KuWFi CPE131

Contents

KuWFi 5.8G Outdoor CPE Bridge User Manual

Models: CPE130 / CPE131

Brand: KuWFi

1. Introduction

The KuWFi 5.8G Outdoor CPE Bridge is a high-performance wireless device designed for long-range Wi-Fi transmission. It functions as a signal amplifier and can be configured for Point-to-Point (PTP) or Point-to-Multipoint (PTMP) connections, making it ideal for extending network coverage to remote locations or for outdoor camera monitoring systems. With an IP65 waterproof rating, it is built to withstand various outdoor environmental conditions.

2. Package Contents

Upon unboxing your KuWFi 5.8G Outdoor CPE Bridge, please verify that all the following items are included:

  • 2 x KuWFi 5.8G Outdoor CPE Bridge Units
  • 2 x PoE Adapters (24V/0.5A)
  • 2 x Ethernet Cables
  • Cable Ties
  • Quick Installation Guide (2.4G or 5.8G Version)
  • Quickly Installation Guide (Outdoor Wireless Bridge 2.4G & 5.8G)
Video: Overview of the KuWFi 5.8G Outdoor CPE Bridge and its package contents.
KuWFi 5.8G Outdoor CPE Bridge package contents including two CPE units, PoE adapters, Ethernet cables, and manuals.
Image: The complete set of items included in the KuWFi 5.8G Outdoor CPE Bridge package.

3. Product Overview

The CPE units are white, rectangular devices with 'KuWFi POINT TO POINT' branding. They feature a digital LED display and various ports and indicators for easy setup and monitoring.

Ports and Indicators:

  • WAN Port: 1 x 10/100Mbps RJ45 port, also serves as the POE port.
  • LAN Port: 1 x 10/100Mbps RJ45 port.
  • LED Display: Shows operation mode, channel, and signal strength.
  • F (Function) Button: Used to switch the LED display mode (e.g., H/C blinking).
  • S (Select) Button: Used to select options on the LED display (e.g., change to 'H' or 'C').
  • Reset Button: Press for 15 seconds to revert to default settings; press for 1 second to finish LED display configuration.
  • LED Lights: PWR (Power), WAN, LAN, Wi-Fi indicators.
Diagram showing the ports and LED indicators on the KuWFi CPE unit, including WAN, LAN, Reset, F, S buttons, and the digital display.
Image: Detailed view of the CPE unit's ports, buttons, and LED display.
Dimensions of the KuWFi CPE unit: 165mm height, 60mm width, 40mm depth, with a 90mm top width. Also shows the digital display and port labels.
Image: Physical dimensions and port labels of the KuWFi CPE unit.

4. Specifications

FeatureDescription
Brand NameKuWFi
ModelCPE131
Wi-Fi Transmission Standard802.11ac
Wi-Fi Supported Frequency5G
Wired Transfer Rate100Mbps
WAN Ports1 x 10/100Mbps
LAN Ports1 x 10/100Mbps
Wireless Transmission Rate900Mbps
Max. LAN Data Rate300Mbps
Frequency5 GHz
Antenna TypeInternal 12dBi Panel Antenna
Waterproof LevelIP65
ChipsetMT7628DAN+MT7613AE
Memory64MB RAM
Flash8MB
Size168mm*88mm*47.6mm
PowerPOE 24V/0.5A
Working Temperature-30°C ~ 55°C
Storage Temperature-40°C ~ 70°C
Humidity5%~95% (typical)
ModulationOFDM = BPSK, QPSK, 16-QAM, 64-QAM, DSSS = DBPSK, DQPSK, CCK
PPM±20ppm

5. Setup

Before configuring the Bridge IP, AP Configuration, or Client Configuration, ensure your PC and CPE are properly connected and the PC IP is configured.

5.1. Configure Your PC IP (e.g., 192.168.188.xxx)

  1. Find the network icon in the lower right corner of your screen and click 'Open Network and Internet Settings'.
  2. Select 'Ethernet' and click 'Change Adapter Option'.
  3. Locate the network connection you are using, right-click it, and select 'Properties'.
  4. Double-click 'Internet Protocol Version 4 (TCP/IPv4)'.
  5. Select 'Use the following IP address' and enter an IP address like 192.168.188.xxx (where xxx is a figure from 2 to 254). Ensure this IP address is not the same as the CPE's default IP (192.168.188.253 or 192.168.188.100).
  6. Click 'OK' to save the settings.

5.2. CPE Master/Slave Configuration

  1. For a Master unit, set the physical switch on the CPE to 'H'. For a Slave unit, set the switch to 'C'.
  2. To manually configure a unit as Master: press the 'F' button until the H/C indicator blinks, then press the 'S' button to change it to 'H'. The setting will save automatically in 5 seconds.

5.3. Establishing a Wireless Bridge Connection

The units are typically paired successfully by default (Master AP mode, Slave Repeater mode) from the factory. If you need to establish a new connection or re-establish one after a reset:

  • Point-to-Point (PTP) Connection: Press the reset button for 1 second on both the Master and Slave CPE units simultaneously. The devices will then begin bridging. The Master CPE's default IP is 192.168.188.253, and the Slave CPE's default IP is 192.168.188.100.
  • Point-to-Multipoint (PTMP) Connection: Press the reset button for 1 second on the Master CPE and all desired Slave CPE units simultaneously. The devices will then begin bridging.
Wiring diagrams for wireless bridge setups. One diagram shows a Slave CPE connected to a camera and a monitor. Another shows a Master CPE connected to a router and a DVR. A third diagram illustrates a Point-to-Multi-Point setup with multiple IP cameras connected to Slave CPEs and a Master CPE connected to a DVR and switch.
Image: Example wiring diagrams for Master and Slave CPE units in various network configurations.

6. Operation Modes

The KuWFi CPE Bridge supports several operation modes to suit different networking needs:

  • Wireless AP (Access Point) Mode: The device acts as a central hub for wireless clients to connect to.
  • Wireless Repeater Mode: The device extends the range of an existing Wi-Fi network.
  • Point-to-Point (PTP) Mode: Two CPE units form a direct wireless link, often used to connect two buildings or locations over a long distance.
  • Point-to-Multipoint (PTMP) Mode: One Master CPE unit connects wirelessly to multiple Slave CPE units, commonly used for distributed surveillance systems.
Two KuWFi CPE units shown establishing a 5.8G 900Mbps point-to-point wireless bridge connection over a distance of up to 2KM, with signal waves indicating transmission.
Image: Visual representation of a Point-to-Point wireless bridge connection.

7. Configuration (Web UI)

For advanced settings, network monitoring, and customization, you can access the device's web-based user interface (WebUI).

7.1. Accessing the WebUI

  1. Ensure your PC's IP address is configured within the same subnet as the CPE (e.g., 192.168.188.xxx, as described in Section 5.1).
  2. Open a web browser (e.g., Chrome, Firefox).
  3. In the address bar, type the default IP address of the Master CPE: 192.168.188.253 and press Enter.
  4. When prompted, enter the default password: admin.

7.2. Modifying SSID and Password

Once logged into the WebUI, you can navigate through the menus to change various settings:

  1. Look for sections like 'Wireless Settings' or 'Network Configuration'.
  2. You will find options to modify the SSID (Wireless Network Name) and the Wi-Fi password.
  3. Note that the Slave's SSID is disabled by default. If you need to enable or modify it, you must do so through the management page of the device.

7.3. Other Features Accessible via WebUI

The WebUI also provides access to features such as:

  • Wi-Fi Channel Analysis Tool
  • Watchdog Technology
  • LED display configuration
  • Central Management by WLAN Controller (in AP Mode)

8. Field Applications

The KuWFi CPE Bridge is versatile and can be deployed in various scenarios:

  • Point-to-Point Extension Network: Extend your existing network to a second building or remote location up to 2KM away, providing internet access where cables are impractical.
  • Point-to-Point Extended Camera Monitoring: Establish a dedicated wireless link for a single camera or a small group of cameras to a DVR/NVR system.
  • Point-to-Multi-Point Extended Camera Monitoring: Connect multiple IP cameras spread across a wide area to a central DVR/NVR via several Slave CPEs communicating with a single Master CPE.
Wiring diagrams for wireless bridge setups. One diagram shows a Slave CPE connected to a camera and a monitor. Another shows a Master CPE connected to a router and a DVR. A third diagram illustrates a Point-to-Multi-Point setup with multiple IP cameras connected to Slave CPEs and a Master CPE connected to a DVR and switch.
Image: Various application scenarios for the KuWFi CPE Bridge, including network extension and camera monitoring.

9. User Tips

  • Users have reported effective operation up to a distance of 400 meters, demonstrating good real-world performance.
  • For any bridge connection (Point-to-Point or Point-to-Multipoint), you will need at least two units: one configured as a Master and one or more as Slaves.
  • While the units are often pre-paired for plug-and-play functionality, for initial setup, advanced configurations, or if the units are reset, you may need to configure your PC's IP and access the WebUI.

10. Troubleshooting

  • No Connection/Poor Signal: Ensure a clear line of sight between the CPE units. Obstructions like buildings or dense foliage can significantly degrade performance. Check all cable connections and power supply.
  • Cannot Access WebUI: Verify that your PC's IP address is correctly configured within the 192.168.188.x subnet (e.g., 192.168.188.10). If still unable to access, try resetting the CPE unit to factory defaults by pressing the reset button for 15 seconds.
  • Forgot WebUI Password: Perform a factory reset by pressing the reset button for 15 seconds. The default password is admin.
  • Slow Speed: Check for potential interference from other 5GHz devices. Use the Wi-Fi Channel Analysis Tool in the WebUI to find a less congested channel. Ensure both CPE units are properly aligned.

11. Maintenance

  • Cleaning: Periodically clean the exterior of the CPE units with a soft, dry cloth to remove dust and dirt. Do not use liquid cleaners or solvents.
  • Firmware Updates: Check the official KuWFi website regularly for firmware updates. Keeping your device's firmware up-to-date ensures optimal performance, security, and access to new features.
  • Environmental Protection: Although IP65 rated, ensure the devices are securely mounted and protected from direct, prolonged exposure to extreme weather conditions or physical damage.

12. Warranty and Support

For detailed warranty information, technical support, or further assistance, please refer to the official KuWFi website or contact your authorized retailer. A comprehensive user manual is also available in PDF format for additional instructions and specifications:

User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.