1. Product Overview
The AVATTO ZigBee Wall Touch Smart Light Switch is designed to provide convenient control over your lighting. It integrates with the Smart Life/Tuya APP and supports voice control via Amazon Alexa and Google Home. This smart switch requires a Tuya ZigBee Hub for full functionality.


2. Setup and Installation
2.1 Download the Smart Life App
- Scan the QR code provided in the original manual or search for "Smart Life" in the App Store (iOS) or Google Play Store (Android) to download the application.
- Open the "Smart Life" App and register an account using your phone number or email address.
2.2 Installation Steps
CAUTION: Before installing the switch, ensure that the power supply is completely cut off (100% off).
To open the wall switch for wiring, gently pry open the front panel. For EU wall switches, typically a flat tool can be inserted into a small notch to release the panel. For US wall switches, the method is similar, often involving prying from the bottom or side.
2.3 Wiring Diagram
Important: A neutral wire is required for this smart switch to function correctly.
3.1 Wiring for EU Wall Switch with Neutral:
- Connect the Live wire (L) to the 'L' terminal on the switch.
- Connect the Neutral wire (N) to the 'N' terminal on the switch.
- Connect the Load wire (L1, L2, L3, L4 depending on gang count) from your light fixture to the corresponding 'L1', 'L2', 'L3', 'L4' terminals on the switch.
3.2 Wiring for US Wall Switch with Neutral:
- Connect the Live wire (L) to the 'L' terminal on the switch.
- Connect the Neutral wire (N) to the 'N' terminal on the switch.
- Connect the Load wire (L1, L2, L3, L4 depending on gang count) from your light fixture to the corresponding 'L1', 'L2', 'L3', 'L4' terminals on the switch.
2.4 Adding the Switch to the App
This switch requires a Tuya ZigBee Hub (Gateway) to connect to the Smart Life/Tuya APP.

2.4.1 Add Zigbee Switch on App (Tuya ZigBee Hub Required)
- Ensure your ZigBee gateway (hub) is successfully configured and connected to the Smart Life App.
- Make sure the green LED backlight on the switch is blinking fast. If not, long-press any button on the switch for 5 seconds until the green indicator rapidly blinks.
- In the Smart Life App, enter your ZigBee gateway's interface.
- Tap "Add subdevice". The ZigBee gateway will automatically search for nearby ZigBee switches.
- Once found, follow the on-screen prompts to complete the pairing process.
2.4.2 Add WiFi Switch on App (If applicable, for WiFi versions)
There are two modes to add the switch: Easy Mode (recommended) and AP Mode. Connect your phone to your home's 2.4GHz Wi-Fi network and power up your switch.
Easy Mode:
- Long-press any button on the switch for 5 seconds until the green indicator rapidly blinks.
- Open the "Smart Life" App, go to the home page, tap the "+" icon (top right) to add manually.
- Select "Electrical" then "Switch (Wi-Fi)".
- Confirm the indicator is rapidly blinking. Choose your local Wi-Fi network and input the SSID password, then tap "Confirm".
- Wait for the configuration to succeed, then tap "Complete".
AP Mode (if Easy Mode fails):
- Long-press any button on the switch for 5 seconds until the green indicator slowly blinks.
- Open the "Smart Life" App, go to the home page, tap the "+" icon (top right) to add manually.
- Select "Electrical" then "Switch (Wi-Fi)". Tap "AP Mode" on the upper right.
- Confirm the indicator is slowly blinking. Choose your local Wi-Fi network and input the SSID password, then tap "Confirm".
- Tap "Go to Connect" and select the hotspot named "SmartLife-xxxx".
- Once your phone is connected to the hotspot, return to the App.
- Wait for the configuration to succeed, then tap "Complete".
3. Operating Instructions
3.1 APP Control
Once connected to the Smart Life/Tuya APP, you can turn the lights on/off from anywhere using your smartphone. This allows for remote control and scheduling.

3.2 Voice Control
The smart switch works with Amazon Alexa and Google Home for convenient voice control. Link your Smart Life account to your Alexa or Google Home app.

Example Voice Commands:
- Alexa: "Alexa, turn on DEVICENAME." / "Alexa, turn off DEVICENAME."
- Google Home: "Ok Google, Turn on <device name>." / "Ok Google, Turn off <device name>." / "Ok Google, is <device name> on?"
To see connection details for Alexa or Google Assistant, tap the "edit" icon on the upper right of the switch page in the Smart Life App, then select "Alexa" or "Google Assistant".
3.3 Backlight Control
The switch features a backlight that can be turned on or off to avoid disturbing sleep. This setting can typically be adjusted within the Smart Life/Tuya APP under the device settings.

4. Maintenance
To ensure the longevity and optimal performance of your smart light switch, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the surface of the switch. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- Environment: Install the switch in a dry environment, away from direct sunlight, excessive heat, or moisture.
- Power Cycle: If the switch becomes unresponsive, try turning off the circuit breaker for a few minutes and then turning it back on to reset the device.
5. Troubleshooting
- Switch not responding: Ensure the power supply is on and the switch is correctly wired, including the neutral wire. Check if the circuit breaker has tripped.
- Cannot connect to App:
- Verify your phone is connected to a 2.4GHz Wi-Fi network (5GHz networks are not supported during initial setup).
- Ensure the switch is in the correct pairing mode (rapidly blinking for Easy Mode, slowly blinking for AP Mode).
- For ZigBee switches, confirm that your Tuya ZigBee Hub is powered on, connected to the internet, and successfully added to the Smart Life App.
- Try resetting the switch to factory settings (usually by holding a button for an extended period, refer to specific model instructions if different) and attempting the pairing process again.
- Voice control not working: Ensure your Smart Life account is correctly linked to your Amazon Alexa or Google Home app. Check the device name in the Smart Life app and use that exact name in your voice commands.
- Backlight not working as expected: Check the backlight settings within the Smart Life/Tuya APP.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | AVATTO |
| Model Number | ZTS02 |
| Communication Method | Zigbee |
| State of Assembly | Ready-to-Go |
| Compatibility | All Compatible |
| Origin | Mainland China |
| Neutral Wire | Required |
| Package Length | 12 cm |
| Package Width | 7 cm |
| Package Height | 4 cm |
| Package Weight | 0.2 kg |
7. Warranty and Support
For detailed warranty information and further support, please refer to the official user manual PDF available at: User manual (PDF).
If you encounter issues not covered in this manual or require technical assistance, please contact the seller or AVATTO customer support.
8. User Tips
- Neutral Wire is Essential: Many users overlook the neutral wire requirement. Ensure your electrical box has a neutral wire for proper installation.
- Check App Connection: If you experience issues with the app not connecting, double-check your Wi-Fi network (must be 2.4GHz for initial setup) and ensure the switch is in the correct pairing mode.
- ZigBee Hub First: For ZigBee versions, always ensure your ZigBee gateway (hub) is set up and functioning correctly before attempting to pair the smart switch.