HKIXDISTE HK-AHDFU4-D27

Contents

HKIXDISTE AHD Camera User Manual

Model: HK-AHDFU4-D27

1. Introduction

Thank you for choosing the HKIXDISTE AHD Camera. This manual provides detailed instructions for the installation, operation, and maintenance of your security camera. Please read this manual carefully before use to ensure proper setup and optimal performance.

This camera is designed for both indoor and outdoor surveillance, offering high-resolution video, advanced detection features, and robust weather protection.

2. Product Overview

2.1 Key Features

  • High Resolution: Available in 8MP and 5MP options for clear, detailed video.
  • Advanced Compression: H.265 video compression for efficient storage and bandwidth usage.
  • Color Night Vision: Full-color day and night vision with built-in smart white LED light.
  • IP66 Weatherproof: Professional security surveillance camera suitable for outdoor and indoor use, resistant to heat, cold, water, and thunder.
  • Face Detection & Playback: Automatically captures face images and allows for intelligent video playback.
  • Motion Detection & Email Alert: Configurable motion detection zones with instant email notifications.
  • Remote Viewing: Access live video from anywhere, anytime via smartphone (Android/iOS), tablet, or PC using P2P technology.
  • Easy Setup: Plug and play system for straightforward installation.
HKIXDISTE AHD Camera with features like Human Detection, Face Detection, Color Night Vision, and IP66 Waterproof

Figure 1: HKIXDISTE AHD Camera (5MP Ultra HD model shown)

2.2 Product Video Overview

Video 1: Official product overview demonstrating features like full color night vision, face detection, motion detection, IP66 weatherproofing, and remote viewing capabilities.

2.3 Package Contents (Typical)

Please check the package for the following items:

  • HKIXDISTE AHD Camera
  • Mounting Screws and Plugs
  • Power Adapter (for camera)
  • Video Cable (BNC to BNC with power)
  • User Manual (this document)

3. Setup Guide

3.1 Important Cautions

  • Password Security: Always modify the default user password immediately after initial setup to prevent unauthorized access.
  • Installation Environment: Do not install the camera in wet, dusty, or easily accessible places for children. Ensure installation in a well-ventilated area, avoiding blockage of air vents.
  • Temperature Range: Operate and store the camera within the allowed temperature range. Do not dismantle the unit.
  • Climate Suitability: This product is suitable for safe use in non-tropical climates.

3.2 Physical Installation

The camera is a bullet-style camera designed for wall or ceiling mounting. Use the provided screws and plugs to securely attach the camera to your desired location. Adjust the camera's angle to achieve the optimal viewing area.

3.3 Wiring Diagram - HD CCTV DVR System

The CCTV DVR System is plug and play and easy to set up. Remote viewing is available anywhere, anytime.

Connection Diagram for HD CCTV DVR System showing camera, DVR, monitor, power, and network connections

Figure 2: Connection Diagram for HD CCTV DVR System

Connection Steps:

  1. Connect the HD Camera to the Video Cable (BNC connector for video, DC plug for power).
  2. Connect the Video Cable's Video Input (BNC) and Audio Input (RCA, if applicable) to the corresponding ports on the DVR.
  3. Connect the DVR to a 12V Power source using the provided adapter.
  4. Connect a Monitor to the DVR using either the HDMI Output or VGA Output port.
  5. Connect Audio Output from the DVR to speakers if audio monitoring is desired.
  6. Connect a Mouse to the DVR's USB port for system navigation.
  7. For remote access, connect the DVR's LAN port to a Router via an Ethernet cable.

Note: Ensure all cables are securely connected before powering on. The system supports both IP cameras and coaxial cameras (hybrid access).

3.4 Hard Disk Drive (HDD) Installation (Optional)

If you wish to record video footage, you will need to install a professional monitoring hard disk. If you do not need local storage, you can skip this step.

  1. Remove the side and tail board screws from the DVR unit and carefully take off the cover board.
  2. Connect the power and data cables to the HDD.
  3. Carefully place the HDD inside the chassis and use screws to fasten it to the baseplate.
  4. Align the cover board with the card slot, close it, and tighten the screws.

3.5 Power On and Initial Configuration

  1. Power On: After all connections are made, turn on the DVR power. If your DVR has a power switch, ensure it is in the 'ON' position.
  2. System Start: Wait for the system to boot up. The factory default mode typically uses analog channel mode, allowing coaxial cameras to display images on the screen.
  3. Login: Follow the boot wizard prompts. You will be directed to the system login interface. The default credentials are: User Name: admin, Password: none. Click 'OK' to log in.
  4. Network Test: Navigate through the initial setup wizard. When prompted for 'Network Test', click 'Next'. If the test is successful, proceed. If it fails, click 'Network' to adjust settings.
  5. IP Channel Configuration (for Hybrid/Network Mode): If your DVR is in hybrid or network mode, click 'Next' to enter the IP channel config wizard. Use 'quick-set' to automatically add cameras.
  6. Channel Type Setting: To switch between analog, hybrid, or pure network input, go to: Main Menu > System > Channel Management > Channel Type. Select the appropriate type for your setup.

4. Operating Instructions

4.1 Face Detection & Playback

The camera supports intelligent face detection and playback features:

  • Face Detection: The system automatically captures face images from the video stream.
  • Face Playback: You can quickly search and play back video segments based on detected faces, saving time and ensuring no details are missed.
Face Detection and Playback feature showing captured faces and corresponding video timelines

Figure 3: Face Detection and Playback in action

4.2 Motion Detection & Email Alert

Configure motion detection to enhance security:

  • Setup Area: Define specific areas within the camera's view for motion detection.
  • Triggered Alerts: When motion is detected in the defined area, the system will send an email notification to your configured address.
  • Real-time Information: Receive immediate alerts on your mobile device, keeping you informed no matter your location.
Motion Detection and Email Alert process showing detection, alert, and recording

Figure 4: Motion Detection and Email Alert workflow

4.3 Color Night Vision

The camera features advanced full-color night vision:

  • Don't worry about day or night; the built-in smart white LED light records full-color video 24/7.
  • Provides clear, vibrant images even in low-light conditions, offering superior detail compared to traditional black-and-white infrared night vision.
Comparison of day and night vision, showing clear color images at night with full color night vision

Figure 5: Ultra HD Full Color Day/Night Vision

4.4 Remote Viewing Anywhere, Anytime

Access your surveillance system remotely with ease:

  • Mobile APP Access: Download the
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.