1. Introduction
Thank you for choosing the SMAEL 8038 Sport Watch. This manual provides detailed instructions for the proper use, setup, and maintenance of your watch. Please read it carefully to ensure optimal performance and longevity of your device.

Figure 1: SMAEL 8038 Sport Watch (Example Color)
2. Watch Components and Button Functions
Familiarize yourself with the watch's buttons and their functions:

Figure 2: Watch Button Layout and Functions
- A Key (LIGHT): Activates the EL backlight.
- B Key (MODE): Cycles through display modes (Normal Time, Chronograph, Alarm, Time Setting).
- C Key (RESET): Used for resetting functions or adjusting flashing items during setting.
- D Key (START): Used for starting/stopping chronograph, or selecting items during setting.
- E Key (LIGHT): Activates the EL backlight (same as A Key).
3. Operational Manual
3.1. Normal Time Display
In normal mode, the watch displays Hour, Minute, Second, Month, Day, and Week. The analog hands also show the current time.
To activate the backlight, press either the A Key or E Key. The EL backlight will illuminate for approximately 3 seconds, making the digital display visible in low-light conditions.

Figure 3: Luminous Display in Action
3.2. Chronograph (Stopwatch)
- From the normal time display, press the B Key twice to enter Chronograph mode. The display will show "00:00:00".
- Press the C Key to start the stopwatch.
- Press the C Key again to stop the stopwatch.
- While the stopwatch is stopped, press the D Key to perform a split count (display the current lap time without stopping the timer).
- To return to normal time display, press the B Key.
3.3. Daily Alarm
- From the normal time display, press the B Key once to enter Alarm mode. The display will show the alarm time.
- In Alarm mode, press the C Key to toggle the Alarm and Hourly Chime ON or OFF.
- To set the alarm time:
- While in Alarm mode, press the D Key once; the hour digits will start flashing.
- Press the C Key to adjust the hour.
- Press the D Key again; the minute digits will start flashing.
- Press the C Key to adjust the minute.
- Press the B Key to return to normal mode.
3.4. Time Setting
- From the normal time display, press the B Key three times to enter Time Setting mode. The "Seconds" digits will start flashing.
- Press the D Key to select the item you wish to adjust. The sequence is: Seconds → Hour → Minute → Month → Day → Day of Week.
- While an item is flashing, press the C Key to adjust its value.
- Once all settings are complete, press the B Key to exit Time Setting mode and return to normal time display.
- The watch supports 12/24-hour format selection. This is typically adjusted within the hour setting cycle; press C key to toggle between AM/PM (12H) and H (24H).
4. Maintenance and Care
4.1. Water Resistance
Your SMAEL 8038 watch is rated for 5ATM (50 meters) water resistance. This means it is suitable for daily use, showering, and swimming in shallow water. However, it is crucial to:
- NEVER push any buttons while the watch is submerged in water.
- Avoid exposing the watch to hot water or steam (e.g., hot showers, saunas), as this can compromise the seals.
- After swimming in saltwater, rinse the watch with fresh water and dry it thoroughly.

Figure 4: Water Resistance Feature
4.2. Cleaning
Wipe the watch case and band regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying.
4.3. Battery Replacement
When the display becomes dim or the watch stops functioning, the battery may need replacement. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance are maintained.
5. Troubleshooting
If you encounter issues with your watch, try the following:
- Display is blank or dim: The battery may be low and needs replacement.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though this model does not have a specific lock). Try pressing buttons firmly. If unresponsive, a battery issue might be the cause.
- Time is inaccurate: Re-set the time following the "Time Setting" instructions. If the inaccuracy persists, the battery may be weak or the movement may require service.
- Water inside the watch: Immediately stop using the watch and seek professional service. This indicates a breach in the water-resistant seals.
For persistent issues, please contact customer support.
6. Specifications

Figure 5: Watch Parameters
| Feature | Specification |
|---|---|
| Brand | SMAEL |
| Model Number | 8038 |
| Movement | Quartz, Dual Display, Digital |
| Display Type | Analog-Digital |
| Water Resistance Depth | 5Bar (50 Meters) |
| Features | Back Light, Auto Date, Alarm, Stopwatch, Week Display, Swim |
| Case Material | Acrylic |
| Case Shape | Round |
| Case Thickness | 18mm |
| Case Width | 52mm |
| Dial Window Material Type | Acrylic |
| Band Material Type | PU (Polyurethane) |
| Band Width | 22mm |
| Band Length | 220mm (8.66 inches) |
| Wearing Range | 150mm - 220mm |
| Clasp Type | Buckle |
| Weight | 66g |
| Bottom Cover | Stainless Steel |
7. User Tips
- Durability: Users have noted the watch's resistance to daily wear and tear, making it suitable for active lifestyles.
- Swimming: The 50M water resistance is effective for swimming; however, always remember the critical rule: do not press any buttons while the watch is wet or submerged.
- Strap Replacement: If you need a replacement silicone strap, it is recommended to contact the original seller or manufacturer for compatible parts.
8. Warranty and Support
For any warranty claims, technical support, or inquiries regarding your SMAEL 8038 Sport Watch, please contact the seller directly through your purchase platform. Keep your purchase records handy for faster service.
A detailed user manual in PDF format may also be available for download from the seller's product page or directly at: SMAEL 8038 User Manual (PDF).