haozee Smart Temperature and Humidity Sensor

Contents

Haozee Smart WiFi/Zigbee Temperature and Humidity Sensor

Model: Smart Temperature and Humidity Sensor

Your guide to a smarter, more comfortable home environment.

1. Introduction

The Haozee Smart WiFi/Zigbee Temperature and Humidity Sensor is designed to monitor your indoor environment with high accuracy. It provides real-time temperature and humidity readings on its LCD display and can integrate with smart home systems like Home Assistant via WiFi or Zigbee protocols. This sensor enables smart automation, phone notifications, and helps maintain optimal environmental conditions in your home.

Two Haozee Smart Temperature and Humidity Sensors
Figure 1: Haozee Smart Temperature and Humidity Sensors

2. Safety Information

  • Keep the device away from water and high humidity environments.
  • Do not expose the device to direct sunlight or extreme temperatures.
  • Use only specified battery types (AAA) and ensure correct polarity during installation.
  • Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
  • Keep out of reach of children and pets.

3. Package Contents

Please check the package for the following items:

  • Haozee Smart Temperature and Humidity Sensor
  • User Manual (this document)
  • Adhesive mounting tape (may be pre-attached or included separately)

Note: AAA batteries are not included and must be purchased separately.

4. Product Overview

The sensor features a clear LCD display showing current temperature and humidity. It is designed for low power consumption, offering extended battery life.

Haozee sensor displaying 74.8°F and 63% humidity with feature list
Figure 2: Sensor display and key features

Key Features:

  • Real-time Monitoring: Instant display of temperature and humidity.
  • Smart Automation: Integrate with smart home routines (e.g., turn on A/C or humidifier).
  • Phone Notifications: Receive alerts for environmental changes.
  • Low Power Consumption: Long battery life, typically over 500 days with AAA batteries.
  • Customizable Button: For specific functions within your smart home app.
  • Connectivity: Supports both WiFi and Zigbee protocols for versatile integration.
Haozee sensor with Tuya and WiFi logos
Figure 3: Tuya and WiFi compatibility

5. Setup

5.1 Battery Installation

  1. Gently slide down the rear cover of the device to open the battery compartment.
  2. Insert two AAA batteries, ensuring correct polarity (+/-).
  3. Close the rear cover securely.
Sensor displaying 70.4°F and 42% humidity, highlighting super low power consumption and >500 days battery life with AAA batteries.
Figure 4: Battery life and AAA battery requirement

5.2 App Installation

The sensor is compatible with common smart home platforms. For optimal functionality, it is recommended to use the Tuya Smart or Smart Life app.

  1. Download the 'Tuya Smart' or 'Smart Life' app from your mobile application store (App Store for iOS or Google Play Store for Android).
  2. Register or log in to your account.

5.3 Device Pairing

To pair your sensor with the app:

  1. Ensure your smartphone is connected to a 2.4GHz Wi-Fi network (if using WiFi version) or your Zigbee hub is powered on and connected (if using Zigbee version).
  2. Open the Tuya Smart/Smart Life app.
  3. Tap the '+' icon in the upper right corner to add a device.
  4. Select 'Sensor' or 'Temperature and Humidity Sensor' from the device list.
  5. Follow the on-screen instructions to put the sensor into pairing mode (usually involves pressing and holding a reset/pairing button on the device until an indicator light flashes).
  6. Confirm the indicator light is flashing in the app and proceed with pairing.
  7. Once successfully added, you can rename the device and assign it to a room.

Note: Zigbee products typically require a Zigbee hub and may not work directly with a Tuya Zigbee hub if not explicitly stated as compatible.

5.4 Placement Guidelines

For accurate readings and effective automation, consider the following:

  • Place the sensor in a central location within the room, away from direct sunlight, air conditioning vents, heaters, refrigerators, or ovens, as these can affect readings.
  • Ensure the sensor is not obstructed by furniture or curtains.
  • Ideal for monitoring specific areas like baby rooms to maintain comfortable conditions.
Sensor in a baby's room, illustrating 'Baby care mode'
Figure 5: Sensor placement for baby care mode

6. Operating Instructions

6.1 Reading the Display

The LCD display shows the current temperature (in °C or °F) and relative humidity (as a percentage). A battery icon indicates the remaining battery level.

6.2 Changing Temperature Units (°C/°F)

To switch between Celsius and Fahrenheit, access the device settings within the Tuya Smart or Smart Life app. Look for an option related to 'Temperature Unit' or 'Unit Settings' for the sensor.

6.3 Smart Automation

Leverage the sensor's data to create intelligent automation routines in your smart home app:

  • Temperature Control: Set a rule to automatically turn on your smart air conditioner when the temperature exceeds a certain threshold.
Sensor displaying 74.8°F and 63% humidity, demonstrating 'Automatically turn on A/C when temperature goes high.'
Figure 6: Automation for high temperature
  • Humidity Control: Configure a rule to automatically activate your smart humidifier when the humidity level drops below a desired percentage.
Sensor displaying 77.4°F and 30% humidity, demonstrating 'Automatically turn on humidifier when humidity level is low.'
Figure 7: Automation for low humidity
  • Phone Notifications: Set up alerts to be notified on your phone if temperature or humidity levels go outside your preferred range.

7. Maintenance

7.1 Battery Replacement

When the battery indicator on the display or in the app shows low power, replace the AAA batteries promptly to ensure continuous operation. Follow the battery installation steps in Section 5.1.

7.2 Cleaning

Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the device or affect sensor accuracy.

8. Troubleshooting

  • Device not pairing:
    • Ensure the device is in pairing mode (indicator light flashing).
    • Check that your Wi-Fi network is 2.4GHz (5GHz is not supported).
    • Verify your Zigbee hub is properly set up and within range (for Zigbee version).
    • Restart the sensor by removing and reinserting batteries, then try pairing again.
    • Ensure your phone is close to the sensor and router during pairing.
  • Inaccurate readings:
    • Relocate the sensor away from direct sunlight, heat sources, or air vents.
    • Ensure there are no obstructions covering the sensor.
  • No data in app:
    • Check battery level.
    • Verify Wi-Fi or Zigbee connection status.
    • Ensure the sensor is within range of your Wi-Fi router or Zigbee hub.

9. Specifications

Feature Specification
Brand Name haozee
Power Source Battery (AAA)
Battery Included No
Wireless Communication Yes
Communication Method WiFi (2.4GHz) / Zigbee
Working Voltage DC 3V
Battery Type AAA
Estimated Battery Life Over 500 days
Dimensions (approx.) 51 x 51 x 25 mm
Weight (approx.) 18g
Origin Mainland China

10. User Tips

  • This sensor works well with Home Assistant and other smart home networks that support Tuya or Zigbee protocols.
  • Ensure proper pairing to your home smart network for reliable performance.
  • For Zigbee versions, confirm compatibility with your specific Zigbee hub, as some Zigbee products may not work with all Tuya Zigbee hubs.
  • Regularly check battery health to prevent issues like battery leakage or compartment damage. Use high-quality AAA batteries.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or refer to the product listing on the platform where you made your purchase. Keep your proof of purchase for warranty claims.

12. Additional Resources

A PDF user manual is available for download. Please note that the content of this PDF (User manual (PDF)) appears to be for a Linkoze Motion Sensor (model LKMSW002) and not specifically for the Haozee Temperature and Humidity Sensor. Refer to the instructions provided in this HTML manual for your temperature and humidity sensor.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.