1. Introduction
Thank you for choosing the Coolo Tuya Zigbee Door/Window Sensor. This device provides real-time monitoring of your doors and windows, enhancing your home security and automation. It integrates seamlessly with Tuya Smart Life, Amazon Alexa, Google Assistant, and SmartThings via a Zigbee gateway.

Image: Coolo Tuya Zigbee Door/Window Sensor, showing compatibility with Tuya, Smart Life, Amazon Alexa, SmartThings, and Google Assistant.
2. Product Overview
2.1 Components
- Main Body: The larger part of the sensor, containing the electronics, status indicator, and reset button.
- Magnet: The smaller part of the sensor, which triggers the main body when moved away or towards it.
- Status Indicator: A small LED light on the main body that shows the device's status (e.g., pairing mode).
- Reset Button: A small button on the main body used for pairing and resetting the device.
2.2 Dimensions

Image: Dimensions of the Zigbee door sensor. Main body: 1.96in (height) x 0.98in (width). Magnet: 1.18in (height) x 0.59in (width).
3. Safety Precautions
- Do not install the product outdoors, on an unstable base, or anywhere unprotected from rain or excessive moisture.
- Do not place magnetic metals or other objects near the sensor during installation, as this may interfere with its operation.
- Ensure the installation surface for the door sensor is smooth, flat, dry, and clean for optimal adhesion and performance.
- Read this manual carefully before use to avoid damage or improper operation.
4. Setup
4.1 What's in the Box
- 1 x Coolo Tuya Zigbee Door/Window Sensor (Main Body + Magnet)
- 1 x CR2032 Battery (pre-installed)
4.2 Zigbee Hub Requirement
Important: This Zigbee sensor requires a Zigbee hub (gateway) to function and connect to your smart home system (Tuya Smart Life, Alexa, Google Home, etc.). The sensor cannot connect directly to Wi-Fi.

Image: A single sensor unit with text indicating that a Zigbee hub (gateway) is required.
4.3 Powering On
- Gently open the battery cover of the main body.
- Remove the battery insulation film (if present) from the pre-installed CR2032 battery.
- Close the battery cover securely. The sensor is now powered on.
4.4 Installation
Install the sensor on a door or window frame. The main body should be fixed to the stationary frame, and the magnet to the moving part (door or window). Ensure the alignment marks on both parts face each other and are within 15mm when the door/window is closed.
- Placement: For best results, install on wooden doors or windows.
- Adhesion: Use the provided 3M adhesive stickers to affix the product firmly.
- Alignment: Position the main body and magnet so their alignment marks are opposite each other.
- Gap: Ensure the gap between the main body and the magnet is less than 15mm when the door/window is closed.
4.5 Network Configuration (Pairing)
- Ensure your Zigbee gateway is powered on and in pairing mode (refer to your gateway's manual).
- With the sensor powered on, press and hold the RESET button on the main body for 3 seconds.
- Release the button when the red LED on the sensor starts flashing. This indicates the sensor is in pairing mode.
- The sensor should automatically connect to your Zigbee gateway. Once connected, the LED will stop flashing.
- Open your smart home app (e.g., Tuya Smart Life) and check if the sensor is detected and added to your device list.
5. Operating Instructions
5.1 Basic Functionality
The sensor detects the opening and closing of a door or window by sensing the separation or proximity of its main body and magnet. When the two parts separate (door/window opens), the sensor triggers an event. When they come together (door/window closes), it triggers another event.
5.2 App Integration (Tuya Smart Life)
Once paired with your Zigbee gateway and added to the Tuya Smart Life app, you can:
- View the current status (open/closed) of the door/window.
- Check battery level.
- Access historical records of open/close events.
- Set up automation routines and scenes.

Image: Mobile app displaying the status of the door sensor, including battery level.
5.3 Remote Monitoring & Alerts
Configure push notifications in your smart home app to receive instant alerts on your smartphone when a door or window is opened or closed. This provides real-time security monitoring.

Image: A person receiving a notification on their phone about a door opening, illustrating remote monitoring and security alerts.
5.4 Voice Control Integration
Integrate the sensor with voice assistants like Amazon Alexa and Google Assistant (via your Zigbee gateway and Tuya Smart Life app) to receive voice announcements or trigger other smart devices based on the sensor's status.

Image: A smart speaker announcing "The front door is open!" based on the door sensor's status, demonstrating voice alarm integration.
5.5 Advanced Features (Luminance Meter)
If your sensor model includes a luminance meter, the light value is uploaded after the sensor is triggered (e.g., door opens). For real-time light detection, you may need to set the