Laiwen AS-T1S-SK

Contents

Laiwen CIC Intelligent Sound Amplifier User Manual

Model: AS-T1S-SK

Important Safety Information and Warnings

Warning: If you are younger than 18, do not use this device. You should consult a doctor, preferably an ear-nose-throat doctor (ENT), as your condition requires specialized care. Over-the-counter hearing aids are intended only for users aged 18 or older.

This product will not restore normal hearing and will not prevent or improve hearing impairment resulting from organic conditions. It is designed to help you make greater use of your remaining hearing. It may take time to become accustomed to new sounds. For best results, use the hearing aids as much as possible.

It is good practice for a person with hearing loss to have a medical evaluation by a licensed physician (preferably an otolaryngologist) to ensure all medically treatable conditions affecting hearing are identified.

Hearing aids are capable of providing more than 132 dB SPL. They should be fitted by a professional operator; otherwise, there may be a risk of impairing the remaining hearing.

Special User Conditions:

  • Children cannot wear the hearing aid without adult guidance.
  • Mental patients should consult a physician before wearing a hearing aid.
  • This hearing aid is not applicable for children under 36 months of age.
  • Avoid swallowing by children; keep small parts out of their reach.

Product Overview

The Laiwen CIC Intelligent Sound Amplifier is designed for comfort and effective hearing compensation. Its shape matches the ear canal, providing a secure and comfortable fit. It is suitable for individuals with mild to profound hearing loss, offering clear sound and significant amplification.

Laiwen CIC Hearing Aid features
This image highlights the key features of the hearing aid: Digital Chip Design for advanced sound processing, Light & Good Fit for comfort, Stable Amplification for consistent sound, and a Battery that lasts up to 40 Hours.

The device operates by converting audible signals into electrical signals via a microphone, which are then magnified by an integrated circuit (IC). The amplified electrical signals are then converted back into audible sound by the receiver, compensating for hearing loss.

What's in the Box

Please check the contents of your package against the list below:

  • Hearing Aid Device(s)
  • User Guide (1 Set)
  • Warranty Card (1 Piece)
  • Ear Plugs (1 Set, various sizes)
  • #10 Batteries (at least 1 Piece per device)
  • Cleaning Brush
  • Wax Guard Kit
Contents of the Laiwen CIC Hearing Aid package
The package includes: a compact storage case, the hearing aids, an instruction manual, a quick guide, a wax guard kit, two #10 batteries, two pairs of earplugs, and a cleaning brush.

Setup Guide

1. Installing the Battery

  1. Choose the correct battery type (A10).
  2. Gently open the battery door with your fingers.
  3. Use the magnet on the cleaning brush to hold the positive (+) side of the battery. Avoid touching the battery directly with your hands.
  4. Insert the battery into the compartment, ensuring the positive (+) sign on the battery aligns with the positive (+) indicator inside the battery door.
  5. Slide the brush flat away from the battery to release it.
  6. Gently close the battery door. Do not force it; if it doesn't close easily, check the battery's orientation.

2. Replacing Earplugs

Disassembly: Pinch the earplug with your hand to separate it from the connector on the hearing aid.

Assembly: Select an appropriate size of earplug. Hold the earplug and firmly push it onto the connector until it is securely seated. Ensure the earplug reaches the bottom of the connector to prevent it from falling off.

3. Power On/Off

The battery door also functions as the on/off switch:

  • ON: The battery door is fully closed.
  • OFF: The battery door is open.

If you turn off the hearing aid, wait at least three seconds before turning it on again. Always turn off the hearing aid when not in use to conserve battery life.

Some hearing aids may have a Power-On delay, meaning they will take a few seconds to power up after being turned on. This allows you to place them in your ear before amplification begins.

Operating Instructions

1. Placing the Hearing Aid on the Ear

  1. Turn on the hearing aid before placing it in your ear.
  2. Hold the hearing aid with your thumb and forefinger on the outer edges of the case or by the pull wire.
  3. Gently insert the canal tip of the instrument into your ear canal until you feel slight resistance.
  4. Use the tip of your forefinger to softly move the hearing aid forward or backward to position it correctly in the ear canal.
  5. To help position the hearing aid properly, you can pull the outer ear backwards and upwards with your other hand.
Invisible CIC hearing aid worn in ear
This image shows the compact, nearly invisible CIC hearing aid properly seated within the ear canal.

2. Volume Control

Rotate the volume control:

  • Clockwise: Gradually increases the volume.
  • Counter-clockwise: Gradually decreases the volume.

3. Button Control (Program Switch)

The multi-function button allows for volume adjustments and program switching:

  • Short Press (1 second): Cycles through volume levels. Each short press decreases the volume by 3dB. Once the lowest volume is reached, pressing again will set it to the maximum volume.
  • Long Press (2 seconds): Cycles through different program modes. Press and hold for 2 seconds to hear the next program mode.
  • Extra-Long Press (5 seconds): Enters sleep mode to save power. Press again for 5 seconds to exit sleep mode and resume normal operation.

4. Removing the Hearing Aid

Grasp the device with your thumb and forefinger, then gently rotate it as you pull outward. If your device has a pull wire, grasp the pull wire and gently take the hearing aid out of your ear. Never use the battery door to pull the hearing aid out, as this can cause damage.

Maintenance and Care

1. Cleaning Your Hearing Aid

  • Regularly clean your ear canal and the hearing aid's earplug to prevent earwax accumulation, which can affect sound quality.
  • Clean and wipe your hearing aid with a dry, soft cloth.
  • Use the provided brush to clear any earwax from the sound hole of the hearing aid.
  • Never use any liquid (e.g., water) to clean the hearing aid, as this can permanently damage the circuitry.

2. General Precautions

  • Periodic Inspection: Have your hearing aid regularly inspected by a specialist.
  • Moisture-Proof: Use a special drying box at night to remove moisture and extend the device's lifespan.
  • Waterproof: Do not wear the hearing aid while swimming or in heavy rain. If it accidentally falls into water, do not use a dryer; instead, dry it with a soft cloth and place it in a ventilated environment.
  • Anti-High Temperature: Avoid high temperatures and prolonged exposure to direct sunlight.
  • Anti-Vibration: Do not drop your hearing aid or knock it against hard surfaces.
  • Battery Care: Use only the correct battery type (A10). Remove the battery if the device will not be used for an extended period to prevent leakage. Keep batteries out of reach of infants and children.

Troubleshooting Guide

If you encounter any issues, please refer to the table below. If the problem persists, contact your audiologist or customer service center.

FailureCauseSolution
WhistlingHearing aid not worn correctlyCorrectly wear the device
Volume too loudTurn down the volume
Hands/objects too close to hearing aid, or too much earwaxMove hands/objects away, confirm sufficient distance, clean earwax
No SoundPower offTurn on
Battery not installed, low battery, or no powerInstall battery, replace with new battery
Dirt blocks earplug or tubeClean earwax or contact audiologist
Small voice / DistortionLow batteryReplace with new battery
Hearing loss change, hearing aid dampedConsult audiologist, dry with dry box
Dirt blocks sound tubeClean sound tube or contact audiologist
Can't adjust volumeVolume at max/min levelRotate volume knob opposite direction
Dirt blocks sound tube or earplugClean or contact audiologist
High power consumptionHearing aid still on when not in useTurn off when not in use
Battery expired, poor quality, local leakageCheck validity, replace battery, send for service
Hearing aid dampedDry with dry box or contact audiologist
Battery failureReplace with new battery
Intermittent soundPoor contact between battery and poleContact with audiologist

Specifications

  • Model Number: AS-T1S-SK
  • Brand Name: Laiwen
  • Origin: China Mainland
  • Hearing Loss Suitability: Less than 80dB
  • Battery Type: A10 battery for hearing aids
  • Rated Voltage: DC1.4V
  • Operating Temperature: 0°C to +40°C
  • Operating Humidity: 0%RH to 80%RH
  • Atmospheric Pressure Range: 86Kpa to 106Kpa
  • Storage Temperature: -20°C to +50°C
  • Storage Humidity: 0%RH to 93%RH
  • Product Life: Approximately 3 years
Laiwen CIC Hearing Aid dimensions and battery life
The hearing aid weighs 1.3g and has dimensions of 1.2cm x 1.8cm. It offers long endurance with a battery life of 2-5 days, using replaceable batteries.
Hearing aid fitting range diagram
This diagram illustrates the fitting range for hearing loss up to 80dB HL, showing effective amplification across frequencies from 250Hz to 8KHz.

Warranty and Support

Range for Free Warranty

For any device, failures caused by non-human factors will be eligible for free warranty from the date of purchase. Please refer to your warranty card for the specific warranty period.

Exceptions from Free Warranty

The warranty does not cover damages caused by:

  • Incorrect use or improper operation.
  • Disassembly, assembly of parts, or other human-caused damage.
  • Irresistible reasons (e.g., floods, fires, earthquakes).
  • Changing the hearing aid model or serial number on the warranty card without authorization.
  • Absence of a valid warranty card.

User Tips

  • Battery Supply: The device uses A10 batteries. It is advisable to keep spare batteries on hand, as the package typically includes only one battery per ear.
  • Volume Adjustment: Start with the minimum volume setting and gradually increase it to a comfortable level. The device can be powerful, so a low setting might be sufficient.
  • Whistling Sound: If you experience whistling, ensure the earplug is correctly seated and fits snugly in your ear canal. Try a different size earplug if necessary.
  • Cleaning: Regular cleaning of the earplug and sound hole is crucial for optimal performance and to prevent earwax buildup.
This video demonstrates how to prepare the hearing aid for use, including attaching the ear dome, installing the battery, cleaning the device, and correctly inserting it into the ear.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.