Honda CB500F CBR500R

Contents

Motorcycle Rear Seat Cover Fairing Instruction Manual

For Honda CB500F & CBR500R (2016-2022)

1. Introduction

This manual provides instructions for the proper installation, operation, and maintenance of your new motorcycle rear seat cover fairing. Designed specifically for Honda CB500F and CBR500R models manufactured between 2016 and 2022, this accessory enhances the aesthetic appeal of your motorcycle by replacing the passenger seat with a sleek, aerodynamic cover.

Please read this manual thoroughly before installation and use to ensure safe and correct application.

2. Safety Information

Failure to follow these safety instructions may result in injury or damage to your motorcycle.

  • Do not adjust the seat cover while riding.
  • This product is not intended for use by children.
  • Avoid loosening the mounting screws during high-speed operation. Ensure all fasteners are securely tightened before riding.

3. Package Contents

Please verify that all components are present before beginning installation:

  • Rear Seat Cover Fairing (1 unit)
  • Mounting Screws (quantity as required for installation)

4. Specifications

Feature Specification
Product Name Motorcycle Modification Parts (Rear Seat Cover Fairing)
Compatible Motobike Make Honda
Compatible Models CB500F, CBR500R (Years: 2016-2022)
Item Weight 1kg
High-concerned chemical None
Origin Mainland China
Package Dimensions (approx.) Length: 35cm, Width: 30cm, Height: 10cm

For a detailed user manual in PDF format, please refer to the official PDF document.

5. Installation and Setup

Follow these steps to install the rear seat cover fairing:

  1. Prepare the Motorcycle: Ensure the motorcycle body is clean before installation. Remove any dirt, dust, or debris from the area where the seat cover will be installed.
  2. Remove Existing Seat (if applicable): If a passenger seat is currently installed, carefully remove it according to your motorcycle's service manual.
  3. Position the Fairing: Place the new rear seat cover fairing onto the designated area, aligning it with the mounting points.
  4. Install Mounting Screws: Install the provided mounting screws according to the instructions. Hand-tighten first to ensure proper alignment, then use appropriate tools to secure them firmly. Do not overtighten.
  5. Adjust Angle: Adjust the angle of the fairing to a comfortable and aesthetically pleasing position. Once satisfied, ensure all screws are fully tightened.
Motorcycle with matte black rear seat cover installed
Image: Matte Black Rear Seat Cover Fairing installed on a Honda CB500F/CBR500R.
Orange rear seat cover fairing
Image: Top view of an Orange Rear Seat Cover Fairing.

6. Operating Instructions

The rear seat cover fairing is a static accessory designed to replace the passenger seat for a sportier look. Once installed, no further operation is required. Ensure it is securely fastened before each ride.

7. Maintenance

To keep your rear seat cover fairing in optimal condition:

  • Cleaning: Clean the fairing regularly with a soft cloth and mild soap solution. Avoid abrasive cleaners or solvents that could damage the finish.
  • Inspection: Periodically check all mounting screws for tightness. Vibrations from riding can cause fasteners to loosen over time.
  • Storage: If removing the fairing for storage, keep it in a clean, dry place away from direct sunlight and extreme temperatures to prevent material degradation.

8. Troubleshooting

If you encounter any issues with your rear seat cover fairing, consider the following:

  • Loose Fit: If the fairing feels loose, re-check all mounting screws and ensure they are tightened correctly. Avoid overtightening, which can strip threads.
  • Scratches/Damage: Minor scratches can sometimes be buffed out with appropriate plastic polish. For significant damage, replacement may be necessary.
  • Difficulty Installing: Ensure you have the correct model year fairing for your motorcycle. Double-check alignment before tightening screws.

9. User Tips

  • For a seamless look, ensure the fairing color matches or complements your motorcycle's existing paintwork.
  • Consider applying a protective wax or sealant to the fairing's surface to maintain its shine and protect against UV damage.
  • Always use the correct tools for installation to prevent damage to the screws or the fairing itself.

10. Warranty and Support

For any questions, support, or warranty claims, please contact the manufacturer directly:

  • Manufacturer: Guangzhou Yilong International Trade Co., LTD
  • Address: CN-Shop 9050, Guangzhou Baiyun Motorcycle Parts Wholesale Market Management Co., LTD., No. 316 Zengcha Road, Baiyun District, Guangzhou, Guangdong, China Zip Code: 510000
  • Email: 760398594@qq.com
  • Tel: +86 18679461345

For EU customers, you may also contact the authorized representative:

  • Name: SUCCESS COURIER SL
  • Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
  • Tel: 34-910602659
  • E-mail: successservice2@hotmail.com

© 2023 East yat Store. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.