Introduction
This manual provides important operating instructions for the Retekess TR633 AM/FM portable radio. Please read this guide thoroughly before using the radio to ensure safe operation and to understand its features and functions. For a complete PDF version of this manual, please refer to the official document: User manual (PDF).
Product Appearance Description
Familiarize yourself with the components of your Retekess TR633 radio:

Figure 1: Front view of the Retekess TR633 radio.
- Handle
- Frequency indication window
- Built-in speaker
- Function switch (OFF/FM/AM)
- Tuning knob
- Volume knob
- Tuning indicator light
- Power indicator
- Battery compartment
- Telescopic antenna
- Labels
- AC-IN jack
- AM external antenna jack
- Headphone jack

Figure 2: Illustration of the high-power speaker output.
Technical Specifications
| Feature | Specification |
|---|---|
| Frequency range | Europe: FM: 87.5-108MHz, AM: 530-1600kHz USA: FM: 88-108MHz, AM: 520-1710kHz |
| Sensitivity | AM: less than 80dBµ; FM: less than 10dBµ |
| Output power | 0.8W |
| Power supply | DC 6V 4 AA 1.5V batteries / AC 110V or AC 220V |
| Dimensions (WxHxD) | 200X140X63.5mm (from product properties, OCR says 222*79*140mm, using JSON data) |
| Weight | 798g |
| Body Material | Plastic |
| Screen | Yes |
| Battery Included | Yes (This refers to the internal rechargeable battery, not the AA batteries) |
Setup
Power Supply
The radio supports two power supply methods: AC (mains power) and DC (battery power).

Figure 3: Two available charging methods for the radio.
- DC Power (Batteries): Insert 4 AA 1.5V batteries into the battery compartment, ensuring correct polarity as marked.
- AC Power (Mains): Insert the plug of the AC cable into the AC input port (12) on the radio. Connect the other end to a suitable AC power outlet. Please choose the correct voltage (110V or 220V) according to the label on your radio.
Note:
- Battery power will be disconnected automatically when using AC cable power.
- When connecting the TR633 radio to an AC power source, please remove the AA 1.5V batteries from the radio.

Figure 4: Example of a radio with EU plug and 220V voltage specification.
Operation
FM/AM Listening
- Adjust the function switch (4) to the FM/AM position. The red power indicator light (8) will illuminate.
- Rotate the tuning knob (5) and observe the frequency indication window (2) to select a station.
- When a strong signal station is tuned, the green tuning indicator light (7) will illuminate. If the signal is weak, the green light may not illuminate.
- Rotate the volume knob (6) to adjust the sound level.

Figure 5: FM/AM band reception and antenna rotation for optimal signal.

Figure 6: Power and signal indicator lights for tuning assistance.

Figure 7: Design features for easy operation, including large buttons and a beveled screen.
Antenna Operation
- For FM reception: Fully extend the telescopic antenna (10) for the best listening effect.
- For AM reception: The radio uses an internal AM antenna. Rotate the radio body to achieve the best listening effect.
- The radio supports connecting an external AM antenna via the 3.5mm AM external antenna jack (13).
Using Headphones
Insert the earphone plug into the headphone jack (14). The built-in speaker (3) will automatically disconnect, allowing you to listen privately through your earphones.
Turning Off the Power
Turn the function switch (4) to the OFF position to power off the radio.
Note:
- When operating on battery power, if the power indicator light (8) remains red, it indicates that the battery power is below 5% and needs to be replaced or recharged.
Maintenance
- Keep the radio dry. If it gets wet, wipe it dry immediately.
- Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or abrasive cleaners.
- Avoid exposing the radio to extreme temperatures, humidity, or direct sunlight.
- If not using the radio for an extended period, remove the batteries to prevent leakage.
Troubleshooting
- Poor Reception: If you experience poor reception, especially for AM stations, try rotating the radio body or adjusting the telescopic antenna (for FM) to find a better signal. For AM, consider connecting an external AM antenna if available.
- No Power: Ensure batteries are inserted correctly with the right polarity, or that the AC power cable is securely connected to both the radio and a working power outlet. If using batteries, check if they are depleted (red power indicator).
- No Sound: Check the volume knob (6) to ensure it's not set to minimum. If headphones are plugged in, the internal speaker will be muted; unplug headphones to use the speaker.
User Tips
- Plug Type and Voltage: Always pay close attention to the required voltage (AC 110V or AC 220V) and plug type (US, EU, UK) when purchasing and setting up your radio to ensure compatibility with your local power supply.
- Battery Life Indicator: The red power indicator light signals low battery (below 5%), prompting you to replace or recharge batteries.
- Reception Optimization: For best AM reception, try rotating the radio. For FM, fully extend the telescopic antenna.
Safety Information
Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
RF Exposure Information
- DO NOT operate the radio without a proper antenna connected, as this may damage the radio and cause you to exceed RF exposure limits. A proper antenna is the one supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio. The antenna gain shall not exceed the specified gain by the manufacturer.
- To avoid interference, turn off the radio in areas where signs are posted to do so.
- DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.
Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Protect Your Hearing
WARNING
- Use the lowest volume necessary for your task.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding a headset or earpiece.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
- Use caution with earphones; excessive sound pressure from earphones and headphones can cause hearing loss.
Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing can be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.
Approved Accessories
WARNING
- This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations.
- For a list of Retekess-approved accessories for your radio model, visit the official website: http://www.Retekess.com
Warranty and Support
Guarantee Card Information
This guarantee card should be kept by the user. Most new products carry a two-year manufacturer's warranty from the date of purchase.
For warranty and after-sales service, you can:
- Contact the seller where you purchased the product.
- Products may be repaired by our Local Repair Center.
- For warranty service, a receipt or proof of purchase from the actual seller is required for verification.
Exclusions from Warranty Coverage:
- Damage to the product caused by accident.
- Misuse or abuse of the product, or damage resulting from unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
EU Representative Contact
Germany Retevis Technology GmbH
Uetzenäcker 29, 38176 Wendeburg
Email: Retevis-Europa@outlook.com
Tel: +0049 053029369179
Frequently Asked Questions (FAQ)
- Q: How do I charge the radio? Does it come with a charger?
- A: The radio supports two power methods: AC (mains power) and DC (4 AA 1.5V batteries). It comes with an AC power cable. For battery operation, you will need to provide 4 AA batteries (not included). When using AC power, please remove the AA batteries.
Certifications
FCC Requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.
CE Requirements
Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at: www.retekess.com.
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
IC Requirements
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.