1. Introduction
The COOSPO BK9 is a versatile sensor designed to track either your cycling speed or cadence, providing essential data for your training and rides. It supports both Bluetooth 5.0 and ANT+ protocols, ensuring wide compatibility with various cycling applications and GPS bike computers. This manual provides instructions for the proper installation, operation, and maintenance of your BK9 sensor.

Image: COOSPO BK9 Speed and Cadence Sensors (both units)
2. Package Contents
Please check the package for the following items:
- COOSPO BK9 Sensor (Main Unit)
- User Manual
- Silicone Pad (for Cadence Sensor mounting)
- Silicone Straps (for mounting)

Image: Cadence sensor, box, and mounting accessories (rubber pad, rubber bands)
3. Setup
3.1 Battery Installation
The sensor comes with a pre-installed battery. Before first use, you must remove the transparent insulation sheet from the battery compartment to activate the sensor.
- Locate the battery compartment on the sensor.
- Carefully remove the transparent insulation sheet.
- Ensure the battery (CR2032, 3V) is correctly seated with the positive (+) side facing up.
- Close the battery compartment securely.

Image: Exploded view of the sensor showing battery compartment and insulation sheet removal
3.2 Mounting the Sensor
The BK9 sensor can function as either a cadence sensor (BK9C) or a speed sensor (BK9S) depending on its mounting location. The sensor automatically detects its mode based on orientation and motion.
3.2.1 Cadence Sensor (BK9C) Mounting
- Install the silicone pad on the back of the sensor.
- Select a silicone strap suitable for your bicycle's crank arm thickness.
- Mount the sensor on the inner side of the left crank arm.
- Rotate the crank arm to ensure the sensor and silicone strap do not rub against any other part of the bicycle or your shoes during operation.
- A blue light will flash to indicate the device is enabled.

Image: Cadence sensor mounted on a bicycle crank arm for real-time cadence measurement
3.2.2 Speed Sensor (BK9S) Mounting
- Install the silicone pad on the back of the sensor.
- Select a silicone strap suitable for your bicycle's wheel hub.
- Mount the sensor on the hub of either the front or rear wheel.
- Ensure the sensor is securely installed and does not interfere with any moving parts of the wheel or bicycle.
- A blue light will flash to indicate the device is enabled.

Image: Speed sensor mounted on a bicycle wheel hub for real-time speed measurement
Important:
- Ensure the sensor is securely installed to prevent damage or loss during riding.
- The sensor will enter sleep mode after a period of inactivity. Rotate the wheel or crank to wake it up before pairing.
4. Operating Instructions
4.1 Connecting to Cycling Applications (Bluetooth)
- Turn on Bluetooth and location services on your smartphone.
- Important: Do NOT pair the sensor directly in your phone's Bluetooth settings.
- Open your preferred cycling application (e.g., CoospoRide, Rouvy, Zwift, Peloton, Wahoo).
- Navigate to the 'Sensor Settings' or 'Add Device' menu within the application.
- The application will scan for available sensors. Select the BK9 sensor's Bluetooth ID (e.g., "BK9C 12345") to connect.

Image: Phone screen showing compatibility with fitness apps like CoospoRide, Rouvy, Peloton, Wahoo, Zwift
4.2 Connecting to Smart Devices / GPS Bike Computers (Bluetooth and ANT+)
- Turn on your smart device or GPS bike computer.
- Navigate to the 'Sensor Settings' or 'Add Sensor' menu.
- The device will scan for available sensors.
- Find the BK9 sensor's Bluetooth or ANT+ ID and select it to connect.

Image: Bicycle computer displays showing compatibility with GPS bike computers
4.3 Sensor Status Indicators
| Sensor Status | Indicator Light |
|---|---|
| Installed Battery | Red and blue flashing alternately |
| Wake up | Blue light flashing |
| Low Battery Alert | Red light flashing |
5. Maintenance
5.1 Battery Replacement
When the sensor indicates a low battery (red light flashing), it's time to replace the CR2032 3V battery.
- Open the battery compartment cover.
- Remove the old battery.
- Insert a new CR2032 3V battery with the positive (+) side facing up.
- Close the battery compartment cover securely.
5.2 Cleaning
The BK9 sensor is IP67 waterproof, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. You can clean the sensor with a damp cloth. Avoid using harsh chemicals or high-pressure cleaning methods.

Image: COOSPO sensor submerged in water, illustrating IP67 waterproof rating
5.3 Storage
If the device will not be used for an extended period, remove the battery to prevent leakage and damage to the sensor. Store the sensor in a cool, dry place.
6. Troubleshooting
- Sensor not waking up: If the sensor has been inactive, rotate the wheel (for speed) or crank (for cadence) for a few seconds to wake it from sleep mode.
- Pairing issues: Ensure Bluetooth and location services are enabled on your phone/device. Remember to pair through the cycling application or bike computer's sensor settings, not directly via your phone's Bluetooth settings.
- Low battery: A red flashing light indicates a low battery. Replace the CR2032 battery.
- Interference: Some users have reported interference with electrical networks causing the sensor to stop functioning. Try to avoid areas with strong electromagnetic interference.
- Product not operating normally: If the product is not operating as expected, please contact COOSPO support for assistance. Do not attempt to disassemble or repair the product yourself.
7. Specifications
| Feature | Detail |
|---|---|
| Model | BK9C / BK9S |
| Battery Type | CR2032, 3V |
| Battery Life | Approximately 300 hours |
| Wireless Transmission | Bluetooth 5.0; ANT+ |
| Waterproof Rating | IP67 |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS, WEEE |
Note: Actual battery life may vary depending on usage environment and conditions.
8. User Tips
- Wide Compatibility: The BK9 sensor is highly compatible with popular cycling platforms and devices, including Garmin, Wahoo, Zwift, Peloton, and Rouvy. Many users confirm quick and stable pairing.
- Indoor Cycling: The sensor works reliably on indoor spinning bikes or elliptical trainers, providing accurate data for your indoor workouts.
- Single Function: Note that each BK9 sensor unit functions as either a speed sensor OR a cadence sensor, not both simultaneously. If you need both, you will require two separate BK9 units.
- Battery Activation: Always remember to remove the plastic insulation tab from the battery compartment before first use to activate the sensor.
9. Safety and Disposal Information
9.1 General Safety Precautions
- Do not open or modify the product.
- Do not disassemble or attempt to repair this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is not operating normally, please contact COOSPO support.
- The product must be returned to the manufacturer for any service or repair.
9.2 Battery Safety
- Remove and immediately recycle or dispose of used batteries according to local regulations, and keep them out of reach of children. Do not dispose of batteries in household waste or incinerate them.
- Even used batteries can cause serious injury or death.
- Call your local poison control center for treatment information.
- Do not force discharge, charge, disassemble, heat above 45°C, or incinerate. Otherwise, it may cause chemical burns due to venting, leakage, or explosion, resulting in injury.
- Ensure batteries are installed correctly according to polarity (+ and -).
- Do not mix old and new batteries, or batteries of different brands or types, such as alkaline, carbon-zinc, or rechargeable batteries.
- According to local regulations, remove batteries from devices not used for a long time and immediately recycle or dispose of them.
- Always close the battery compartment completely. If the battery compartment cannot be closed securely, stop using the product, remove the battery, and keep it out of reach of children.
9.3 Product Disposal
Waste electrical products should not be disposed of with household waste. Please recycle in facilities where available. Contact your local government or retailer for more information on proper disposal and recycling.
10. Disclaimer
The information contained in this manual is for reference only. The products described above may change due to continuous research and development plans by the manufacturer, without prior notice. COOSPO makes no statements or guarantees regarding this manual.
For a detailed PDF version of this manual, please refer to the official document available at COOSPO BK9 User Manual (PDF).