1. Introduction
Thank you for choosing the JENABOM 47 in 1 Cordless Electric Screwdriver Bits Set. This versatile tool is designed for various home improvement and DIY projects, offering convenience, power, and flexibility. Please read this manual carefully before using the product to ensure safe and efficient operation. Keep this manual for future reference.
2. Safety Instructions
General Power Tool Safety Warnings
- Always wear eye protection.
- Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
- Avoid accidental starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
- Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
- Recharge only with the charger specified by the manufacturer.
- Do not use a battery pack or tool that is damaged or modified.
- Do not expose a battery pack or tool to fire or excessive temperature.
- Do not modify or attempt to repair the tool or the battery pack.
3. Package Contents
Your JENABOM 47 in 1 Cordless Electric Screwdriver Bits Set includes the following items:
- 1 x Electric Screwdriver Drill (269 grams)
- 28 x CR-V Screwdriver Bits
- 8 x Socket Wrenches (5-12mm)
- 4 x Long Screwdriver Bits
- 2 x Twist Drill Bits (2.0mm, 3.0mm)
- 1 x Curved Extended Shaft
- 1 x Sleeve Connecting Rod
- 1 x Extended Screw Bits Adapt Rod
- 1 x USB Charging Cord
- 1 x Portable Storage Case
4. Product Overview
Familiarize yourself with the components of your electric screwdriver:
- Durable Chuck
- Rotary Switch
- LED Headlamp
- Positive and Negative Switch (Forward/Reverse)
- Switch Button (Trigger)
- Handle
- Pilot Lamp (Charging Indicator)
5. Setup
5.1 Initial Charging
Before first use, fully charge the screwdriver. The battery is a 1300mAh Li-ion rechargeable battery.
- Connect the USB Charging Cord to the screwdriver's charging socket (5) and to a USB power source (e.g., laptop, car charger, wall adapter).
- The Pilot Lamp (7) will indicate charging status.
- For the first 1-3 charges, charge for approximately 2 hours.
- From the 4th charge onwards, the red light will go out when charging is complete.
- Do not exceed 5 hours of charging time.
5.2 Attaching Bits and Accessories
To attach a screwdriver bit, drill bit, or socket:
- Ensure the screwdriver is off and the forward/reverse switch is in the neutral (locked) position.
- Insert the desired bit into the Durable Chuck (1) until it clicks securely into place.
- To remove, pull the chuck collar forward and pull out the bit.
- For hard-to-reach areas, use the Curved Extended Shaft or Extended Screw Bits Adapt Rod.
6. Operation
6.1 Adjusting the Grip Handle
The screwdriver features a rotation grip handle that allows for two hand-held shapes: straight grip and grab grip (pistol grip).
- To change the grip, hold the product with one hand.
- Press the "PUSH" button (Rotary Switch, 2) at the top of the handle with your thumb.
- Rotate the fuselage to either the straight or grab grip position until it locks.
6.2 Forward/Reverse Operation
- Use the Positive and Negative Switch (4) to select the rotation direction.
- Push the switch to the left for forward (clockwise) rotation to drive screws.
- Push the switch to the right for reverse (counter-clockwise) rotation to remove screws.
- Position the switch in the middle to lock the trigger and prevent accidental operation.
6.3 Using the Screwdriver
- Select the appropriate bit and attach it securely.
- Adjust the grip handle if needed for comfort and access.
- Set the Forward/Reverse switch to the desired direction.
- Place the bit onto the screw head or drilling surface.
- Press the Switch Button (5) to start the screwdriver. The LED Headlamp (3) will illuminate automatically.
- Apply steady, even pressure.
- Release the Switch Button to stop the screwdriver.
7. Maintenance
7.1 Cleaning
- Keep the tool clean to ensure optimal performance.
- Wipe the tool with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the chuck is free of debris.
7.2 Charging and Battery Care
- Recharge the battery when the power diminishes.
- Do not allow the battery to fully discharge for extended periods.
- Store the screwdriver in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Screwdriver does not turn on. | Battery is discharged. | Charge the battery fully. |
| Screwdriver lacks power. | Battery is low. | Recharge the battery. |
| Bit falls out of chuck. | Bit not inserted correctly. | Ensure bit is fully inserted and chuck collar is released to lock it. |
| LED light not working. | Tool not activated. | The LED light activates automatically when the trigger is pressed. If it still doesn't work, contact support. |
9. Specifications
| Feature | Detail |
|---|---|
| Product Type | Rechargeable Cordless Electric Screwdriver |
| Material | PVC + Carbon Chromium Steel |
| Power Source | USB Charging Battery Powered |
| Speed | 250r / min |
| Charging Time | 2 hours (initial charges), max 5 hours total. Red light off indicates full charge (after 4th charge). |
| Voltage | 3.6V |
| Wattage | 4 W |
| Torque | 3.5N/M |
| Weight | 0.35kg (Screwdriver Drill: 269 grams) |
| Usage | Wood Drilling, Metal Drilling, Steel Drilling |
| Battery Type | Li-ion (1300mAh) |
| Input Data | 220V AC 60HZ |
| Charger Input Data | 220V AC 60Hz |
| Charger Output Data | 6V DC, 300mA |
| Acoustic Pressure Level | LPA < 70dB(A) |
10. User Tips
- Versatile Use: This screwdriver is excellent for assembling furniture, installing mini-blinds, window coverings, and various storage or decorative shelves. Its compact size makes it ideal for tight spaces.
- Flexible Shaft: Utilize the included curved extended shaft for reaching screws in awkward angles or confined areas, significantly increasing the tool's versatility.
- LED Light: The integrated LED headlamp is very useful in dimly lit environments or during power outages, ensuring precision and safety.
- Grip Adjustment: Don't forget to adjust the handle between straight and pistol grip for optimal comfort and control depending on the task.
11. Warranty and Support
For any issues or questions regarding your JENABOM 47 in 1 Cordless Electric Screwdriver Bits Set, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
A user manual in PDF format is available for download: View User Manual (PDF)
12. Product Demonstration Video
Watch this video for a visual guide on the product's features and usage: