VAKIND Car Fake Security Light

Contents

VAKIND Car Fake Security Light User Manual

Model: Car Fake Security Light

Brand: VAKIND

1. Introduction

The VAKIND Car Fake Security Light is a solar-powered simulated dummy alarm designed to deter potential thieves by mimicking the presence of a real car alarm system. Featuring a bright LED flashing light, it provides a visual warning without the need for complex wiring. Its intelligent induction system ensures automatic operation based on ambient light conditions, offering a convenient and energy-efficient solution for vehicle security.

Car Fake Security Light (blue) on dashboard with car in background
The VAKIND Car Fake Security Light in action, simulating an active alarm.

2. Safety Information

WARNINGS:

  • Read all instructions carefully before using this product. Keep this manual for future reference.
  • Do not use the product for any purpose other than its intended use. Misuse may cause injury, damage to the product, or other hazards.
  • Keep this product out of the reach of children under 3 years, unless under direct adult supervision. Small parts may cause choking hazard.
  • Do not disassemble, modify, or repair the product by yourself. Improper operation may cause electric shock, fire, or product failure. Contact professional maintenance personnel if needed.
  • Dispose of the product and its packaging in accordance with EU WEEE (Waste Electrical and Electronic Equipment) Directive 2012/19/EU and RoHS Directive 2011/65/EU. Do not discard as household waste.
  • Do not use the product near water or in humid environments. Avoid contact with liquids to prevent electric shock.
  • Unplug the power supply when not in use or during cleaning.

ATTENTION:

  • Not suitable for children under 36 months. Contains small parts that may cause choking hazard. Use under adult supervision.
  • Protective equipment should be worn. Not to be used in traffic. This product requires high skills to avoid falls or collisions. (Note: This warning seems generic and may not apply directly to this product, but is included as per source material.)
  • Only to be used in water in which the child is within its depth and under adult supervision. (Note: This warning seems generic and may not apply directly to this product, but is included as per source material.)
  • Contains substances that may cause irritation if misused. Follow the instructions strictly.

3. Product Features

  • Solar-Powered Theft Deterrent: Efficiently absorbs and stores solar energy with a high-efficiency solar panel and built-in large-capacity Ni-MH battery for long-lasting performance.
  • Convenient Charging Options: Can be charged via solar power or a Micro USB interface (USB 5V) if sunlight is insufficient.
  • Automatic On/Off: Equipped with a built-in light sensor, it flashes automatically at night and remains off during the day.
  • Easy Installation: Simple adhesive glue installation, no complicated wiring or additional tools required.
  • High-Brightness LED: Imported high-brightness LED chip provides excellent illumination for a clear warning signal.
  • Compact and Lightweight: Small size and light design make it suitable for various vehicle interiors.
Red and blue versions of the Car Fake Security Light
Available in red and blue flashing light options.

4. Package Contents

Upon opening the package, verify that the product is complete and undamaged. The package should contain:

  • 1 x VAKIND Car Fake Security Light
  • Adhesive tape (pre-applied or included)
  • User Manual (this document, also available as PDF: View PDF)

5. Installation

  1. Unpacking Inspection: After opening the package, verify that the product is complete and undamaged.
  2. Prepare the Device: Locate the ON/OFF switch on the device. Ensure it is in the 'ON' position for operation.
  3. Close-up of the ON/OFF switch on the device
    Ensure the ON/OFF switch is in the 'ON' position.
  4. Choose Installation Location: Select a flat, clean surface on your car's instrument panel, door side, car grille, or bumper. Ensure the location allows the solar panel to receive adequate sunlight for charging.
  5. Apply Adhesive: Peel off the protective film from the double-sided adhesive tape on the back of the device.
  6. Applying double-sided adhesive tape for installation
    Peel off the protective film from the adhesive tape.
  7. Attach the Device: Firmly press the device onto the chosen surface. Hold for a few seconds to ensure a secure bond.
Three-step visual guide for installation using adhesive
Visual guide for the simple adhesive installation process.

The device is designed for universal application and can be easily installed in various locations within your vehicle.

6. Operation

  1. Power On: Ensure the ON/OFF switch is in the 'ON' position.
  2. Automatic Flashing: The device features a built-in light sensor. It will automatically begin flashing when the ambient light is dark (e.g., at night or in a dark garage) and stop flashing during the day when there is sufficient light.
  3. Diagram illustrating built-in light sensor: blinks at night, not during the day
    The light sensor detects ambient light to control flashing.
  4. Daytime Flashing (Optional): To make the light flash during the day, cover the solar panel or the light sensor with dark paper or tape. This will trick the sensor into thinking it is dark, activating the flashing function.
  5. Flashing Interval: The LED light flashes approximately every 5 seconds.
Blue light flashing automatically when car is parked
The device automatically blinks when parked, simulating an alarm.
Blue light flashing inside a car at night
The blue LED light flashing inside the vehicle at night.
Red light flashing on car windshield from outside
The red LED light flashing, visible from outside the car.

7. Charging

The Car Fake Security Light is primarily powered by its integrated solar panel. For optimal performance, ensure the device is placed in a location where the solar panel can receive direct sunlight during the day.

Device with solar panel facing upwards, indicating solar charging
The solar panel charges the internal battery during daylight hours.

In situations with limited sunlight, the device can also be charged via its Micro USB interface using a standard USB 5V power source (e.g., car charger, power bank, or computer USB port).

Product demonstration video showing the flashing light and USB charging port.

The device contains a 100 mA built-in Ni-MH battery. While the exact charging time to full capacity can vary based on light intensity and USB power source, continuous exposure to sunlight or a few hours of USB charging should suffice for normal operation.

8. Maintenance

  • Cleaning: Wipe off surface dust or stains promptly after use with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: When not in use for extended periods, store the product in a dry, well-ventilated location away from direct sunlight and extreme temperatures.
  • Avoid Moisture: Do not expose the product to rain or high-humidity environments.

9. Troubleshooting

  • Light not flashing at night:
    • Ensure the ON/OFF switch is in the 'ON' position.
    • Verify the solar panel has received sufficient sunlight for charging during the day. If not, charge via USB.
    • Check if the light sensor is obstructed.
  • Light flashing during the day:
    • The light sensor might be covered or in a dark area. Ensure it has access to ambient light.
  • Device not charging:
    • For solar charging, ensure the solar panel is clean and exposed to direct sunlight.
    • For USB charging, ensure the Micro USB cable and power source are functional and properly connected.

10. Specifications

Attribute Value
Model Number Car Fake Security Light
Brand Name VAKIND
Origin Mainland China
Certification NONE
Type Anti-Theft Device One-Way
Material ABS+LED
Colour Black casing, Red/Blue flashing light (optional)
Power Supply Solar or USB 5V (100 mA built-in Ni-MH battery)
Working Voltage 0.05V
Working Current 0.02A
Power 0.01W
Flashing Interval 5 seconds/time
Function Warning anti-theft (simulated)
Installation Position Universal for all cars (instrument panel, door side, grille, bumper)
Product Size 50 x 25 x 15 mm (1.97 x 0.98 x 0.59 inches)
Product Weight 15g
Package Length 19 cm
Package Width 8 cm
Package Height 4 cm
Package Weight 0.024 kg
Dimensions of the device (50mm x 25mm)
Product dimensions.

11. User Tips

  • Handle with Care: While designed for durability, avoid excessive force or frequent repositioning after initial installation to maintain the integrity of the adhesive and internal components.
  • Optimal Placement: For best solar charging, place the device where it receives maximum direct sunlight during the day. The dashboard near the windshield is often ideal.
  • Charging Time: The internal battery charges via solar power or USB. The exact time to full charge depends on light conditions or USB power source. Ensure regular charging for consistent night-time flashing.

12. Warranty and Support

For any issues or inquiries regarding your VAKIND Car Fake Security Light, please refer to the official product page or contact the seller directly for support.

This user manual is also available in PDF format for your convenience: Download User Manual (PDF).

© 2024 VAKIND. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.