CNCEST OB-255

Contents

CNCEST OB-255 Diamond Core Drilling Machine Instruction Manual

Model: OB-255 | Brand: CNCEST

1. Introduction

The CNCEST OB-255 Diamond Core Drilling Machine is engineered to deliver exceptional performance and precision for professional drilling applications. Equipped with a powerful 4250W copper motor and a no-load speed of 500rpm, this product provides an excellent power source for your drilling work. With a drilling diameter of up to 10 inches (255mm), it offers superior drilling capabilities. This machine also incorporates a highly safe mechanical clutch and overload protection switch settings to ensure user safety during operation.

2. Safety Instructions

WARNING: Read all safety warnings and instructions before operating this machine. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

  • Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves when operating the machine.
  • Ensure the work area is clean, well-lit, and free from obstructions.
  • Keep children and bystanders away while operating the machine.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Ensure the power supply matches the specifications of the machine (110V 60Hz, US Standard plug).
  • Always disconnect the power plug from the power source before making any adjustments, changing accessories, or storing the machine.
  • This machine is designed for wet drilling only. Ensure the water supply system is properly connected and functioning before starting.
  • Do not force the tool. Use the correct tool for your application.
  • This machine is not recommended for drilling holes larger than 10 inches (255mm) in diameter.
  • Note that the drilling bit is not included with this machine. Ensure you use appropriate diamond core drill bits for your application.
  • In case of overload, the overload protection switch will automatically trip to protect the motor. Allow the motor to cool down before resuming operation.
  • The built-in mechanical safety clutch prevents kickback if the drill bit jams, protecting the operator.

3. Product Overview and Features

The CNCEST OB-255 Diamond Core Drilling Machine is constructed from high-quality materials including copper, aluminum, iron, and plastic, ensuring durability and reliability in demanding work environments.

Key Features:

  • Powerful Pure Copper Motor: Delivers 4250W of power with a no-load speed of 500rpm for efficient drilling.
  • Wide Applicability: Capable of drilling diameters up to 10 inches (255mm), suitable for various construction and installation tasks.
  • Adjustable Depth Control: Features a user-friendly lifting handle and precise lifting rack, allowing for drilling depths up to 3.3 feet (1m) and a lifting height of 19.7 inches (50cm).
  • High Safety Mechanisms: Includes a mechanical safety clutch to prevent kickback and an overload protection switch to safeguard the motor.
  • Efficient Heat Dissipation: Multiple heat dissipation holes and a dedicated water pipe connection prevent overheating and prolong tool life.
  • Robust Stability: Hardened frame, thickened base with four adjustable screwed feet, and a non-slip side handle ensure stable operation.
  • Thoughtful Design: Rust-proof iron output shaft with standard threading for good sealing, external carbon brushes for easy replacement, and an aluminum water inlet for durability.
  • Independent Power Switch: Conveniently located for easy and safe operation.

Components:

Diamond Core Drilling Machine with accessories
Figure 3.1: Diamond Core Drilling Machine with included accessories.

The package includes the diamond core drilling machine, a water pipe, two carbon brushes, an English manual, and other necessary accessories for use.

Diamond Core Drilling Machine in use
Figure 3.2: Diamond Core Drilling Machine in operation (Drilling bit not included).
Video 3.1: Demonstration of the Diamond Core Drilling Machine in operation.

4. Specifications

AttributeValue
ModelOB-255
Brand NameCNCEST
MaterialCopper, Aluminum, Iron, Plastic
ColorRed, Silver, Black
StyleModern, Vertical
Motor TypePure Copper Motor
Plug TypeUS Standard
Power SourceCorded Electric
Voltage110V 60Hz
Power Input4250W
Largest Drill Diameter255mm / 10in
No-load Speed500rpm
Lifting Height50cm / 19.7in
Deepest Drill1m / 3.3ft
Water Pipe Length1.5m / 4.9ft
Power Cord Length3.5m / 11.5ft
Gross Weight25kg / 55lbs
Product Size (L*W*H)18*16*92cm / 7.09*6.3*36.22in
Package Size (L*W*H)94*36*24cm / 37*14.2*9.4in
Product dimensions diagram
Figure 4.1: Product dimensions.

5. Setup

Follow these steps to properly set up your diamond core drilling machine:

  1. Unpack and Inspect: Carefully remove all components from the packaging. Inspect for any damage that may have occurred during shipping. Refer to the 'Package Included' list in the Specifications section to ensure all parts are present.
  2. Assemble the Stand: Attach the drilling machine to its stand. The stand consists of a hardened frame and a thickened base with four screwed feet. Securely fasten all connections as per the English manual provided.
  3. Stabilize the Machine: Place the machine on a stable, level surface. Adjust the four screwed feet on the base to ensure maximum stability and prevent wobbling during operation.
  4. Install the Drill Bit: Select the appropriate diamond core drill bit for your material and desired diameter (up to 10 inches). Securely attach the drill bit to the output shaft. Note: Drill bits are not included.
  5. Connect Water Supply: This machine is designed for wet drilling. Connect the provided water pipe (4.9ft long) to the aluminum water inlet on the machine. Ensure the connection is secure and leak-free. Connect the other end of the water pipe to a suitable water source.
  6. Power Connection: Ensure the independent power switch is in the 'OFF' position. Connect the US Standard power plug of the 11.5ft long power cord to a grounded 110V 60Hz power outlet.
  7. Final Checks: Before starting, double-check all connections (drill bit, water pipe, power cord) are secure. Ensure there are no loose parts and that the work area is clear.

6. Operation

Once the machine is properly set up, follow these guidelines for safe and effective operation:

  1. Prepare for Drilling: Mark the drilling location on your material. Ensure the material is securely fixed to prevent movement during drilling.
  2. Start Water Flow: Turn on the water supply to ensure a steady flow of water to the drill bit. This is crucial for cooling the bit and flushing out debris during wet drilling.
  3. Position the Drill: Use the lifting handle and precise lifting rack to position the drill bit directly over the marked drilling point.
  4. Engage Power: Turn the independent power switch to the 'ON' position. The motor will start.
  5. Begin Drilling: Slowly lower the drill bit into the material using the lifting handle. Apply steady, even pressure. Do not force the drill. The machine's 4250W motor and 500rpm no-load speed are designed for efficient cutting.
  6. Monitor Progress: Observe the drilling process. If the drill bit jams or encounters excessive resistance, the mechanical safety clutch will engage to prevent kickback. If the motor experiences an overload, the overload protection switch (DZ47-63 D18) will trip, cutting power to protect the motor.
  7. Adjust Depth: Use the lifting handle to control the drilling depth. The machine can drill up to 3.3 feet (1m) deep.
  8. Complete Drilling: Once the desired depth is reached, slowly retract the drill bit from the hole.
  9. Shut Down: Turn the independent power switch to the 'OFF' position. Turn off the water supply.
  10. Clean Up: Disconnect the power cord and clean the machine and work area.
Overload protection switch detail
Figure 6.1: Close-up of the DZ47-63 D18 circuit breaker/overload protection switch.
Water inlet detail
Figure 6.2: Close-up of the aluminum water inlet for wet drilling.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your drilling machine:

  • Cleaning: After each use, clean the machine thoroughly, especially around the drill bit area, water inlet, and heat dissipation holes. Remove any debris or slurry buildup.
  • Carbon Brushes: The machine features external carbon brushes for easy access. Periodically check the wear of the carbon brushes. Replace them when they are worn down to their limit to maintain motor efficiency. Refer to the manual for specific replacement instructions.
  • Water Inlet: Ensure the aluminum water inlet remains free from corrosion and blockages. Clean it regularly to maintain proper water flow for cooling.
  • Output Shaft: Inspect the iron output shaft for any signs of rust or damage. Keep it clean and lightly lubricated if necessary to ensure smooth operation and good sealing performance.
  • Heat Dissipation: Keep the multiple heat dissipation holes on the motor housing clear of dust and debris to ensure efficient cooling.
  • Storage: Store the machine in a dry, clean, and secure location, out of reach of children. The vertical layout is space-saving for storage.

8. Troubleshooting

This section addresses common issues you might encounter with your diamond core drilling machine:

ProblemPossible CauseSolution
Machine does not startNo power supply; Power switch off; Overload protection tripped; Worn carbon brushes.Check power connection; Ensure switch is ON; Reset overload protection (if tripped); Inspect and replace carbon brushes.
Motor stops during operationOverload protection tripped; Drill bit jammed.Reduce drilling pressure; Clear any obstructions; Allow motor to cool and reset overload protection.
Excessive vibration or noiseLoose drill bit; Unstable setup; Damaged drill bit.Tighten drill bit; Ensure machine is stable on its base; Replace damaged drill bit.
Poor drilling performanceWorn drill bit; Insufficient water flow; Incorrect drilling technique.Replace drill bit; Check water supply and clear water inlet; Apply steady, even pressure.
Water leakage from connectionsLoose water pipe connection; Damaged seals.Tighten water pipe connections; Inspect and replace any damaged seals.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 CNCEST. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.