HYULIGHTS HYU-150B

Contents

HYULIGHTS HYU-150B Aluminum LED Par Light User Manual

Model: HYU-150B

HYULIGHTS HYU-150B LED Par Light, front view with warm light

Front view of the HYULIGHTS HYU-150B LED Par Light, displaying warm light output.

1. Introduction

Thank you for choosing the HYULIGHTS HYU-150B professional LED Par light. This device is a powerful and versatile stage lighting solution designed for various applications including stages, churches, night clubs, entertainment halls, discos, hotels, and shops.

This manual provides essential information for the safe and effective installation, operation, and maintenance of your LED Par Light. Please read it carefully before using the device.

Product demonstration video showcasing various light effects and DMX features.

2. Safety Instructions

For your safety, please read this user manual carefully before installing or operating the device. Installation and operation should be carried out by certified technicians, and all instructions must be followed strictly.

CAUTION:

  • It is forbidden to use this device in thunderstorm weather.
  • Prohibit the blisters!
  • Work temperature range: -20°C to 45°C.
  • Unplug the mains lead before opening the housing for any reason.

Every person involved with the installation, operation, and maintenance of this device must be qualified and follow the instructions in this manual carefully.

3. Package Contents

Upon unpacking the device, please check carefully for any shipping damage. If damage is found, do not install the device and contact customer support immediately. Inside the carton box, you should find:

  • 1 x Power Cable
  • 1 x User Manual (this document)
  • 1 x LED Par Light unit
  • 2 x Bow Brackets
  • 2 x Screws

4. Mounting and Installation

For added protection, install fixtures outside walkways, seating areas, or areas where unauthorized persons may come into contact with fixtures.

  • Before mounting the luminaire to any surface, ensure that the mounting area can withstand a minimum point load of 10 times the weight of the unit.
  • Clamp installations must always be secured using secondary safety accessories such as appropriate safety cables.
  • Never stand directly beneath the unit when installing, removing, or servicing the light fixture from the ceiling or when setting it up on a flat, level surface.
  • Make sure the fixture is at least 0.5m (1.5ft) away from any flammable objects (decorations, etc.).
  • Overhead installation requires extensive experience, including calculation of working load limits, in-depth knowledge of the installation materials used, and regular safety inspections of all installation materials and fixtures. If you lack these qualifications, do not attempt to install it yourself, as improper installation may result in personal injury.
  • Be sure to complete all fitting and installation procedures before connecting the mains power cord to a suitable wall outlet.
Product dimensions and multiple views of the LED Par Light

Product dimensions: 27cm (Height) x 28.5cm (Width) x 12cm (Depth). Includes side, front, and back panel views.

5. DMX-512 Control Connection

To connect the LED Par Light to a DMX controller:

  1. Connect the supplied XLR cable to the 3-pin XLR female output of the controller.
  2. Connect the other end of the cable to the 3-pin XLR male input of the moving head.
  3. You can chain multiple moving heads together via a serial link.
  4. The required cable should be a two-conductor shielded cable with XLR input and output connectors.
DMX 3-pin XLR wiring diagram

DMX 3-pin XLR wiring diagram showing pin assignments: Pin 1 (Ground), Pin 2 (Data -), Pin 3 (Data +).

Back panel diagram of the LED Par Light

Detailed back panel diagram showing 18 LEDs, 4-digit display, DMX IN/OUT ports, vents, and dual bracket attachment points.

6. Technical Specifications

ParameterValue
Input VoltageAC90-240V / 50-60Hz
Power200W
LED Quantity24PCS RGBWA UV 6in1 High Power LEDs or 24PCS RGBW 4in1 High Power LEDs
Wash Angle40 degrees
MaterialAluminum
ColorBlack
Color Mixing16.7 million kinds of color change (RGBWA UV 6in1)
Strobe1-30 Flashes per second (Full electronic dimming & Strobe)
Control ModesAuto, Sound, DMX, Master/Slave
DMX Channels6/10 channels (RGBWA UV 6in1) or 4/8 channels (RGBW 4in1)
StructureCast aluminum chassis, honeycomb design, high quality cooling system
Power CablePower in/out, DMX in/out
Waterproof TypeIndoor using
Net Weight (NW)1.85 KG
Gross Weight (GW)2.8 KG
Product Size28.5 x 27 x 12.5 cm
Packing Size25.5 x 25 x 14 cm
Is Bulbs IncludedYes
Power SourceAC
Luminous Flux2000-82000
Installation MethodSelf-contained
CertificationsCE, FCC, RoHS, WEEE
OccasionProfessional Stage & DJ

7. Operating Instructions

7.1. Menu Function (LCD Digital Display Key Functions)

The device features an advanced LED display with a 4-button control panel for easy navigation and setting adjustments.

Key-pressDescription
MENUAccess DMX control, color selection, color transformation, color transition, color flash, sound control, or color brightness settings.
UPIncrease values.
DOWNDecrease values.
ENTERConfirm selection. All setting values will be saved after pressing this button.

7.2. Digital Show Function Form

NoShowFunctionValueInstruction
1d001DMX address001~5126CH mode, UP/DOWN increase or reduce the value.
2A001DMX address10CH mode, UP/DOWN increase or reduce the value.
3r255Red dim000~255UP/DOWN Change brightness.
4G255Green dim000~255UP/DOWN Change brightness.
5b255Blue dim000~255UP/DOWN Change brightness.
6u255White dim000~255UP/DOWN Change brightness.
7y255Amber dim000~255UP/DOWN Change brightness.
8P255Ultraviolet dim000~255UP/DOWN Change brightness.
9FH99Strobe01~99UP/DOWN change the speed.
10CL01Colors choose01~08UP/DOWN Change color.
11CC99Colors Jump01~99UP/DOWN change the speed.
12DE99Colors Gradate01~99UP/DOWN change the speed.
13CP99Colors Pulse01~99UP/DOWN change the speed.
14SU01Colors sound-Active01-09UP/DOWN Change the effects.

7.3. DMX Channels

The LED Par Light supports both 6-channel and 10-channel DMX modes.

6 Channels Mode

ChannelFunctionInstruction
CH1R DimmerRed Dimmer - Dark to Bright
CH2G DimmerGreen Dimmer - Dark to Bright
CH3B DimmerBlue Dimmer - Dark to Bright
CH4W DimmerWhite Dimmer - Dark to Bright
CH5A DimmerAmber Dimmer - Dark to Bright
CH6U DimmerUltraviolet Dimmer - Dark to Bright

10 Channels Mode

ChannelFunctionInstruction
CH1Total DimmerRGBW Total Dimmer - Dark to Bright
CH2R DimmerRed Dimmer - Dark to Bright
CH3G DimmerGreen Dimmer - Dark to Bright
CH4B DimmerBlue Dimmer - Dark to Bright
CH5W DimmerWhite Dimmer - Dark to Bright
CH6A DimmerAmber Dimmer - Dark to Bright
CH7U DimmerUltraviolet Dimmer - Dark to Bright
CH8Total StrobeRGBW Total Flash Strobe - Slow to Fast
CH9Function Choice000~050: CH1-CH8 Control.
051~100: Different Colors output.
101~150: Colors Jump Change.
151~200: Colors Gradate.
201~250: Colors Pulse Change.
251-255: Sound-Active.
CH10Function/SpeedSlow to Fast (At the Colors output and sound choose the color).

This product can achieve the best effect when paired with a fog machine!

8. User Tips

  • For optimal visual impact, consider using multiple units to create a wider wash effect across your stage or venue.
  • Experiment with different DMX channel modes (6-channel vs. 10-channel) to find the best balance of control and simplicity for your specific setup.
  • Utilize the built-in automated programs and sound-active modes for quick and dynamic lighting displays without extensive DMX programming.
  • Always ensure proper ventilation around the unit to maintain optimal operating temperature and prolong LED lifespan.

9. Troubleshooting

If you encounter issues with your LED Par Light, please refer to the following common troubleshooting steps:

  • No Power: Check the power cable connection to both the unit and the power outlet. Ensure the outlet is functional.
  • No Light Output: Verify that the dimmer settings are not at 0% and that the unit is not in a blackout mode. Check DMX connections if using DMX control.
  • Incorrect Color/Effect: Ensure the correct DMX channel mode is selected and that DMX addresses are set properly. If using internal programs, cycle through them to confirm functionality.
  • DMX Control Issues: Check all DMX cable connections. Ensure the DMX controller is sending a signal and that the unit's DMX address matches the controller's output. Try a different DMX cable.
  • Overheating: Ensure the unit has adequate ventilation and that the ambient temperature is within the specified operating range (-20°C to 45°C). Clear any obstructions from the cooling vents.

If problems persist after attempting these steps, please contact customer support.

10. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your LED Par Light:

  • Cleaning: Periodically clean the exterior of the unit, especially the lens, with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
  • Ventilation: Keep the cooling vents clear of dust and debris to prevent overheating. Use compressed air to gently clear dust from internal components if necessary, ensuring the unit is unplugged.
  • Cable Inspection: Regularly inspect power and DMX cables for any signs of wear, cuts, or damage. Replace damaged cables immediately to prevent electrical hazards.
  • Storage: When not in use for extended periods, store the unit in its original packaging or a protective case in a dry, dust-free environment.

11. Warranty and Support

For detailed warranty information and customer support, please refer to the official documentation provided with your purchase. You can also find a digital version of the user manual (PDF) for this product at: HYULIGHTS HYU-150B User Manual (PDF).

For any technical assistance or service inquiries, please contact HYULIGHTS customer service.

12. Frequently Asked Questions (FAQ)

Q: Can this light be used outdoors?
A: No, this product is specified for indoor use only.
Q: What is the difference between 6in1 and 4in1 LEDs?
A: 6in1 LEDs (RGBWA UV) include Red, Green, Blue, White, Amber, and Ultraviolet colors, offering a wider color spectrum and UV effects. 4in1 LEDs (RGBW) typically include Red, Green, Blue, and White.
Q: How do I reset the DMX address?
A: Use the 'MENU' button to navigate to the DMX address setting (d001 or A001), then use 'UP'/'DOWN' to adjust the value and 'ENTER' to save.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.