CETANT PL230

Contents

CETANT Modern LED Pendant Light User Manual

Models: PL230, PLX005, PLX006

1. Introduction

Thank you for purchasing the CETANT Modern LED Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.

Multiple CETANT LED pendant lights in black and gold finishes, illuminated.
Figure 1: CETANT Modern LED Pendant Lights (Black and Gold)

2. Package Contents

Please check that all parts are present and undamaged:

  • LED Pendant Light Fixture
  • Mounting Base
  • Mounting Hardware (screws, rubber plugs, connector)
  • Instruction Manual (this document)

3. Specifications

FeatureDetail
BrandCETANT
Model NumbersPL230, PLX005, PLX006
Item TypePendant Lights
StyleModern Style
Light SourceIntegrated LED bulbs
Bulbs IncludedYes
DimmableNo
Power SourceAC
Operating Voltage85V-265V (90-260V)
Working Power16W
MaterialAluminum, Silica Gel (Acrylic shade, Iron finish)
FinishPainted Iron
Installation TypeCord Pendant
Base TypeWedge
Lampshade Color OptionsBlack, Gold
Emitting Color OptionsWarm White, Tricolor Light
Lighting Area3-8 square meters (single head), 5-10 square meters
Dimensions (approx.)Height: 40cm, Width: 9cm
Messenger Wire Length2 meters (adjustable)
Warranty2 years
Diagram showing dimensions of the CETANT pendant light: 40cm height, 9cm width, with an adjustable 2m messenger wire.
Figure 2: Product Dimensions
Diagram for the black single-head CETANT pendant light: 10cm ceiling base, 40cm lamp height, 9cm width. Material: Aluminum/Silica Gel. Light source: LED 16W. Voltage: 90-260V. Lighting area: 3-8m².
Figure 3: Black Single-Head Pendant Light Specifications

4. Safety Instructions

  • WARNING: Always turn off the main power supply at the circuit breaker before installation, maintenance, or cleaning.
  • Ensure the voltage rating of the fixture matches your power supply.
  • Do not install the lamp in flammable or humid places.
  • All electrical connections must be in accordance with local and national electrical codes. If you are unsure, consult a qualified electrician.
  • Do not touch the lamp when it is operating or immediately after turning it off, as it may be hot.
  • Keep packaging materials out of reach of children.

5. Installation Procedure

Before you begin:

  1. Check all parts and accessories of the lamp.
  2. Cut off the power supply or close the main circuit breaker.

Step-by-step Installation:

  1. Confirm Position: Confirm the desired position for the pendant light and mark the exact locations where holes need to be drilled for the mounting base.
  2. Drill Holes: Drill holes in the marked areas on the ceiling.
  3. Insert Rubber Plugs: After drilling, push the rubber plugs into the holes. Tap them gently with a hammer if necessary to ensure they are flush.
  4. Fix Mounting Base: Use a screwdriver to securely fix the pendant's mounting base to the wall/ceiling using the provided screws.
  5. Connect Wires: Connect the live wire (usually brown or red), ground wire (usually green/yellow), and neutral wire (usually blue or black) from your ceiling wiring to the corresponding wires on the lamp's connector. Ensure connections are secure.
  6. Secure Lamp Body: Carefully cut off any excess power cable length if needed, then connect the lamp's cables to the mounting base's connector.
  7. Final Attachment: Tighten the screws to firmly attach the lamp body to the mounting base on the ceiling. Ensure the lamp is stable and secure.
Two CETANT LED pendant lights hanging above a modern bedside table in a bedroom.
Figure 4: Example Installation in a Bedroom

6. Operating Instructions

Once installed and power is restored, your CETANT LED Pendant Light can be operated via a standard wall switch. This fixture is not dimmable.

  • Turning On/Off: Use your room's wall switch to turn the light on or off.
  • Emitting Color (if applicable): If you have the 'Tricolor Light' version, the light color may cycle between different temperatures (e.g., warm white, neutral white, cool white) with successive toggles of the wall switch.

7. Maintenance

To ensure the longevity and appearance of your pendant light:

  • Cleaning: Always turn off the power and allow the fixture to cool before cleaning. Wipe the lamp body and shade with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish.
  • Bulb Replacement: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.

8. Troubleshooting

ProblemPossible CauseSolution
Light does not turn onNo power supply; Loose wiring; Faulty switchCheck circuit breaker; Ensure all wires are securely connected; Test wall switch.
Light flickersLoose wiring; Incompatible dimmer (though this light is not dimmable, ensure no dimmer is used)Turn off power and check all wire connections; Ensure fixture is connected to a standard on/off switch.
Light is too dimIncorrect voltage; Large room size for light outputVerify voltage matches specifications; Consider adding more lighting fixtures for larger areas.

9. User Tips

  • Cable Appearance: Some users note the messenger wire can appear transparent. Consider this aesthetic aspect when planning your installation.
  • Material Clarification: The lamp body is primarily made of Aluminum and Silica Gel with an Iron finish, and an Acrylic shade, providing a durable and modern look.
  • Tricolor Light Function: If you selected the 'Tricolor Light' option, you can typically change the light color temperature (e.g., warm, neutral, cool) by quickly toggling your standard wall switch off and on.

10. Warranty and Support

This CETANT LED Pendant Light comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or any questions not covered in this manual, please contact your retailer or the point of purchase.

© 2023 CETANT. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.