Introduction
This manual provides essential information for the proper installation, function, and maintenance of your POKESS Engine Oil Drain Plug. Designed for specific Ford, Mazda, and Honda models, this component is crucial for sealing your engine's oil pan and facilitating oil changes. Please read all instructions carefully before proceeding with installation or maintenance.

Safety Information
Failure to follow these safety instructions may result in damage to the product or personal injury.
- Always wear appropriate personal protective equipment, including safety glasses and gloves, when working on vehicles.
- Ensure the engine is cool before attempting to drain oil to prevent burns from hot oil or engine components.
- Keep the product and tools out of reach of children.
- Inspect the oil drain plug and washer for any damage before each use; do not use if damaged.
- Do not expose the product to water or moisture unnecessarily.
- Handle with care to avoid cuts or injuries from sharp edges or tools.
- Dispose of used engine oil and old parts responsibly according to local regulations.
Product Overview
The POKESS Engine Oil Drain Plug is a replacement component designed to seal the oil pan of compatible vehicles, preventing oil leaks and allowing for controlled drainage during oil changes. It comes with a new washer to ensure a proper seal.
Compatibility
This oil drain plug is compatible with various models, including:
- Ford Edge (2004 - 2017)
- Ford Taurus (2004 - 2017)
- Mazda (2004 - 2017)
- Honda (2004 - 2017)
Important: Always double-check the Original Equipment (OE) number and confirm compatibility with your specific vehicle model, year, and engine before purchase and installation. The OE number of this part should be 100% identical to your original broken part. If the OE number is incorrect, do not install and contact the seller immediately.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | POKESS |
| Item Type | Engine Bonnets (Oil Drain Plug) |
| Thread Specification | M12x1.5 |
| Head Width | 20mm (0.79") |
| Total Height | 19mm (0.75") |
| Item Weight | 0.05kg |
| Material | Durable Metal Construction |
| Origin | Mainland China |


Installation
Follow these steps for proper installation of the engine oil drain plug:
- Pre-Installation Check:
- Verify the OE number of this part is 100% identical to your original broken part. If the OE number is incorrect, do not install; contact the seller immediately.
- Check package contents: Ensure the main part (oil drain plug) and the new washer are present.
- Confirm vehicle model, year, and position match the product's compatibility.
- Preparation:
- Gather necessary tools: appropriately sized wrench or socket, oil drain pan, new engine oil, funnel, and a torque wrench.
- Ensure the engine is cool to the touch to avoid burns.
- Position the vehicle on a level surface and engage the parking brake. If lifting the vehicle, use appropriate jack stands for safety.
- Locate and Drain Old Oil:
- Locate the oil drain plug on the bottom of the engine's oil pan.
- Place the oil drain pan directly beneath the plug.
- Carefully loosen and remove the old drain plug. Be prepared for oil to flow out immediately.
- Allow all the old oil to drain completely.
- Clean the Area:
- Wipe around the drain hole on the oil pan to remove any residual oil or debris.
- Install the New Drain Plug:
- Ensure the new washer is placed onto the new POKESS oil drain plug. Never reuse an old washer.
- Carefully thread the new drain plug into the oil pan by hand. Ensure it threads smoothly without resistance to avoid cross-threading.
- Once hand-tight, use your wrench or socket to snug the plug.
- Torque to Specification:
- Using a torque wrench, tighten the drain plug to the vehicle manufacturer's specified torque setting. Refer to your vehicle's service manual for the exact torque value. Over-tightening can strip threads, while under-tightening can cause leaks.
- Refill Oil and Check for Leaks:
- Refill the engine with the recommended amount and type of new engine oil.
- Start the engine and let it run for a few minutes.
- Turn off the engine and carefully check around the drain plug for any signs of oil leakage.

Function and Usage
The POKESS Engine Oil Drain Plug serves as a critical component in your vehicle's lubrication system. Its primary function is to securely seal the opening of the oil pan, preventing engine oil from leaking out during normal operation. During routine oil changes, the plug is removed to allow the old, contaminated oil to drain from the engine, after which a new plug (or the old one with a new washer) is installed to seal the system for fresh oil.
Maintenance
Proper maintenance of your oil drain plug ensures engine longevity and prevents costly oil leaks.
- Washer Replacement: Always replace the crush washer with a new one every time you perform an oil change. The washer is designed to deform and create a tight seal, and reusing it can lead to leaks.
- Plug Inspection: During each oil change, visually inspect the oil drain plug for any signs of wear, corrosion, or thread damage. If the threads appear stripped or damaged, or if the plug head is rounded off, it should be replaced.
- Leak Checks: Regularly check around the oil drain plug area for any signs of oil leakage, especially after an oil change.
Troubleshooting
If you encounter issues with your oil drain plug, consider the following common problems and solutions:
Oil Leakage from Drain Plug
- Cause: Incorrect Torque
Solution: The plug may be either under-tightened or over-tightened. Re-tighten the plug to the vehicle manufacturer's specified torque using a torque wrench. - Cause: Damaged or Reused Washer
Solution: A used or damaged washer cannot create an effective seal. Always use a new crush washer with each oil change. - Cause: Cross-threaded Plug
Solution: If the plug was not threaded in straight, it could have damaged the threads on the plug or the oil pan. If the plug threads are damaged, replace the plug. If the oil pan threads are damaged, professional repair or replacement of the oil pan may be necessary.
Difficulty Removing or Installing Plug
- Cause: Over-tightening
Solution: An over-tightened plug can be very difficult to remove and may damage the threads. Use appropriate tools and leverage, but avoid excessive force that could strip the head. - Cause: Cross-threading
Solution: If the plug is cross-threaded, it will bind and be difficult to turn. Do not force it. Attempt to unthread it carefully and inspect for damage.
User Tips
- Always Use a New Washer: This is the most critical tip for preventing leaks. A new crush washer ensures a perfect seal every time.
- Use a Torque Wrench: Investing in a torque wrench and using the manufacturer's specified torque value will prevent both leaks from under-tightening and thread damage from over-tightening.
- Engine Temperature: While draining oil, it's best for the engine to be warm (not hot) to allow oil to flow easily, but cool enough to handle safely.
- Proper Disposal: Always dispose of used engine oil and old automotive parts at certified recycling centers or facilities.
Manufacturer & Compliance Information
Manufacturer Details
Manufacturer: SUCCESS COURIER SL
EU Authorized Representative: CALLE RIO TORMES NUM. 1, PLANTA 1,DERECHA, OFICINA 3, Fuenlabrada.Madrid, 28947
Importer: No. 1686-1688, 1702-1716 jinyongfu auto parts supplies city, no. 1686-16816, guangyuan east road, yuexiu district, guangzhou city, guangdong province (cannot be used as a factory)
Compliance Information
This product complies with relevant industry standards for automotive components. For specific compliance documentation or certifications, please refer to the additional resources section or contact the manufacturer directly.
Additional Resources
A detailed user manual in PDF format is available for download. This document provides further information and specific instructions that may not be covered in this summary. You can access the PDF manual here.