1. Introduction
Thank you for choosing the Homefish Smart Soap Dispenser P10. This touchless, motion-sensing device is designed to provide a hygienic and convenient handwashing experience. It can be used with various liquid soaps and offers adjustable dispensing volumes. Please read this manual carefully before use to ensure proper operation and maintenance.
2. Specifications
| Feature | Detail |
|---|---|
| Model Number | P10 |
| Rated Power | 1.5W |
| Power Supply | Lithium Battery |
| Turn On Method | Touch + Sensor |
| Sensing Speed | 0.25s |
| Sensing Distance | 0-70mm |
| Dispensing Time (4 gears) | 0.3s / 0.8s / 1.5s / 2.0s |
| Bottle Capacity | 420ml |
| Net Weight (without soap) | 261g |
| Gross Weight (without soap) | 377g |
| Working Temperature | 5°C ~ 35°C |
| Waterproof Grade | IPX5 |
| Working Humidity | 0% ~ 85% |
| Charging Port | Type C USB |
| Charging Parameters | 5V-1A |
| Charging Time | About 3 hours |
| Usage Times (per charge) | About 2000 times |
| Working Mode | Infrared Induction |
| Product Size (L x W x H) | 126mm x 92mm x 173mm |
| Origin | Mainland China |
| Certifications | RoHS, FCC, CE |
3. Setup
- Unscrew the Bottle: Turn the bottle 90 degrees counter-clockwise to detach it from the main unit.
- Fill with Liquid Soap: Fill the bottle with your preferred liquid soap. Ensure the soap is suitable for automatic dispensers. If using foaming soap, dilute it with water (refer to User Tips for recommended ratios). Do not overfill.
- Reattach the Bottle: Align the bottle mouth with the body's card position. Rotate the bottle 90 degrees clockwise until it is securely fastened.
- Placement: The dispenser can be placed on a countertop or mounted on a wall using the provided wall-mounted panel. Ensure the surface is clean and dry before attaching the panel.
- Initial Cleaning (Optional): For first-time use or after refilling, you may run the cleaning mode (see Operating Instructions) to prime the dispenser and ensure smooth operation.
4. Operating Instructions
Power On/Off
- Turn On: Press the touch area briefly. LED1 will light up for 2 seconds.
- Turn Off: Long press the touch area for 2 seconds. LED1 and LED4 will flash for 3 seconds before turning off.
Adjusting Dispensing Volume (Gear Switch)
Press the power button to cycle through the four dispensing gears:
- 1st Gear: LED1 lighted (0.3s dispensing)
- 2nd Gear: LED1, LED2 lighted (0.8s dispensing)
- 3rd Gear: LED1, LED2, LED3 lighted (1.5s dispensing)
- 4th Gear: LED1, LED2, LED3, LED4 lighted (2.0s dispensing)
Automatic Sensing
Place your hand below the dispensing mouth, keeping it within a distance range of 0-70mm. The machine will automatically dispense the soap.
Cleaning Mode
To activate cleaning mode, turn on the machine and then triple-click the power button. The machine will automatically run the cleaning cycle for 10 seconds. You can also click the power button again to stop it manually.
Standby Mode
The soap dispenser will automatically enter standby mode if it is not used for a long time. There is no need to manually turn it off.
5. Maintenance
- Cleaning the Surface: If cleaning is needed, turn off the device and gently wipe the surface with a wet towel. Do not immerse the product in water or rinse it directly with water to avoid short circuits.
- Charging Port Protection: After charging, ensure the soft rubber plug of the charging port is securely re-inserted to prevent water from entering.
- Long-Term Storage: If the product will be unused for an extended period, remove the hand sanitizer from the bottle to prevent deterioration of the liquid. Store the product in a cool place, away from direct sunlight or heat sources.
- Handling Liquid Spills: If the dispenser is tilted, sprays water, or is upside down, check immediately if liquid has entered the machine. If necessary, wipe it dry before continuing use.
- Refilling: When installing or replacing hand sanitizer, do not tilt the bottle body excessively. A small amount of liquid flow is normal; wipe it off and continue use.
6. Troubleshooting
| Failure Phenomenon | Cause of Issue | Solution |
|---|---|---|
| Can't switch machine | The battery is exhausted | Charge by power supply |
| Indicator LED does not shine | Product is not turned on | Boot properly (press touch area briefly) |
| Does not dispense | Liquid soap is finished | Change liquid soap |
| The indicator flashes quickly | The sensor is covered by soap | Shut down, wipe the sensing area, and restart |
7. User Tips
- Soap Dilution for Foam: For optimal foaming, mix liquid soap with water. A common recommended ratio is 1 part soap to 3 parts water (e.g., 100ml soap with 300ml water). Adjust as needed for desired foam consistency.
- Versatile Placement: The dispenser is designed for both countertop use and wall mounting. Choose the option that best suits your space and convenience.
- Battery Life: The built-in rechargeable battery provides long-lasting power, typically several weeks of use on a single charge, supporting approximately 2000 dispensing cycles.
- Using Gel or Shower Gel: While designed for liquid soap, gel-type soaps or shower gels can also be used effectively if properly diluted with water to achieve a suitable viscosity for dispensing.
- No Drips: The dispenser is designed to prevent drips, ensuring a clean and tidy environment around your sink.
8. Safety Information & Support
Important Safety Notes:
- This unit and its accessories are not toys. Keep out of reach of children.
- Do not pull the power cord with wet hands. Ensure the adapter and power cord are dry before use.
- The product contains a built-in rechargeable battery. Do not dispose of it in fire, or charge/use/store it in high-temperature environments.
- Do not use if the power cord or adapter is damaged, or if the power cord socket is loose.
- Do not disassemble the body to replace the battery.
- Do not knock or drop the product. If damaged due to collision or fall, discontinue use.
- Persons with physical or mental impairments, or lacking relevant experience/knowledge (including children), should only use the device under supervision.
Additional Resources:
For a more detailed user manual and additional documents, please refer to the official PDF guide available at: Homefish Smart Soap Dispenser P10 User Manual (PDF).