SHIMANO ST-RX600

Contents

SHIMANO GRX ST-RX600 Hydraulic Disc Brake Shifter User Manual

Models: ST-RX600 (1x11s & 2x11s)

1. Important Safety Information

WARNING: Failure to follow these instructions could result in serious injury or death.

General Warnings

  • This product is not a toy and is not suitable for children under 16 years old without adult supervision.
  • Keep all small parts (e.g., screws, pulleys) away from infants and toddlers to avoid choking hazards.
  • Always wear appropriate protective gear (helmet, gloves, knee pads) when operating the bicycle with this derailleur.
  • Do not use the product in traffic without proper training.
  • Ensure the derailleur is correctly installed and adjusted before use. Improper installation may cause chain slippage, leading to falls or serious injury.
  • Do not modify the derailleur's structure or components. Unauthorized modifications void compliance and safety guarantees.
  • This product is not intended for use with children's bicycles (refer to EN 14765 for children-specific requirements).
  • Keep the derailleur away from corrosive substances (acids, solvents) and extreme temperatures to prevent mechanical failure.

Additional Safety Notes

  • Regularly inspect the derailleur for wear, damage, or loose connections.
  • Replace worn parts immediately using genuine Shimano accessories.

2. Product Overview

The SHIMANO GRX ST-RX600 is a hydraulic disc brake dual control lever designed for road and gravel bikes, offering precise shifting and reliable braking performance. It is available in configurations for 1x11-speed and 2x11-speed drivetrains.

SHIMANO GRX ST-RX600 1x11s/2x11s Dual Control Levers

Figure 1: SHIMANO GRX ST-RX600 1x11s/2x11s Dual Control Levers (Front View)

SHIMANO GRX ST-RX600 Dual Control Levers Rear View with Cables

Figure 2: SHIMANO GRX ST-RX600 Dual Control Levers (Rear View with Cables)

3. Setup and Installation

Proper installation is critical for the safe and effective operation of your SHIMANO GRX ST-RX600 levers. It is recommended that installation be performed by a qualified bicycle mechanic.

General Installation Guidelines

  • Mount the levers securely to your handlebars, ensuring they are positioned for comfortable reach and operation.
  • Connect the shift cables to your front and/or rear derailleurs according to your drivetrain configuration (1x11s or 2x11s).
  • Connect the hydraulic brake lines to your disc brake calipers. Ensure all connections are tight and free of leaks.
  • Bleed the hydraulic brake system according to Shimano's official procedures to ensure proper brake function and feel.
  • Adjust derailleur limits and cable tension for smooth and precise shifting across all gears.

For detailed, step-by-step installation instructions, please refer to the official Shimano user manual available in PDF format: SHIMANO GRX ST-RX600 User Manual (PDF).

SHIMANO GRX ST-RX600 2x11s Levers with Cables

Figure 3: SHIMANO GRX ST-RX600 2x11s Levers with Cables Connected

4. Operating Instructions

The SHIMANO GRX ST-RX600 features a DUAL CONTROL LEVER system, integrating both braking and shifting functions into a single unit for intuitive operation.

Shifting

  • Upshift (to a smaller cog/larger chainring): Push the main lever inwards towards the bike frame.
  • Downshift (to a larger cog/smaller chainring): Push the smaller lever (behind the main lever) inwards towards the bike frame.
  • The number of gears shifted depends on the lever throw. A short push shifts one gear, while a longer push can shift multiple gears.

Braking

  • Pull the main lever towards the handlebar to engage the hydraulic disc brakes.
  • Apply brake pressure smoothly and progressively. Avoid sudden, hard braking, especially in turns or on loose surfaces.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your SHIMANO GRX ST-RX600 components.

Maintenance Interval

  • Inspect and lubricate the derailleur every 500km or 3 months, whichever comes first.
  • Regularly inspect the derailleur for wear, damage, or loose connections.
  • Replace worn parts immediately using genuine Shimano accessories.

Environmental Restrictions

  • Do not use in saltwater environments (e.g., coastal areas) without proper corrosion protection. Exposure to saltwater can cause rapid corrosion and component failure.

6. Troubleshooting

If you experience issues with your SHIMANO GRX ST-RX600 levers, consider the following common troubleshooting steps:

Shifting Problems

  • Sloppy or inaccurate shifting: Check shift cable tension. Adjust barrel adjusters on the shifter or derailleur. Ensure cables are clean and free of friction.
  • Chain skipping or falling off: Verify derailleur limit screws are correctly set. Inspect the chain and cassette for wear. Improper installation can cause chain slippage.
  • Difficulty shifting: Check for bent derailleur hanger or damaged derailleur. Ensure shift levers move freely.

Braking Problems

  • Spongy brake lever feel: This indicates air in the hydraulic system. The system needs to be bled.
  • Weak braking power: Check brake pads for wear or contamination. Ensure rotors are clean. Verify hydraulic fluid level and system integrity.
  • Brake rub: Check for misaligned calipers or bent rotors. Ensure wheel is properly seated in the dropouts.

If problems persist after basic troubleshooting, it is recommended to consult a professional bicycle mechanic.

7. Specifications

FeatureSpecification
Brand NameSHIMANO
Model NumberST-RX600
Gears11 Speed
TypeShifter (Dual Control Lever)
ComponentsDerailleurs, Hydraulic Disc Brake
Derailleur Groupset TypeMechanical Derailleur system
OriginJapan
High-concerned chemicalNone
Drivetrain Compatibility1x11s, 2x11s

Usage Restrictions

  • Not Suitable For: Children under 16 years old (without adult supervision).
  • Not Suitable For: Bicycles with wheel sizes below 26" or above 29".
  • Not Suitable For: Electric bicycles with motor power exceeding 250W.
  • Not Suitable For: Off-road use in extreme conditions (e.g., rock climbing, steep descents >30°).

8. User Tips

  • Utilize the PDF Manual: Many users find that installing these levers is easier than expected, especially when following the detailed instructions in the official Shimano PDF manual. Always refer to it for specific steps.
  • Hydraulic System Considerations: If you are installing a new hydraulic system or replacing components, be prepared to route new hydraulic lines and perform a thorough brake bleed. This is a critical step for proper brake function.
  • Verify Authenticity: Ensure you are using genuine Shimano parts for optimal performance and safety.

9. Warranty and Support

This product complies with relevant EU regulations and harmonized standards, including the General Product Safety Directive (GPSD) 2001/95/EC, Mechanical Directive (MD) 2006/42/EC, and REACH Regulation (EC) No 1907/2006.

Manufacturer Information

EU Responsible Person (Authorized Representative)

  • Name: MJCM SARL
  • Country: France
  • Address: 78 avenue des Champs Elysees, Bureau 326, 75008 Paris, France
  • Phone: +33-752907452
  • Email: mjcm190928@gmail.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.