ASCELINA WLX024

Contents

ASCELINA LED Wall Lamp User Manual

Model: WLX024

1. Product Overview

The ASCELINA LED Wall Lamp is a modern lighting fixture designed for indoor use, offering both aesthetic appeal and functional illumination. It features an up and down lighting design, available in various lengths and finishes, with options for smart remote control and stepless dimming to suit different ambiance requirements.

Black wavy LED wall lamp illuminating a staircase.
Black wavy LED wall lamp illuminating a staircase.
Gold wavy LED wall lamp installed in a living room.
Gold wavy LED wall lamp installed in a living room.
Two black wavy LED wall lamps mounted on a wall, flanking a television.
Two black wavy LED wall lamps flanking a television.
Gold wavy LED wall lamp installed horizontally above a bed.
Gold wavy LED wall lamp installed horizontally above a bed.
White wavy LED wall lamp installed horizontally above a bed.
White wavy LED wall lamp installed horizontally above a bed.

2. Safety Information

  • Always cut off the power supply or close the main circuit breaker before installation, cleaning, or maintenance.
  • Do not install or use the lamp in flammable or humid places.
  • Ensure all connections are secure and comply with local electrical codes.
  • This product is designed for indoor use only.

3. Installation Guide

3.1. Installation Requirements

  • Check all parts and accessories of the lamp before starting.
  • Ensure the power supply is off.
  • Avoid installing in flammable or humid environments.

3.2. Installation Procedure

  1. Use a screwdriver to secure the lamp's mounting plate to the panel.
  2. Determine and mark the locations where holes need to be punched on the wall.
  3. Confirm the installation area and drill the marked holes.
  4. After drilling, push the rubber plugs into the holes and tap them gently with a hammer if necessary.
  5. Use a screwdriver to fix the pendant (mounting bracket) securely to the wall.
  6. Connect the live wire, ground wire, and neutral wire to the corresponding terminals on the connector.
  7. Restore power and connect the cables to the lamp.
  8. Tighten the screws to firmly fix the lamp onto the wall.
Installation diagram for the LED wall lamp, showing 8 steps with illustrations for mounting, wiring, and securing the fixture.
Detailed installation diagram showing steps for mounting and wiring the wall lamp.

4. Operating Instructions

4.1. Powering On/Off

Once installed and wired correctly, the lamp can be turned on or off using the wall switch or the provided remote control (if applicable to your model).

4.2. Stepless Dimming and Color Temperature Adjustment

For models equipped with remote control, you can adjust the brightness (stepless dimming) and change the light color temperature to create different moods. The available color temperatures typically include:

  • 6000K: Bright eye protection, suitable for tasks requiring high visibility.
  • 4000K: Bright and refreshing, ideal for general daily lighting.
  • 3000K: Soft and warm, perfect for creating a cozy and relaxing atmosphere.
Diagram illustrating the stepless dimming feature with 6000K (bright), 4000K (refreshing), and 3000K (soft and warm) light color temperatures.
Illustration of stepless dimming and color temperature options.

5. Maintenance

5.1. Cleaning

To maintain the appearance and performance of your wall lamp, clean it regularly. Use a soft, dry cloth to wipe down the metal and acrylic surfaces. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by drying with a clean, soft cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.

5.2. Light Source

The LED light source in this fixture is integrated and not user-replaceable. If the LEDs fail, please contact customer support for assistance.

6. Troubleshooting

  • Light not turning on:
    • Check if the power supply is connected and the wall switch is on.
    • Verify all wiring connections are secure as per the installation guide.
    • If using a remote control, ensure its battery is not depleted and there are no obstructions between the remote and the lamp.
  • Dimming or color temperature not working:
    • Ensure the remote control is paired correctly with the lamp (refer to remote control instructions if provided separately).
    • Check remote control battery.
  • Flickering light:
    • Ensure all electrical connections are tight and secure.
    • Verify the voltage supply is stable and within the specified range (90-260V).

If problems persist, please contact customer support.

7. Specifications

Feature Detail
Brand NameASCELINA
Model NumberWLX024 (PL230)
Working Power22W
MaterialMetal (Wrought Iron + Acrylic)
Operating Voltage90 - 260 V AC
Light SourceLED bulbs
Luminous Flux249-2000 Lumens
Lighting Area10-15 square meters
Installation TypeWall Mounted (Assembly)
Is DimmableYes
Switch TypeREMOTE CONTROL
Shade TypeIRON
Shade DirectionUp & Down
Base TypeWedge
StyleModern Style
UseDaily Lighting
CertificationCCC, CE, PSE, ROHS
Warranty2 year

7.1. Dimensions and Package Information

  • Package Length: 52 cm
  • Package Width: 12 cm
  • Package Height: 8 cm
  • Package Weight: 0.8 kg
Diagram showing dimensions for Model A (Black 60cm) LED wall lamp: length 60cm, height 15cm, wall distance 6cm. Material: wrought iron + acrylic. Use space: 5-8 m². Applicable: living room, bedroom.
Dimensions for a 60cm model (Model A).

8. User Tips

  • Power Source: This lamp operates on AC power (90-260V) and is not battery-rechargeable. It requires direct wiring to your home's electrical system.
  • Brightness: The lamp has a working power of 22W, providing ample illumination for areas of 10-15 square meters.
  • Remote Control: If your model includes a remote control, ensure it is within range and has working batteries for optimal dimming and color temperature adjustments.

9. Warranty and Support

This ASCELINA LED Wall Lamp comes with a 2-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the manufacturer directly.

For a more detailed user manual and additional documentation, you may refer to the official PDF document available at: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.