SIMICAM HD IP Bullet Security Camera

Contents

SIMICAM HD IP Bullet Security Camera User Manual

Model: HD IP Bullet Security Camera

1. Introduction

This manual provides detailed instructions for the installation, configuration, and operation of your SIMICAM HD IP Bullet Security Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

The SIMICAM HD IP Camera is designed for video surveillance, offering various resolutions including 4MP, 5MP, and 4K, with options for Power over Ethernet (PoE 48V) or DC 12V power supply. It features infrared night vision, motion detection, and is compatible with ONVIF standards for integration with third-party NVRs and video surveillance systems.

For technical support, please contact: 453836824@qq.com

2. Product Features

  • High Definition: Available in 4MP, 5MP, and 4K (8MP) resolutions.
  • Connectivity: IP/Network Wired, with optional PoE (48V) or DC 12V power.
  • Night Vision: Infrared night vision with EXIR LEDs, approximately 10-30 meters IR distance.
  • Audio: Built-in microphone for one-way audio recording.
  • Weatherproof: IP66 rated, suitable for outdoor use in temperatures from -40°C to 50°C.
  • Motion Detection: AI functions include motion detection.
  • Video Compression: H.265 for efficient storage.
  • Compatibility: ONVIF 2.0-2.4 compatible with NVRs from Dahua, HIKVISION, SIMICAM, etc.
  • Mobile Access: P2P monitoring via Watilon app (Android/iOS).
  • Installation: Versatile installation options including Ceiling, Normal, Wall Mounted, Pendant Mount.
SIMICAM Bullet Camera with Audio, Onvif, PoE, 4K UltraHD
SIMICAM Bullet Camera with Audio, Onvif, PoE, and 4K UltraHD capabilities.
Audio Camera with built-in microphone
The camera features a built-in microphone for authentic sound recording, compatible with NVRs for sound video recording.
Bullet camera demonstrating waterproof capabilities
The bullet camera is waterproof and weatherproof, designed to operate in extreme temperatures from -40°C to 50°C.
Comparison of Super Night Vision with EXIR LEDs
Super Night Vision with EXIR LEDs provides enhanced night vision up to 100ft/30m compared to standard night vision.

3. Setup and Installation

This section outlines the steps to connect your SIMICAM IP camera to your surveillance system.

3.1. Working with PoE NVR

For Power over Ethernet (PoE) setups, the camera can be powered directly by a PoE NVR or PoE Switch via an Ethernet cable. This simplifies wiring as a separate power adapter is not needed for the camera.

PoE Camera NVR wiring diagram
Wiring diagram for connecting the PoE camera to an NVR system. The camera connects to the PoE port on the NVR, which then connects to a network router. Monitors can be connected via VGA or HDMI.
  1. Connect the PoE camera to a PoE port on your NVR using an Ethernet cable.
  2. Connect your NVR to a network router.
  3. Connect a monitor to your NVR via VGA or HDMI for local viewing.
  4. Ensure the NVR is powered on.

3.2. Working with PoE Switch

If your NVR does not have PoE ports, you can use a PoE switch or PoE injector to power the camera.

  1. Connect the PoE camera to a PoE port on a PoE Switch or PoE Injector using an Ethernet cable.
  2. Connect the PoE Switch/Injector to your network router.
  3. Connect your NVR to the same network router.
  4. Ensure all devices are powered on.

3.3. Working as a Standard IP Camera (DC 12V)

The camera can also function as a standard IP camera using a DC 12V power adapter.

  1. Connect the camera to a DC 12V power adapter.
  2. Connect the camera to your network router using an Ethernet cable.
  3. Ensure the camera and router are powered on.

Important Notes for Setup:

  • The IP Camera requires a 12V Power adapter and Ethernet connection with a router if not using PoE.
  • PoE cameras can be powered by a PoE NVR or PoE Switch over Ethernet.
  • PoE cameras can also operate as standard IP cameras when connected with a 12V power adapter and Ethernet to a router.

4. Configuration and Operation

4.1. Modifying Camera IP Address

By default, the camera is set to DHCP with Username: admin and Password: 123456. It is recommended to use the IPCBach Tool for IP address modification.

IPCBatch Tool Download: https://www.vatilon.com/xflrjxz

VMS Download: https://download.xm030.cn/d/MDAwMDE2MTI=

  1. Use the IPCBach Tool to search for the camera's IP.
  2. Set a fixed IP address for the camera. Ensure it does not conflict with other devices on your LAN. The camera's IP network segment must be consistent with the NVR, computer, and LAN.
  3. If you are not experiencing issues, it is not recommended to change the default password as restoring to factory settings can be difficult.
IPCBach Tool IP address modification interface
Screenshot of the IPCBach Tool interface for modifying the camera's IP address. Ensure the IP segment is consistent with your LAN.

4.2. Browser Access and Camera Settings

For initial setup and advanced configurations, it is recommended to access the camera via a web browser (e.g., Internet Explorer on Windows). You may need to install a browser plug-in for the first visit.

  1. Open your web browser and enter the camera's IP address (e.g., http://192.168.0.100).
  2. Log in using the default username (admin) and password (123456).
  3. Configure settings such as time zone, night vision mode, and motion detection.
Browser access login page for the camera
Login screen for accessing the camera's settings via a web browser. Default username is 'admin' and password is '123456'.

4.3. Night Work Mode Selection

You can select different night work modes based on your surveillance needs. Ensure your camera model supports these modifications.

  • Infrared Light: Black and white video at night.
  • White Light: Full color video at night.
  • Dual Light: Infrared light is on (B&W video) when no one is present; white light turns on (color video) when motion is detected.
IPCBach Tool night work mode selection
Interface for selecting night work mode, including DualLight, InfraredLight, and WhiteLight options.

4.4. Enabling 'Full Netcom' and 'IP Adaptive'

These functions are enabled by default but might be disabled if the camera was connected to a third-party NVR or due to accidental changes. If your NVR cannot find the camera, verify these settings.

IPCBach Tool 'Full Netcom' and 'IP Adaptive' settings
Screenshot showing the 'Full Netcom' and 'IP Adaptive' settings within the IPCBach Tool, which should be enabled for proper camera detection.

4.5. Motion Detection Setup

Configure motion detection settings to receive alerts when activity is detected.

  1. Navigate to the 'Motion Detect' section in the camera's settings.
  2. Define the alarm warning area.
  3. Enable 'Send Email' for alarm notifications (Note: Some camera models may not support email alarms).
  4. Ensure your email's SMTP service is enabled, obtain a third-party login authorization code, and reduce the email's security level to ensure notifications are received.
Motion detection settings interface
Interface for setting up motion detection, including defining the alarm area and configuring email alerts.
Email server settings for alarm notifications
Configuration screen for email server settings to enable alarm notifications.

4.6. Time Zone and Time Settings

Set the correct time zone and time for accurate timestamping of recordings.

Time zone and time settings interface
Interface for setting the time zone and current time for the camera.

4.7. Mobile App Setup (Watilon)

For remote monitoring, download and configure the Watilon app on your smartphone.

  1. Download App: Search for "Watilon" in the Apple App Store (iOS) or scan the QR code below for Android.
  2. Connect to LAN: Ensure your phone is connected to the same local area network (Wi-Fi) as the camera, with mobile data turned off during initial setup.
  3. Register and Add Device: Register a user account in the app, set a password, and then add the camera equipment. The camera's QR code can be found in the camera's version information using IPCBach Tool or browser access.
QR code for Watilon app download and app screenshots
QR code for downloading the Watilon app and screenshots illustrating the device adding process.

Product Demonstration Video:

A video demonstrating the real-time surveillance capabilities of the SIMICAM HD IP Camera.

5. Maintenance

  • Cleaning: Regularly clean the camera lens with a soft, dry cloth to ensure clear image quality. Avoid using harsh chemicals.
  • Firmware Updates: Check the official SIMICAM website or the provided VMS download link (https://download.xm030.cn/d/MDAwMDE2MTI=) for any available firmware updates to improve performance and security.
  • Environmental Protection: Ensure the camera's waterproof seals are intact, especially after installation or maintenance, to maintain its IP66 rating.

6. Troubleshooting

  • Camera Not Found by NVR: Ensure that the 'Full Netcom' and 'IP Adaptive' functions are enabled in the camera settings (via IPCBach Tool or browser). Also, verify that the camera's IP network segment is consistent with your NVR and local network.
  • No Power (PoE): If using PoE, ensure your PoE NVR or PoE Switch is functioning correctly and providing power. Check all Ethernet cable connections.
  • Poor Image Quality: Clean the camera lens. Check the resolution settings in the camera's configuration. Manage expectations for detailed viewing, as some resolutions might be better suited for general monitoring.
  • Watilon App Issues: If the Watilon app is not detecting the camera or you cannot register, try accessing the camera via a web browser using its IP address for initial setup. Ensure your phone is on the same local network as the camera during setup.
  • Password Reset: If you forget your password, restoring to factory settings can be difficult. It is recommended to keep a record of your password.
  • No MicroSD Card Slot: This camera model does not support microSD cards for internal storage. External NVR or cloud storage is required for recording.

7. Specifications

Feature Specification
Brand NameSIMICAM
StyleBullet Camera
High Definition8.0 Megapixels (4K), also available in 4MP, 5MP
Lens (mm)2mm (options: 2.8mm/3.6mm/6mm/8mm)
SensorCMOS
ConnectivityIP/Network Wired
Power Supply (V)48V (PoE) OR DC 12V
IR Distance (m)Approximately 10-30 meters
Video Compression FormatH.265
AudioOne-way audio (built-in microphone)
AI FunctionsMotion Detection
Color Night VisionNo
IP RatingIP66 (Waterproof / Weatherproof)
Shell MaterialPlastic
Dimensions (L x W x D)(mm)12*8*8
Supported Mobile SystemsAndroid, iOS (Watilon app)
CertificationCE

8. User Tips

  • Easy Integration: Many users report quick detection by NVRs, especially when IP settings are correctly configured.
  • PoE Convenience: The PoE functionality works well, simplifying installation by providing power and data over a single cable.
  • Image Quality Expectations: While offering high resolutions, some users note that the image quality is good for the price but may not provide extreme detail, especially for lower MP models. It's ideal for general monitoring.
  • Material: The camera housing is made of plastic. While durable, users should be aware of this material choice.
  • Power Adapter: Note that a power adapter is typically not included with PoE models, as they are designed to be powered via PoE.
  • ONVIF Compatibility: The camera's ONVIF compatibility allows for integration with various NVR brands like Dahua and Hikvision.

9. Warranty and Support

For any product-related inquiries, technical assistance, or support, please contact our technical support team:

Email: 453836824@qq.com

Please refer to the official product page or contact customer service for specific warranty details.

A PDF version of the user manual is available for download: SIMICAM HD IP Camera User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.