OPPSHINE Corn Bulb

Contents

OPPSHINE LED Corn Bulb E27 Colorful Bulb User Manual

Model: Corn Bulb

1. Introduction

Thank you for choosing the OPPSHINE LED Corn Bulb. This manual provides essential information for the safe and efficient use of your new colorful LED bulb. Please read these instructions carefully before installation and retain them for future reference.

A collage showing various LED corn bulbs emitting different colors (pink, blue, red, yellow, green, purple) and a row of bulbs in different colored bases.

Image: A collage showcasing the range of colorful LED corn bulbs available.

2. Safety Instructions

To ensure safe operation and prevent damage, please observe the following precautions:

  • Always disconnect power before installing, removing, or cleaning the bulb.
  • Do not use the bulb in wet locations or where it may be exposed to water, as it is not waterproof.
  • Ensure the bulb is compatible with your fixture's voltage (AC 220V) and base type (E27).
  • Do not disassemble, modify, or attempt to repair the bulb. This will void the warranty and may cause electrical hazards.
  • Keep the bulb away from flammable materials and heat sources.
  • Avoid direct eye exposure to the light source when the bulb is on.

3. Components

Each package contains one OPPSHINE LED Corn Bulb. The bulb features an E27 screw base for easy installation.

A close-up of an LED corn bulb emitting gold/yellow light, labeled 'Gold Color' with an inset image of the E27 screw base.

Image: Gold colored LED Corn Bulb with E27 screw base.

4. Installation

  1. Ensure the power to the light fixture is turned off at the circuit breaker before installation.
  2. Carefully remove the old bulb from the fixture (if applicable).
  3. Screw the OPPSHINE LED Corn Bulb into the E27 socket until it is snug. Do not overtighten.
  4. Restore power to the light fixture.
  5. Turn on the light switch to test the bulb.
An LED corn bulb emitting warm yellow light, installed in a hanging light fixture.

Image: An LED corn bulb installed in a hanging fixture, emitting warm yellow light.

5. Operating Instructions

The OPPSHINE LED Corn Bulb operates like a standard light bulb. Once installed in a compatible E27 fixture and power is supplied, simply use your existing wall switch or fixture switch to turn the bulb ON or OFF.

These bulbs are available in various fixed colors. The color of light emitted will correspond to the specific bulb variant you have purchased (e.g., Pink, Red, Blue, Green, Purple, Golden, White).

A close-up of an LED corn bulb emitting white light, labeled 'White Color'.

White Color

A close-up of an LED corn bulb emitting green light, labeled 'Green Color' with an inset image of the E27 screw base.

Green Color

An LED corn bulb emitting blue light, installed in a recessed ceiling fixture.

Blue Color

Image: Examples of different colored LED corn bulbs.

6. Maintenance

  • Cleaning: Ensure the bulb is off and cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: When the bulb reaches the end of its lifespan, ensure the power is off before carefully unscrewing and replacing it with a new, compatible LED bulb.
  • No other user-serviceable parts are inside the bulb.

7. Troubleshooting

Problem Possible Cause Solution
Bulb does not light up. No power to the fixture, loose connection, or faulty bulb. Check power supply and circuit breaker. Ensure bulb is screwed in tightly. Test with another working bulb.
Bulb flickers. Loose connection, incompatible dimmer switch, or voltage fluctuations. Ensure bulb is screwed in tightly. If using a dimmer, ensure it is LED-compatible. Check for stable power supply.
Light output is dim. Low voltage or bulb nearing end of life. Verify correct voltage. Replace bulb if it's old.

8. Specifications

Feature Detail
Brand NameOPPSHINE
Model NumberCorn Bulb
Item TypeLED bulbs
Led Bulb Typecorn bulb
Power SourceAC
Voltage6-10V (Note: Product title states AC 220V, please verify actual product voltage)
Base TypeE27
Luminous Flux249-2000 Lumens (500 - 999 Lumens)
Color Temperature2700K~6500K (Range for different colors)
Light Color OptionsGold, Purple, Pink, Red, Blue, Green
Beam Angle180 °
LED Chip BrandEpistar
LED Chip Model2835
Power Tolerance3%
Area5-8㎡
OccasionLIVING ROOM
ShapeBar
Length0.55m
Is Smart DeviceNo
High-concerned chemicalNone
CertificationCCC, ce
OriginMainland China

Note: There is a discrepancy in the provided data regarding voltage (6-10V vs AC 220V in title). Please refer to the product packaging for the exact voltage of your specific bulb.

9. User Tips

Based on user feedback, here are some tips for getting the most out of your OPPSHINE LED Corn Bulb:

  • Vibrant Colors: Users frequently praise the excellent quality and bright, vibrant colors of these bulbs, making them ideal for adding a pop of color to any room.
  • Decorative Use: Many users find these bulbs perfect for decorative purposes, including holiday themes or creating a specific ambiance.
  • Value for Money: The bulbs are often highlighted for their good quality and excellent price, offering great value.
An LED corn bulb emitting purple light, installed in a decorative hanging lantern, with a poster of Che Guevara in the background.

Image: A purple LED corn bulb used in a decorative lantern.

10. Warranty & Support

Your OPPSHINE LED Corn Bulb comes with a 3-year warranty from the date of purchase, covering manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

For any questions, technical support, or warranty inquiries, please contact the seller directly. You may also refer to the general user manual (PDF) for additional information, though it may be for a different product type:

View User Manual (PDF)

For common questions and answers, please check the product's Q&A section on the purchase platform.

© 2024 OPPSHINE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.