Introduction
Thank you for choosing the Aigo AR12 120mm PC Case Fan. This manual provides essential information for the proper installation, operation, and maintenance of your new fan kit. The Aigo AR12 series offers impressive ARGB light effects and efficient cooling for your computer case or radiator.
Video Description: An official product video showcasing the Aigo AR12 fans with various RGB lighting effects installed in a PC case, demonstrating their aesthetic appeal and functionality.
Setup and Installation
Package Contents (Accessories)
Depending on your purchased kit, your package may include:
- AR12 Fans (e.g., 1, 3, or 5 fans)
- Control Box
- Remote Control
- Mounting Screws (12 or 20 pieces)
- Instruction Manual (this document)
Physical Installation
- Identify the desired mounting locations for your fans within your PC case (e.g., front, top, rear, bottom, or on a radiator).
- Align the fan with the screw holes and secure it using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (intake or exhaust).
Control Box Wiring
The control box is central to managing your Aigo AR12 fans and lighting. Refer to the diagram below for proper connections.

Image Description: A detailed wiring diagram for the Aigo AR12 control box. It illustrates connections for:
- Power: SATA port (connects to your power supply's SATA cable).
- Reset: Connects to your computer case's reset switch to control lighting.
- Fan1-10: 6-pin ports for connecting fans in sequence (1 to 10).
- LED1-2: Ports for connecting LED light strips.
- M/B SYNC: Connects to your motherboard's 5V-3pin ARGB header for motherboard synchronization.
- The diagram also shows connections to a power supply and optional LED strips.
- Power (SATA Port): Connect the control box to your power supply using a SATA power cable.
- Fans (Fan1-10): Connect your Aigo AR12 fans to the 6-pin ports on the control box. It is recommended to connect them in sequence from FAN1 onwards. Note that these fans use a custom 5-pin single wire connection to the Aigo fan hub.
- LED Strips (LED1-2): If you have compatible LED light strips, connect them to these ports.
- Reset (Optional): Connect your PC case's reset switch cable to the 'Reset' port on the control box if you wish to control the lighting effects via the reset button.
Motherboard ARGB Synchronization (M/B SYNC)
The Aigo AR12 fans support 5V ARGB synchronization with compatible motherboards, allowing you to control lighting effects through your motherboard's software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion 2.0, MSI Mystic Light Sync, ASRock Polychrome RGB).

Image Description: A diagram illustrating how to connect the Aigo AR12 control box to a motherboard's 5V-3pin ARGB header. It shows the 5V 3PIN interface cable connecting to the motherboard's '+5V D G' header, distinguishing it from the older '+12V G R B' RGB header.
- Locate the 'M/B SYNC' port on the control box.
- Connect the provided 5V-3pin ARGB cable from the control box to a compatible 5V-3pin ARGB header on your motherboard. Ensure correct polarity (usually marked +5V, D, G or similar). Do NOT connect to a 12V-4pin RGB header, as this can damage the LEDs.
- Once connected, you can switch control from the remote to your motherboard software using the 'RC/MB' button on the remote.
Operating Instructions
Remote Control Usage
The included remote control allows you to manage fan speed and lighting effects. Ensure the control box is powered on.

Image Description: An image of the Aigo AR12 remote control. Key buttons include:
- ON/OFF: Switches lights on/off (fan control is independent).
- RC/MB: Switches between remote control and motherboard control.
- M+/M-: Mode adjustment keys (changes lighting patterns).
- S+/S-: Speed adjustment keys (increases/decreases fan speed).
- AUTO: Cycles through all lighting patterns sequentially.
- Brightness Adjustment: Keys to adjust LED luminosity.
- Seven Color Monochromatic Shortcut Keys: Direct access buttons for common solid colors.
- ON/OFF: Press to turn the LED lights on or off. Fan operation is independent of the light switch.
- RC/MB: Press this button to switch between controlling the RGB effects via the remote control or via your motherboard's ARGB software.
- M+ / M-: Use these buttons to cycle through different lighting modes and patterns.
- S+ / S-: Use these buttons to increase or decrease the fan speed.
- AUTO: Activates an automatic mode that cycles through all available lighting patterns, with each pattern executing for approximately 5 seconds.
- Brightness Adjustment: Adjust the luminosity of the LEDs.
- Color Shortcut Keys: Direct access buttons for various solid colors.
Motherboard Software Control
If connected to your motherboard's 5V-3pin ARGB header and 'RC/MB' is set to motherboard control, you can use your motherboard's RGB software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light) to customize lighting effects.
Maintenance
To ensure optimal performance and longevity of your Aigo AR12 fans:
- Regular Cleaning: Periodically clean the fan blades and frame to remove dust buildup. Use a can of compressed air or a soft, dry cloth. Ensure the PC is powered off and unplugged before cleaning.
- Avoid Liquids: Do not use liquid cleaners directly on the fans or control box.
- Cable Management: Ensure all cables are neatly managed and not obstructing fan blades or airflow.
Troubleshooting
- Fans Not Spinning:
- Check if the control box is properly connected to the power supply via the SATA cable.
- Ensure fans are securely connected to the 6-pin ports on the control box.
- Verify your power supply is functioning correctly.
- RGB Lights Not Working:
- Check all power connections to the control box.
- Ensure the fans are properly connected to the control box.
- If using motherboard sync, ensure the 5V-3pin ARGB cable is correctly connected to the motherboard and the 'RC/MB' button on the remote is set to motherboard control.
- If using the remote, ensure the remote's battery is functional and you are within range.
- Remote Control Not Responding:
- Check the battery in the remote control and replace if necessary.
- Ensure there are no obstructions between the remote and the control box.
- Verify the control box is powered on.
- Excessive Noise:
- Ensure all mounting screws are tightened to prevent vibration.
- Check for any cables or objects obstructing the fan blades.
- Dust buildup can sometimes cause noise; clean the fans thoroughly.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Aigo |
| Model Number | AR12 |
| Fan Size | 120 MM |
| Voltage | 12V |
| Power (W) | 3.12W |
| Fan Speed | 1200 - 1350 RPM |
| Air Volume | 48.4 CFM |
| Noise Level | 20dBA |
| Fan Life | 100,000 hrs |
| Bearing Type | Fluid Bearing |
| Blade Quantity | 7 |
| Power Interface | 6pin (to controller), SATA (for controller), 5v-3pin ARGB (for motherboard sync) |
| Used For | Case, Radiator |
| Certification | CE, FCC, RoHS |
User Tips
- Quiet Operation: Many users praise the Aigo AR12 fans for their quiet operation, even under load.
- Excellent Airflow: These fans are noted for maintaining great airflow, contributing to good CPU and GPU temperatures.
- Proprietary Connectors: Be aware that Aigo AR12 fans use custom 6-pin connectors that are designed to work specifically with the Aigo fan hub/control box. They are not directly compatible with standard motherboard fan headers.
- Case Compatibility: Before purchasing or installing, ensure the 120mm fan size is compatible with your PC case's fan mounts.
- Software Control: For advanced lighting customization, utilize your motherboard's ARGB software after connecting the 5V-3pin ARGB cable and switching to motherboard control via the remote.
Warranty and Support
For warranty claims, technical support, or further inquiries, please contact your original retailer or the Aigo official customer service channel. Keep your proof of purchase for warranty validation.