E27 E27

Contents

E27 Radar Induction Lamp Holder User Manual

Model: E27

1. Product Overview

The E27 Radar Induction Lamp Holder is an advanced lighting adapter designed for automatic light activation based on motion detection. Utilizing microwave radar technology, it provides hands-free lighting, making it ideal for various indoor and outdoor applications such as garages, basements, corridors, and terraces. This device automatically turns lights on when motion is detected and off after a period of inactivity, contributing to energy saving.

Exploded view of E27 Radar Induction Lamp Holder assembly
Figure 1: Exploded view of the E27 Radar Induction Lamp Holder showing bulb, adapter, and fixture connection.

2. Specifications

Feature Detail
Model Number E27
Item Type Lamp Bases
Base Material ABS
Voltage 85-265V
Induction Type Radar (Microwave)
Induction Angle >180 degrees
Induction Distance 0-7 meters
Delay Time (after no motion) 30 seconds
Certification CE
Origin Mainland China
Dimensions (Diameter x Height) 52mm x 90mm
Dimensions of the E27 Radar Induction Lamp Holder
Figure 2: Product dimensions showing a diameter of 52mm and a height of 90mm.

3. Installation

Follow these steps to correctly install your E27 Radar Induction Lamp Holder:

  1. Ensure Power is Off: Before starting any electrical work, always turn off the power to the light fixture at the circuit breaker to prevent electric shock.
  2. Prepare the Bulb: Screw your E27 base light bulb firmly into the E27 Radar Induction Lamp Holder.
  3. Install the Holder: Screw the assembled lamp holder (with bulb) into your existing E27 light fixture. Ensure it is securely tightened.
  4. Restore Power: Turn the power back on at the circuit breaker.
  5. Test Functionality: Test the lamp holder by moving within its detection range. The light should turn on automatically.
Installation steps for E27 Radar Induction Lamp Holder
Figure 3: Visual guide for installing the E27 Radar Induction Lamp Holder into a ceiling fixture.

4. Operating Instructions

The E27 Radar Induction Lamp Holder operates automatically based on motion detection:

  • Automatic Activation: When the radar sensor detects movement of an object within its 0-7 meter range and >180 degree angle, the connected light bulb will immediately turn on.
  • Automatic Deactivation: After motion is no longer detected, the light will remain on for approximately 30 seconds (go away delay) before automatically turning off. This delay ensures continuous illumination while you are present in the area.
  • Energy Saving: The automatic on/off functionality helps conserve energy by ensuring lights are only active when needed.

5. Maintenance

To ensure optimal performance and longevity of your radar induction lamp holder, follow these simple maintenance guidelines:

  • Cleaning: Periodically wipe the surface of the lamp holder with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
  • Avoid Obstructions: Ensure the sensor area is not obstructed by furniture, decorations, or other objects that could interfere with motion detection.
  • Environmental Conditions: While suitable for outdoor use, protect the device from direct heavy rain or extreme weather conditions to prolong its lifespan.
  • Power Cycle: If the device behaves unexpectedly, try turning off the power at the circuit breaker for a few minutes, then turn it back on.

6. Troubleshooting

If you encounter issues with your E27 Radar Induction Lamp Holder, refer to the following troubleshooting steps:

Light does not turn on:

  • Check Power: Ensure the power supply to the fixture is active.
  • Check Bulb: Verify that the light bulb is correctly screwed in and is functional. Try testing with a different, known-good bulb.
  • Motion Detection: Confirm that there is actual motion within the sensor's range (0-7 meters) and angle (>180 degrees).
  • Obstructions: Check for any obstructions blocking the sensor's field of view.

Light stays on or does not turn off:

  • Continuous Motion: Ensure there is no continuous or intermittent motion within the detection range. Even subtle movements (e.g., pets, swaying curtains, vibrations) can trigger the sensor.
  • Interference: Microwave sensors can sometimes be triggered by motion through thin walls or doors. Consider the placement of the sensor relative to adjacent areas.
  • Delay Time: Remember the light has a 30-second delay after the last detected motion before it turns off. Wait for this period to elapse.
  • Power Cycle: Turn off the power to the fixture for a few minutes and then restore it. This can reset the sensor.

Light turns on/off too frequently or inconsistently:

  • Sensor Placement: Adjust the position of the lamp holder to optimize its detection area and minimize false triggers from unwanted motion sources.
  • Environmental Factors: Rapid changes in temperature or strong air currents can sometimes affect sensor performance.

7. User Tips

  • Optimal Placement: For best results, install the lamp holder in areas where motion is expected to occur directly within its detection zone, avoiding areas with constant background movement if possible.
  • Understanding Delay: Be aware of the 30-second delay. If the light doesn't turn off immediately after you leave, it's likely functioning as intended, waiting for the delay period to expire.
  • Testing Environment: When testing, ensure no other sources of motion are present to accurately assess the sensor's response.

8. Warranty and Support

For any issues not covered in this manual or for further assistance, please contact the seller or refer to the official product documentation. A detailed user manual in PDF format may be available for download from the product page or by contacting customer support.

For additional item guides and documents, please refer to the User manual (PDF).

© 2024 All rights reserved. This manual is for informational purposes only.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.