai Sonata 8 models manufactured between 2010 and 2014. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Hyundai Sonata 8 with side mirror turn signal light highlighted, showing the product and its amber illumination.
Overview of the LED Side Mirror Turn Signal Light and its placement on a Hyundai Sonata 8.

2. Safety & Warnings

Failure to follow these safety instructions may result in electric shock, fire, or product damage.

  • Before installing, disassembling, or repairing this product, ensure the vehicle power is completely cut off, the engine is off, and all light switches are turned off. Live operation is strictly prohibited to prevent electric shock and short circuits.
  • Do not modify the product circuit, power, lighting color, or sealing structure without authorization. Unauthorized modifications will void the warranty and may cause safety hazards such as short circuits and fires.
  • During operation, the taillights may generate slight heat. This is normal. Avoid touching high-temperature parts of the lamp body with bare hands to prevent burns. Keep flammable, explosive, or melting objects away from the lamp body.
  • Keep children away from this product, installation tools, and wiring to prevent accidental ingestion of small parts, electric shock, or scratches from tools.
  • If you observe abnormal conditions such as water ingress, fogging, flashing lights, non-illumination, circuit overheating, or unusual odors from the taillights, immediately turn off the vehicle power, cease using the product, and contact customer support or a qualified technician for maintenance. Continued use under such conditions is strictly prohibited.
  • During the installation process, avoid forcefully squeezing or colliding with the lamp body to prevent the lampshade from breaking or the LED beads from being damaged, which could affect the normal operation of the product.

3. Installation Guide

Ensure all protective films are removed from the device before installation.

Step 1: Determine the Installation Position

The turn signal lights are designed to align with the preset installation positions on the side mirrors of your Hyundai Sonata 8. Ensure that after installation, key components such as the license plate, reversing radar, and reflective strips are not blocked. The light irradiation direction should be unobstructed, clearly visible to other vehicles, and the lights should fit the body lines for aesthetic integration.

Image showing two turn signal lights and a Hyundai Sonata 8 with the side mirror turn signal area highlighted.
The product and its intended installation location on the vehicle.

Step 2: Replace the Original Turn Signal Light

For special vehicle type tail lights like this product, no additional mounting bracket is required. You will directly remove the original vehicle turn signal light. Gently pry when removing to avoid damaging the body buckle. Replace the original turn signal light with this product, aligning it with the existing installation hole. Embed the new turn signal light into the mirror housing, adjusting its angle to ensure it is closely attached to the vehicle body, firmly installed, with no looseness, and a flat, beautiful appearance.

Bottom view of the turn signal light showing its mounting points.
Underside view of the turn signal light, showing attachment points.

Step 3: Connect the Wiring Harness

  1. Locate the light control circuit at the rear of the vehicle's side mirror. Use a multimeter to accurately identify each function line: position light positive pole, brake light positive pole, turn signal light positive pole, reverse light positive pole, and the common negative pole (typically a black wire).
  2. Connect the new turn signal light's wiring harness correspondingly. Connect each function wire of the new light to the corresponding vehicle line. The red wire typically connects to the positive pole, and the black wire to the negative pole. Ensure connections are firm and tightly wrapped with insulating tape to prevent exposed wires, poor contact, and short circuits.
  3. Properly arrange and fix the connected wiring harness inside the vehicle body. Avoid the wiring harness being squeezed or worn, and ensure it does not interfere with the normal operation of other vehicle components.

4. Operation: Test and Debug

After installation, turn on the vehicle power supply and test each function of the turn signal light in sequence:

  • Position Light: Turn on the position light and confirm that it illuminates normally.
  • Brake Light: Step on the brake pedal and confirm that the brake light illuminates brightly.
  • Turn Signal Lights: Turn on the left and right turn signal lights and confirm that they flash normally.
  • Reverse Light: Shift into reverse gear and confirm that the reverse light illuminates normally.

During these tests, verify that the light brightness is uniform, there is no flicker, no extinction, and no abnormal heating of the line. Confirm that the turn signal light is firmly installed, with no looseness or abnormal noise. Once all checks are complete, the installation is successful.

Close-up of the installed turn signal light on a car's side mirror, showing clear illumination.
The turn signal light installed and functioning on a side mirror.

5. Maintenance & Care

  • Cleaning: Turn off the vehicle's power before cleaning the lights. Use a soft, lint-free cloth to gently wipe the surface. Avoid abrasive cleaners or solvents.
  • Storage: If the vehicle is stored for an extended period, ensure the lights are kept in a dry place at room temperature (15°C-35°C).

6. Troubleshooting

If you encounter any of the following issues, please refer to the safety warnings and take appropriate action:

Problem Possible Cause / Action
Water ingress or fogging inside the light Indicates a potential seal issue. Immediately cease use and contact support.
Lights flashing abnormally or not illuminating Check wiring connections for looseness or poor contact. If problem persists, cease use and contact support.
Overheating of the circuit or unusual odors Indicates a serious electrical issue. Immediately turn off vehicle power, cease use, and contact support. Do not attempt to fix yourself.
Physical damage (cracks, broken parts) Caused by forceful impact during installation or use. Replace the damaged unit.

7. Product Specifications

Feature Detail
Item Type Side Mirror Signal Blinker
Material ABS
Light Color Yellow
Compatibility Hyundai Sonata 8 Hybrid 2011 - 2014 (also fits 2010 models)
Origin Mainland China
Package Dimensions (approx.) Length: 32 cm, Width: 9 cm, Height: 5 cm
Package Weight (approx.) 0.085 kg

8. User Tips

  • Professional Installation: While DIY installation is possible, consider professional installation for optimal results and to avoid potential damage to vehicle components. Many users report great results when professionally installed.
  • Verify Compatibility: Double-check that this product is compatible with your specific Hyundai Sonata 8 model year (2010-2014) before attempting installation.
  • Blinking Pattern: After installation, observe the turn signal's blinking pattern. If you have questions about whether it should flash all dots together or sequentially, refer to your vehicle's original specifications or consult with a professional. The product is designed to flash normally.
  • Quality Fit: Users have noted that the product is often identical to the original part, ensuring a good fit and appearance.

9. Warranty & Support

For detailed warranty information and customer support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download at User manual (PDF). This document contains additional information regarding product features and legal compliance.

Manufacturer: Guangzhou QIDEWIN Electronic Technology Co., Ltd

Address: China Guangdong Province Guangzhou Baiyun District Yongping Subdistrict Guan Ting Xi Jie No:32

10. Disposal & Recycling

This symbol indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.

© 2024. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.