Laiwen AS-T1S-BK

Contents

Laiwen CIC Digital In-The-Ear Hearing Aid User Manual

Model: AS-T1S-BK | Brand: Laiwen

1. Introduction

Thank you for choosing our Laiwen In-The-Ear Hearing Aid. This manual provides essential information on how to use, maintain, and troubleshoot your device. Please read it carefully to ensure optimal performance and longevity of your hearing aid.

1.1. Product Features

  • Digital Chip Design: Advanced processing for clear sound.
  • Light & Good Fit: Designed to match the ear canal for comfort and near invisibility.
  • Stable Amplification: Consistent sound enhancement.
  • Long Battery Life: Battery lasts up to 40 hours.
  • Intelligent Noise Reduction System: Improves listening comfort in noisy environments.
  • Suitable for mild to profound hearing loss.
Diagram illustrating key features: Digital Chip Design, Light & Good Fit, Stable Amplification, and 40-hour Battery Life.
Figure 1: Key Features of the Hearing Aid
Graph showing the intelligent noise reduction system's performance and fitting range for hearing loss.
Figure 2: Intelligent Noise Reduction System and Fitting Range

1.2. Main Application and Scope

This hearing aid is used for compensation of a patient's hearing loss, particularly suitable for individuals with mild to moderate hearing loss.

1.3. Operating Conditions

  • Temperature: 0°C ~ +40°C
  • Humidity: 0%RH ~ 80%RH
  • Rated Voltage: DC1.4V
  • Normal Atmospheric Pressure Range: 86Kpa ~ 106Kpa

Storage and Transportation Condition:

  • Temperature: -20°C ~ +50°C
  • Humidity: 0%RH ~ 93%RH

Allow at least 30 minutes for the device to warm up from minimum storage temperature or cool down from maximum storage temperature before wearing.

1.4. Safety Warnings and Important Information

⚠️ Warning: If you are younger than 18, do not use this device. You should consult a doctor, preferably an ear-nose-throat doctor (an ENT), as your condition requires specialized care. Over-the-counter hearing aids are only for users who are age 18 or older.

  • This product will not restore normal hearing and will not prevent or improve hearing impairment resulting from organic conditions. It is designed to help you make greater use of your remaining hearing.
  • It may take time to become accustomed to new sounds. For best results, use the hearing aids as much as possible. Infrequent use may prevent you from attaining full benefit.
  • It is good practice for a person with hearing loss to have a medical evaluation by a licensed physician (preferably an otolaryngologist, otologist, or otorhinolaryngologist) to ensure all medically treatable conditions are identified and treated.
  • Children with hearing loss: In addition to a medical evaluation, a child with hearing loss should be directed to an audiologist for evaluation and rehabilitation. Hearing loss can affect language, educational, and social development. An audiologist is qualified to assist in their evaluation and rehabilitation.
  • Warning: Hearing aids providing more than 132 dB SPL should be fitted by a professional operator to avoid impairing remaining hearing.
  • Avoid swallowing by children; keep small parts out of children's reach.
  • Biocompatibility and Electromagnetic Compatibility: Our products meet relevant requirements. Keep away from X-ray, MR scans, CT scans, short-wave diathermy, or similar radiation treatments that may impact the product.
  • The hearing aid should only be used for the hearing impaired, not for other applications.
  • Special User:
    • Children cannot wear the hearing aid without adult guidance.
    • Mental patients should consult a physician before wearing a hearing aid.
    • The hearing aid is not applicable for children under age 36 months.

1.5. Life of Product

The estimated life of the hearing aid is 3 years. It is suggested to replace the ear plug once per year and the battery every 60 hours of use under normal conditions.

2. Components and Structure

2.1. Structural Characteristics and Operating Principle

The audible signal is converted into an electrical signal by the microphone and then magnified via an integrated circuit (IC). This electrical signal is then converted back into an audible signal through the receiver. Analog and digital circuits amplify the signal, which the receiver accepts and restores to sound, providing amplification for individuals with hearing loss.

Warning: Please use only the provided accessories that match your hearing aids. Do not use other accessories.

2.2. Parts Diagram

Diagram showing the components of the hearing aid: Earplugs, Mic, Volume Knob, Battery Compartment, and Pull Wire. Also shows different earplug sizes (big, middle, small).
Figure 3: Hearing Aid Components

The hearing aid consists of the following main parts:

  • Ear Dome: The soft tip that fits into the ear canal.
  • Shell: The main body of the hearing aid.
  • Microphone: Picks up sound from the environment.
  • Battery Door: Provides access to the battery compartment.
  • Pull Wire: A small string to assist in removing the hearing aid.
  • Volume Knob (Optional): For adjusting sound level.
  • Button (Optional): For program switching.

Note: The actual parts may vary slightly based on specific product requirements.

3. Setup Instructions

3.1. Installing the Battery

Choose the correct battery type (A10 battery). Gently open the battery door. Use the brush's magnet to hold the positive side of the battery and insert it. Avoid touching the battery directly with your hands. Close the battery door gently. If the door doesn't close easily, check if the battery is installed correctly, ensuring the "+" sign on the battery aligns with the "+" sign on the battery door.

Battery Model Figure:

Battery Model Product Model
10A D-C-C2B, D-C-C1B, D-L-C1B, D-L-C2B, D-L-C1L, D-L-C2L

3.2. Replacing the Earplug

Disassembly: Pinch the earplug with your hand to separate it from the connector.

Assembly: Select the appropriate size of earplug (big, middle, or small). Hold the earplug and correctly insert it into the connector. Ensure the earplug reaches the bottom of the connector to prevent it from falling off.

Diagram showing how to pinch and remove an earplug, and how to attach a new earplug to the hearing aid connector.
Figure 4: Earplug Replacement

3.3. Power On/Off

The battery door also functions as the on/off switch:

  • ON: The battery door is fully closed.
  • OFF: The battery door is open.

If you turn off the hearing aid, wait at least three seconds before turning it on again. Always turn off the hearing aid when not in use to reduce battery consumption.

Some hearing aids may have a Power-On delay feature. If your hearing aid has this feature, it will take several seconds to power up once turned on, allowing you to fit it in your ear before it starts amplifying sound.

3.4. Product Demonstration Video

Video 1: Demonstration of battery installation, cleaning, and wearing the hearing aid.

4. Operation

4.1. Placing the Hearing Aid on the Ear

Turn on the hearing aid before placing it on your ear. Hold the hearing aid with your thumb and forefinger on the outer edges of the case or by the pull wire. Gently insert the canal tip into your ear canal until you feel resistance. Use your forefinger to softly move the hearing aid forward or backward to position it correctly. You can pull the outer ear backward and upward with your other hand to help position it properly.

Diagram showing how to properly insert the left and right hearing aids into the ears.
Figure 5: Proper Placement of Hearing Aids
Image showing a hearing aid correctly placed in an ear, highlighting its discreet design and suitability for mild to moderate hearing loss.
Figure 6: Hearing Aid in Ear and Hearing Loss Table

4.2. Volume Control (Optional)

If your model has a volume knob, rotate it clockwise to gradually increase the volume and counter-clockwise to gradually decrease it.

4.3. Button Control (Optional)

If your model has a program switch button:

  • Short press (1 second): Cycles through different volume levels (e.g., volume drops 3dB with each press until the lowest, then returns to maximum).
  • Long press (2 seconds): Cycles through different program modes.
  • Extra-long press (5 seconds): Enters sleep mode to save power. Press again for 5 seconds to exit sleep mode and return to working status.

If the hearing aid has program memory and operates for 10 minutes or more, it will return to the same setting when turned back on.

4.4. Removing the Hearing Aid

Grasp the device with your thumb and forefinger and gently rotate it as you pull outward. For devices with a pull wire, grasp the pull wire and gently take the hearing aid out of your ear. Never use the battery door to pull the hearing aid out, as this may cause damage.

5. Maintenance and Care

5.1. Cleaning the Hearing Aid

Regular cleaning is crucial to prevent earwax accumulation, which can affect sound quality. Please clean your ear canal and hearing aid earplug regularly.

  • Clean and wipe your hearing aid with a dry, soft cloth.
  • Use the provided brush to clear earwax from the sound hole of the hearing aid.
Image showing a cleaning brush being used to clean the hearing aid's sound hole.
Figure 7: Cleaning the Hearing Aid

Place the hearing aid on a soft surface (e.g., a soft cloth or towel) when cleaning to prevent damage if it falls. Never use any liquid to clean the hearing aid, as this can permanently damage the circuitry.

5.2. Precautions for Hearing Aids

  • Periodic Inspection: Regular check-ups by a hearing aid specialist are recommended to ensure proper function and replace accessories as needed.
  • Moisture-proof: Moisture is a primary concern for hearing aids. Use a special drying box at night to remove moisture and extend the device's life.
  • Waterproof: Do not wear the hearing aid while swimming or in heavy rain. If it accidentally falls into water, do not use a dryer. Dry it with a soft, clean cotton cloth and place it in a ventilated environment. Contact customer service if a failure occurs.
  • Anti-high temperature: Avoid high temperatures or prolonged exposure to direct sunlight.
  • Anti-vibration: Do not drop your hearing aids or knock them against hard surfaces.
  • Batteries: Use the correct battery type. Remove batteries if not using the device for a long time to prevent leakage. Keep batteries out of reach of infants and children to prevent accidental swallowing.

6. Troubleshooting

This table provides solutions for common issues. If the problem persists, please contact your audiologist or customer service.

Failure Cause Solution
Whistling Hearing aid is not worn correctly Correct and wear it again
The volume is too loud Turn down the volume
Cracked hearing aid Contact with the audiologist
Your hands or other objects are very close to the hearing aid / Too much earwax Move your hands or other objects away from ears or confirm sufficient distance / Clean earwax or contact with the audiologist
No sound Power off Turn on
Hearing aid battery is not installed Install the battery
Low battery or no power Replace it with new battery
Dirt blocks the earplug or tube Clean earwax or contact with the audiologist
Small voice / Not clear / Distortion Low battery Replace it with new battery
Hearing loss change Consult the audiologist
Hearing aid is damped Dry it with dry box or contact with audiologist
Dirt blocks the sound tube Clean the sound tube or contact with audiologist
Can't adjust the volume Volume has been placed on the maximum or minimum level Rotate the volume knob in the opposite direction
Dirt blocks the sound tube or earplug Clean or contact with audiologist
High power consumption Hearing aid is still on when not in use Please turn it off when hearing aid is not in use
The battery is expired Check the validity of the battery
Hearing aid is damped Dry it with a dry box or contact with audiologist
Poor battery quality / Local leakage Replace it with new battery / Send it to local service center for maintenance
Intermittent sound Battery failure / Poor contact between battery and battery pole Replace it with new battery / Contact with audiologist

7. Specifications and Model Information

7.1. Technical Specification

For detailed technical specifications, please refer to the product label.

7.2. Product Model List

ITE Model List
D-C-C2B, D-C-C1B, D-L-C1B, D-L-C2B, D-L-C1L, D-L-C2L

7.3. Symbol Information

Symbol Description
ⓘ User Guide must be read / Consult instructions for use
🏭 Manufacturer
fragile Fragile, handle with care
☔ Keep dry
⚠ Caution
📅 Date of manufacture
SN Serial number
⬆ Use-by date
Type B Applied Part Type B Applied Part
🗑️ This marking indicates that the product should not be disposed of with other household wastes at the end of its working life. Recycle responsibly to promote sustainable reuse of materials.
IP22 IP22: The first number 2 indicates protection against solid foreign objects of 12.5 mm and greater. The second number 2 indicates protection against vertically falling water drops when the enclosure is tilted up to 15°.
e The harmful substances in the product meet the limited requirements.

8. Warranty and Support

8.1. Unpacking and Initial Check

Upon receiving your hearing aid, please:

  • Check if all actual parts are in accordance with the accessory list (refer to Figure 8: What You Get).
  • Verify that the model marked on the warranty card is consistent with the hearing aid model.
  • Confirm that the serial number marked on the warranty card matches the hearing aid's serial number.
Image showing the contents of the product package: Instructions, Quick Guide, Battery #10, Earplugs *2, Cleaning Brush, Wax Guard and Tool *2.
Figure 8: What You Get (Package Contents)

8.2. Hearing Aid Warranty

Range for Free Warranty: For any device, failures caused by non-human factors will receive free warranty from the date of purchase.

Exceptions from Free Warranty:

  • Damage caused by incorrect use or improper operation.
  • Disassembly, assembly of parts, or other human-caused damage.
  • Damage caused by irresistible reasons (e.g., floods, fires, earthquakes).
  • Changing the hearing aid model or serial number on the warranty card without authorization.
  • Absence of a warranty card.

The Warranty Period: Please check the warranty period specified on your warranty card.

9. User Tips

  • Initial Adjustment: When first using the hearing aid, start with a lower volume setting and gradually increase it as you get accustomed to the amplified sounds.
  • Whistling (Feedback): If you experience whistling, try adjusting the earplug for a tighter fit, or try a different size earplug. Ensure the hearing aid is fully inserted into your ear canal. Whistling can also occur if your hand or other objects are too close to the hearing aid.
  • Earplug Size: It is recommended to start with a medium (M) size ear dome. If whistling occurs, try a larger ear dome. If the ear dome is too large and uncomfortable, try a smaller size.
  • Battery Life: To maximize battery life, always turn off the hearing aid when not in use by opening the battery door.
  • Regular Cleaning: Make cleaning a daily habit to prevent earwax buildup, which is a common cause of reduced sound quality or no sound.
  • Patience is Key: Adapting to a hearing aid takes time. Be patient with yourself as your brain adjusts to hearing new sounds or sounds differently. Consistent use will yield the best results.

© 2024 Laiwen. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.