Dynoracing BX102377

Contents

Dynoracing Car Fuel Oil Pressure Liquid Filled Gauge User Manual

1. Product Overview

1.1 Product Description

This product is designed for car modification, repairing, and upgrading the performance of your car. It is engineered with high-quality material to ensure durability and compliance with EU regulations.

1.2 Function

This liquid-filled pressure gauge kit allows for accurately measuring fuel pressure. It reads from 0 to 100 PSI (0-7 kg/cm²) to maximum. Proper fuel pressure is critical at full throttle to prevent lean conditions. This fuel pressure gauge is made of high-strength aluminum alloy for maximum durability, featuring a compact design, waterproof properties, and anti-corrosion for stable performance.

Close-up view of the Fuel Pressure Gauge dial, indicating its function to measure fuel pressure from 0 to 100 PSI (0-7 kg/cm²).
Close-up view of the Fuel Pressure Gauge dial, indicating its function to measure fuel pressure from 0 to 100 PSI (0-7 kg/cm²).

2. Specifications

Attribute Value
Brand Name Dynoracing
Model Number BX102377
Special Features Car Fuel Pressure Gauge
Placement on Vehicle Fuel Pressure Gauge
Material Metal+Glass
Item Weight 0.15 KG
Pressure Range 0-100 PSI (0-7 kg/cm²)
Available Colors Red, Blue, Black
Gauge Diameter ~47mm
Gauge Height ~46mm
Interface 1 Thread 1/8-27
Interface 2 Thread M12*1.25
Dimensional diagram of the fuel pressure gauge and its two interface fittings, showing measurements in millimeters.
Dimensional diagram of the fuel pressure gauge and its two interface fittings, showing measurements in millimeters.

2.1 Compatible Vehicles

This fuel pressure gauge is compatible with a range of vehicles. Please verify compatibility with your specific vehicle model and year before installation.

  • For Honda Civic/CRX All Models 88-91
  • For Honda Civic All Models 92-95
  • For Honda Del Sol 93-97
  • For Honda Civic All Models 96-00
  • For Acura Integra All Models 90-93
  • For Acura Integra All Models Including Type-R 94-01
  • For Mitsubishi Eclipse /Eagle Talon All Models 89-94
  • For Mitsubishi Eclipse/Eagle Talon All Models 95-99
  • For Honda Prelude All Models 92-96
  • For Acura NSX All Models 91-00
  • For Honda S2000 00-03
Fuel Pressure Gauge with interfaces, listing compatible vehicle models for Honda, Acura, and Mitsubishi.
Compatible vehicle models for the fuel pressure gauge.

3. Important Safety Warnings & Compliance

3.1 EU Regulatory Compliance

This product complies with EU regulations. Do not use or modify this component beyond the scope specified in this manual, as non-compliance may invalidate vehicle type approval and lead to legal liability.

3.2 Professional Installation Required

Installation must be performed by a qualified automotive technician with relevant EU automotive repair certifications (e.g., ASE, IMI). Improper installation may cause component failure, vehicle damage, or personal injury.

3.3 Safety Precautions

  • Disconnect the vehicle battery before installation to avoid electrical short circuits.
  • Wear protective gear (safety goggles, gloves, anti-slip shoes) during installation.
  • Do not install or operate the product while the vehicle is in motion or the engine is running (except for post-installation testing as specified).

3.4 Compatibility Check

Verify that the product is compatible with your vehicle's make, model, and year before installation. Using incompatible components may result in mechanical malfunction or safety hazards.

3.5 General Safety Information

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Please dispose of this discarded product in a reasonable manner according to local regulations, without polluting the environment and protecting the health of others.

4. Package Contents

The package includes the following items:

  • 1 x Fuel Pressure Gauge
  • 2 x Interface Fittings
  • 1 x Raw Material Belt (Teflon Tape)
Contents of the package: 1 Fuel Pressure Gauge, 2 Interface fittings, and 1 roll of raw material belt (Teflon tape).
Contents of the package: Fuel Pressure Gauge, two interface fittings, and Teflon tape.

5. Installation Instructions

5.1 Pre-Installation Preparation

  1. Park the vehicle on a flat, level surface and engage the parking brake. Turn off the engine and allow it to cool completely (minimum 30 minutes).
  2. Clean the installation area (e.g., engine bay, suspension mount) with a non-corrosive cleaner to remove dirt, oil, or debris. Dry thoroughly with a clean cloth.

5.2 Step-by-Step Installation

  1. Locate the original component to be replaced or the intended installation point for the fuel pressure gauge.
  2. It is highly recommended to find professional repair personnel for installation. If you choose to install it yourself, please ensure you have rich experience and hands-on ability in this area.
  3. Connect the fuel pressure gauge using the provided interface fittings and Teflon tape to ensure a secure, leak-free connection to the fuel system.
Fuel Pressure Gauge kit components including the gauge, two interface fittings, and Teflon tape, alongside an example installation on an engine.
Example installation of the fuel pressure gauge kit on an engine.
Example installation of the fuel pressure gauge (red dial variant) within an engine bay, showing connection points.
Installed fuel pressure gauge (red dial) in an engine bay.
Example installation of the fuel pressure gauge (blue dial variant) within an engine bay, connected to the fuel system.
Installed fuel pressure gauge (blue dial) in an engine bay.

5.3 Post-Installation Testing

  1. Test whether the installed product can be used normally (e.g., whether it triggers a car malfunction alarm and whether it affects driving, etc.).
  2. If any issues are detected, stop using the vehicle immediately and contact the manufacturer or a qualified technician for inspection.
  3. Complete all steps and clean the vehicle.

6. Operation

The Dynoracing Fuel Pressure Gauge provides a continuous reading of your vehicle's fuel pressure. Once installed, the gauge will display the current fuel pressure in both PSI and kg/cm² on its dial. Monitor the readings during vehicle operation to ensure fuel pressure remains within the manufacturer's recommended range for your specific vehicle model. Deviations from the normal range may indicate issues with the fuel system.

7. Maintenance & Care

7.1 Regular Inspection

Inspect the component every 5,000 km or 6 months (whichever comes first). Check for loose bolts, cracks, corrosion, or wear. Tighten loose hardware and replace damaged parts promptly.

7.2 Cleaning

Clean the component with a soft brush. Avoid using abrasive cleaners, solvents, or high-pressure water (which may damage the surface or seals).

7.3 Replacement Interval

Replace the component if it shows signs of permanent damage or significant wear that could affect its accuracy or integrity.

7.4 Storage

If removing the component for long-term storage, clean it thoroughly, dry completely, and store in a cool, dry place away from direct sunlight and corrosive substances.

8. User Tips

  • When assembling the parts, it is recommended to use Teflon tape of better quality than the one provided to ensure a more secure and leak-free seal.
  • Ensure threads fit perfectly during installation to prevent leaks.

9. Troubleshooting

If the gauge is not providing a reading, or if the reading is inconsistent or appears incorrect:

  • Check all connections for tightness and ensure there are no leaks in the fuel line or around the fittings.
  • Verify that the gauge is properly seated and not obstructed.
  • If the issue persists, consult a qualified automotive technician for diagnosis and repair. Do not attempt to repair the gauge yourself if you lack the necessary expertise.

10. Warranty Information

10.1 Warranty Coverage

The manufacturer provides a 1-year limited warranty from the date of purchase, covering defects in materials and workmanship under normal use and proper installation. This warranty applies only to the original purchaser and is non-transferable.

10.2 Warranty Exclusions

This warranty does not cover:

  • Damage caused by improper installation, misuse, abuse, or modification of the product.
  • Wear and tear due to normal use (e.g., surface scratches, minor corrosion).
  • Damage from accidents, natural disasters, or exposure to extreme temperatures/chemicals.
  • Failure to follow maintenance instructions outlined in this manual.

11. Contact Information

Manufacturer

Company Name: Ruian Biaoxin Electronic Commerce Inc.

Address: No. 190, Youdian South Road, Tingtian Street, Ruian city, Wenzhou, Zhejiang, China, 325200

Contact: jimix-racing@hotmail.com / 86-13967716933

EU Authorized Representative

Company Name: ORIENT CONSULTING SL

Address: Av.de la Industria, 2, Nave 16, 28947 Fuenlabrada Madrid, Spain

Contact: rae@orientconsulting.es / 34-912918327

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.