1. Product Overview
The Arikasen HD65 True Wireless Earbuds are designed for an immersive audio experience, featuring Bluetooth 5.3 for stable connectivity, Hi-Fi stereo sound, and a durable, waterproof design suitable for sports and active lifestyles. The ergonomic earhooks ensure a secure and comfortable fit.

Package Contents
- Charging Case x 1
- Wireless Earbud x 2
- Type-C Charging Cable x 1
- Instruction Book x 1
- Earbud Tip x 4 (various sizes)
Component Identification

The earbuds feature an LED Indicator Light and a Multi-Function Button (MFB). The charging case includes a Battery Status Indicator and a Type-C Charging Port. Both earbuds have charging contacts and a built-in microphone.
2. Setup and Pairing
Initial Pairing
- Ensure both earbuds and the charging case are fully charged before first use.
- Take both earbuds out of the charging case. They will power on and automatically enter pairing mode.
- If the earbuds do not connect to a device for more than 5 minutes, they will automatically turn off. To manually turn them on, press the MFB button for approximately 3 seconds until you hear "Power on".
- During pairing, one earbud will flash a white light, and the other will flash a white light every three seconds, indicating successful pairing between the earbuds.
- Enable Bluetooth on your phone or device. Search for "HD65" in the list of available devices and select it to connect. You will hear a voice prompt "Connected" when successful.
- If the indicator light on the earbud is off, it signifies a successful connection.

Automatic Connection
By default, the earbuds will automatically connect to the last paired phone when powered on.
Using a Single Earbud
You can use either earbud individually. Simply take one earbud out of the case and connect it to your phone. If both earbuds are connected, you can turn one off manually or place it back in the charging case to use the other alone.
3. Operating Instructions
Telephone Communication
| Function | Action |
|---|---|
| Answer Call | Tap once |
| Hang Up | Tap once |
| Refuse Incoming Call | Press and hold the key for 2 seconds |
Music Control
| Function | Action |
|---|---|
| Play/Pause | Tap once |
| Previous Track | Tap twice on the Left earbud |
| Next Track | Tap twice on the Right earbud |
| Activate Siri (Voice Assistant) | Quickly tap three times |
| Turn Down Volume | Press and hold the key on the Left earbud |
| Turn Up Volume | Press and hold the key on the Right earbud |

4. Charging
Earbuds Charging
- The earbuds will only charge when correctly placed in the charging slots of the case.
- The indicator light on the earbuds will show white when charging.
- The charging case will automatically stop charging the earbuds when they are fully charged, and the earbud indicator lights will turn off.
- When the earbuds are charging, the digital display bar of the case will blink. It turns off when the earphones are fully charged.
Charging Case
- Use the provided Type-C USB charging cable to charge the case directly.
- During charging, the digital display on the case will flash and show the battery level in real-time.
- When fully charged, the display will show "100".
- You can charge the charging case and the earbuds simultaneously, or charge the case first and then the earbuds.

5. Maintenance and Care
Charging Alerts
- If the earbuds do not charge or turn on after a long period of disuse, it may be due to oxidation of the magnet connectors. Clean the magnet connectors on both the earbuds and the charging case with an alcohol wipe to resolve this.
Storage and General Maintenance
- If the earbuds have not been used for more than 3 months, it is recommended to charge them before use.
- Always use a charger approved by the FCC (Federal Communications Commission).
- Do not disassemble the earbuds.
- Children aged 12 and under should use the earbuds under adult supervision.
- Avoid exposing the earbuds to extremely high or low temperatures.
- Do not use the earbuds during a thunderstorm.
- Protect the device from free falls or violent shocks.
- Keep the device away from sources of fire and do not immerse it in water.
6. Troubleshooting (FAQ)
Q: Why don't these earbuds pair with my phone?
A: First, ensure the earbuds are fully charged and powered on, and that your phone's Bluetooth is enabled. If problems persist, turn off the powered-on earbuds by clicking the MFB button 5 continuous and quick times. Then, place them back in the charging case, close the lid, wait 1 minute, open the case, and try reconnecting.
Q: Why does the music cut in or out?
A: Ensure the earbuds are within 10 meters of your phone with no obstacles. If the distance is less than 10m and issues occur, place the earbuds back in the case, close the lid, and on your phone, manually "forget" the "HD65" device. After 10 seconds, open the charging case and reconnect.
Q: Why won't the earbuds charge or disconnect from the phone after I put them in the case and close the lid?
A: Check if the charging case is in a low battery state. If the case battery is low, the earbuds will neither charge nor disconnect. Fully charge the case using a Type-C charging cable.
Q: Are these earbuds sweat- and water-resistant?
A: Yes, these earbuds are sweatproof and IPX7 waterproof. However, it is not recommended to submerge them in water. They are not resistant to hot water, as water vapor can damage internal components. The IPX7 rating means they can withstand immersion in water up to 1 meter for up to 30 minutes, but this product is specifically noted as "not for Swimming or Showering".
Q: What is the microphone quality like?
A: The microphone delivers clear voice transmission during calls, with effective background noise reduction in various environments, ensuring good call quality.
Q: Do these earbuds work with Android phones, specifically Huawei P30?
A: Yes, the earbuds connect easily and work well with various Android phones, including Huawei models, offering stable performance and clear audio.
7. Specifications
| Feature | Specification |
|---|---|
| Bluetooth Version | 5.3 |
| Bluetooth Profiles Supported | HFP/A2DP/HSP/AVRCP |
| Charging Port | Type-C |
| Earbud Battery Life (Single Charge) | 15 hours |
| Total Battery Life (with Charging Case) | 75 hours |
| Earbud Charging Time | 1.5 hours |
| Charging Case Charging Time | 2 hours |
| Transmission Range | 10 meters (without obstacles) |
| Material | ABS, Plastic, Silica Gel |
| Weight | 80g |
| Voice Assistant Built-in | Yes (Apple Siri Support) |
| Sound Isolating | Yes |
| Earcups Type | Sealed |
| Max Output | 98mW |
| Number Of Drivers | 2 |
| Headphone Pads Material | Silicone |
| Magnet Type | Neodymium |
| Driver Diameter | 14.3mm |
| Total Harmonic Distortion | 6% |
| Impedance Range | up to 32 Ω |
| Codecs | AAC, sbc |
| With Microphone | Yes |
| Wireless Connectivity | Yes |
| Support APP | No |
| Waterproof Rating | IPX7 (Sweatproof, not for Swimming or Showering) |
| Frequency Response Range | 20 - 20000Hz |
| Sensitivity | 90dB |
| Plug Type | Line Type |
| Functions | Video Game, Common Headphone, Mobile Phone, HiFi Headphone, Sport, Outdoor, Office, Sleep, Study |
| Active Noise-Cancellation | No |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Communication | Wireless |
| Style | TWS In-ear Headphones |
| Certification | CE, FCC |
| Origin | Mainland China |
| Resistance | 32 Ω |
| Support Memory Card | No |

8. User Tips
- Optimal Sound Quality: Experiment with the included ear tip sizes to find the best fit for your ears. A proper seal significantly enhances sound quality and bass response.
- Volume Control: Take advantage of the volume control buttons directly on the earbuds for convenient adjustments without needing to access your connected device.
- Stable Connection: Users report a stable Bluetooth connection, even during active use like jogging, making them reliable for sports.
- Long Battery Life: The earbuds offer excellent battery durability, with many users praising the extended listening time.
9. Warranty and Support
Activation & Warranty
For permanent replacement of damaged, defective items, or missing components, please activate your warranty via email within 15 days of purchase. Contact: amazon.seller9966@gmail.com
For more detailed product FAQs or customer service inquiries, please contact the seller directly.