1. Introduction
Thank you for choosing QIDEWIN H4 LED Projector Headlight Bulbs. This product is designed to provide superior illumination for your vehicle, featuring advanced LED technology for enhanced brightness and a precise beam pattern. This manual provides essential information for safe installation, operation, and maintenance of your new headlights.

Figure 1: QIDEWIN H4 LED Projector Headlight Bulb (6500K, 20000LM, +200% Brightness)
2. Safety & Warnings
- Professional Installation Recommended: Only professional personnel are allowed to install and debug. It is strictly prohibited to modify internal circuits or light sources without authorization.
- Seal Integrity: For outdoor use, confirm that the seal is intact to avoid damage from water accumulation.
- Environmental Precautions: Keep away from sources of fire and corrosive environments.
- Correct Connection: Connect the plug directly to the corresponding model of your vehicle.
- Child Safety: Keep the device and its cord out of reach of children under 3 years old.
- California Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Package Contents
Please check the package for the following items:
- QIDEWIN H4 LED Projector Headlight Bulb(s)
- External LED Driver(s)

Figure 2: Individual H4 LED Projector Headlight Bulb

Figure 3: External LED Driver with intelligent decoding for strong compatibility and anti-radio interference.
4. Installation Guide
These LED headlight bulbs are designed for direct replacement of original car bulbs. Follow these steps for installation:
- Prepare Vehicle: Disconnect the vehicle's power (e.g., battery) to ensure safety.
- Remove Old Bulb: Carefully remove the original headlight bulb from its socket.
- Insert New Bulb: Insert the QIDEWIN H4 LED Projector Headlight into the lamp socket.
- Secure Bulb: Fix the LED headlight by rotating it clockwise until it is securely seated.
- Connect Wiring: Connect the power plug firmly and ensure there is no looseness.
- Power On Test: Reconnect vehicle power. Turn on the headlights to test functionality.
- Adjust Beam Pattern: Adjust the light pattern to the appropriate angle for optimal visibility and to avoid dazzling oncoming drivers.
Caution: Avoid touching the LED chip with your bare hands during installation to prevent fingerprints from affecting brightness and lifespan.

Figure 4: Direct replacement of original car bulb.

Figure 5: Mini size design (36mm sink depth) suitable for most car models.
5. Operating Instructions
Your QIDEWIN H4 LED Projector Headlight Bulbs feature both low beam and high beam functions, providing versatile illumination for various driving conditions.
- Low Beam: Provides a focused, cut-off beam pattern suitable for regular driving, preventing glare for oncoming traffic.
- High Beam: Offers a broader and more intense light output for maximum visibility on dark roads.
Video 1: Product demonstration showing low beam, high beam, and waterproof test.

Figure 6: Perfect low beam STG (Standard Terminal Geometry) pattern for safe driving.

Figure 7: Light performance showing distinct low and high beam patterns with clear cut-off.
6. Maintenance
To ensure optimal performance and longevity of your LED headlights, follow these simple maintenance guidelines:
- Cleaning: Turn off the device before cleaning. Use a soft, lint-free cloth to gently wipe the lens and body. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the wiring and connections for any signs of wear or damage. Ensure the seals are intact, especially for outdoor use.

Figure 8: Whole aviation aluminum lamp body and efficient cooling fan for 50,000+ hours lifespan.

Figure 9: Turbo fan cooling ensures lamp temperature is stable at 35°C.

Figure 10: High-speed mute fan (12000R/Min) with high airflow for rapid heat dissipation.
7. Troubleshooting
If you encounter issues with your QIDEWIN H4 LED Projector Headlight Bulbs, try the following:
- Headlight Not Lighting Up:
- Check all connections to ensure they are secure and properly seated.
- Verify that the vehicle's power supply to the headlights is functioning correctly.
- Inspect the external LED driver for any visible damage.
- Flickering or Intermittent Light:
- Ensure all connections are tight.
- Check for any loose wiring.
- Some vehicles may require additional CANBUS decoders to prevent flickering; consult a professional if issues persist.
- Improper Beam Pattern:
- Re-check the bulb's seating in the headlight housing; it must be correctly oriented.
- Adjust the headlight assembly as needed to achieve the desired beam pattern.
If problems persist after troubleshooting, please contact professional automotive service.
8. Specifications
| Feature | Details |
|---|---|
| Product Name | Car light / Car accessories |
| Model | H4 LED Projector (also compatible with H7, H11, H8, H9, 9005, 9006, 9012, 5202, H16, 881, 880, H13, H3 variants) |
| Batch Number | 32778319 |
| Wattage | 120W/Pair |
| Color Temperature | 6500K (Cool White) |
| Luminous Flux | 20000LM/Pair |
| Voltage | 12V |
| LED Chip Type | 3570 Big Chip X2 |
| Lifespan | 50,000+ Hours |
| Waterproof Rating | IP67 |
| Cooling System | Whole Aviation Aluminum Body, Turbo Fan (12000R/Min) |
| Certifications | CE |
| Dimensions (approx.) | Bulb Height: 75mm (2.95in), Total Height: 110mm (4.33in), Sink Depth: 36mm (1.41in), Base Width: 46mm (1.81in) |

Figure 11: Product dimensions.

Figure 12: Close-up of the 3570 Big Chip X2 LED.
9. User Tips
- For optimal beam focus, ensure the bulb is perfectly aligned and seated in the headlight housing.
- After installation, perform a quick test drive to confirm the beam pattern is correctly adjusted and does not blind oncoming drivers.
10. Compliance Information
This product complies with relevant safety and environmental standards.
- CE Mark: This product bears the CE mark, indicating conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
11. Disposal & Recycling
This symbol indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.
12. Warranty & Support
QIDEWIN provides a 1-year warranty for this product from the date of purchase. This warranty covers manufacturing defects under normal use. For support or warranty claims, please contact your retailer or QIDEWIN customer service with your purchase details.