Introduction
This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your Tuya Intelligence Electronic Door Lock. Please read carefully before use to ensure proper functionality and safety. For detailed diagrams and further information, please refer to the official PDF user manual.
Key Features
- Biometric fingerprint sensor for high sensitivity and rapid response.
- Capacity to store up to 20 different fingerprints for multiple users.
- E-Key for emergency unlocking and management.
- Durable ABS panel with an elegant design.
- Surface-mounted installation, suitable for drawers, cabinets, wardrobes, and other furniture.
- Bluetooth connectivity for Tuya App integration.
- Supports remote unlock functionality when paired with a Tuya gateway (sold separately).
- Low power consumption for extended battery life.
- Low power reminder function.
Package Contents
Please check that all the following items are included in your package:
- Front Panel (Fingerprint sensor module)
- Lock Body
- Striking Plate
- Screws (various sizes for installation)
- E-Key (USB emergency power interface)
Specifications
| Attribute | Value |
|---|---|
| Model | V000230323 |
| Power Supply | DRY BATTERY (3xAAA alkaline recommended) |
| Fit Door Thickness | Within 60mm |
| Suitable Door Type | Wooden Door |
| Connectivity | Bluetooth |
| Unlock Methods | App, Fingerprint |
| Fingerprint Capacity | 20 pcs |
| Smart Home Platform | Tuya |
| Certification | CE |
| Front Panel Dimensions | 32mm x 32mm |
| Lock Body Dimensions | 86mm x 60mm x 23.5mm |
| E-Key Dimensions | 32mm x 12mm x 7.5mm |
Installation Instructions
For detailed visual guidance, please refer to the diagrams in the official PDF user manual.
Step 1: Drill the Hole
- Place the installation drawing (template) on the door. Position it approximately 45mm from the door frame to the center of the hole.
- Drill a Ø16mm hole at the marked center point.
| Door Thickness (mm) | Recommended Screw |
|---|---|
| 14mm ~ 16mm | ST2.6x10 |
| 17mm ~ 21mm | ST2.6x14 |
Step 2: Install Front Panel and Lock Body
- Insert the connecting wire into the front panel, then feed the wire through the drilled center hole.
- Fix the front panel to the door using ST2.6x10 screws and a washer.
- Fix the washer to the door panel with ST3 X10 screws.
- Insert the connection wire into the lock case.
- Fix the lock body using ST3.5X18MM screws. Ensure the distance between the center of the back panel and the opening wall is 40MM.
Step 3: Fix the Striking Plate
- Fix the striking plate to the cabinet side wall using ST3.5X18 screws.
- Ensure the latch mechanism works smoothly with the striking plate.
Setup Instructions
Adding Fingerprints (Automatic Mode)
Before adding fingerprints, ensure the lock is in its factory setting. If no fingerprints are registered, the lock will unlock with any touch.
- Place a finger on the sensor. A green light will illuminate, and the latch will retract. Keep holding your finger on the sensor. The green light will remain on, and the latch will extend. Continue holding, then remove your finger.
- A blue light will appear. Place the same finger on the sensor, then remove.
- Repeat step 2 until a long green light appears for 2 seconds, indicating successful registration of the fingerprint.
- A blue light will appear, allowing you to add more new fingerprints following the same process.
Note:
- Make sure to add at least 3 fingerprints for the lock to work optimally and securely.
- In the factory setting, if no fingerprints are registered, any finger can unlock the device.
Deleting Fingerprints
- Place any registered finger on the sensor. A green light will illuminate. Keep holding.
- The green light will illuminate again. Continue holding.
- The green light will then turn red. Remove your finger.
- A green light will appear for 2 seconds, indicating that all fingerprints have been successfully deleted.
Tuya App Connection
The lock supports connection via Bluetooth to the Tuya App for enhanced control and management.
- Download the Tuya Smart or Smart Life app from your device's app store.
- Open the app and follow the on-screen instructions to add a new device.
- Ensure Bluetooth is enabled on your smartphone. The app will guide you through the pairing process.
- For remote unlock functionality and full smart home integration, a Tuya gateway (Bluetooth hub) is required and must be properly set up and connected to your home network.
- It is recommended to set up and manage fingerprints through the Tuya app for a clearer and more guided process.
Operating Instructions
How to Unlock (Fingerprint)
- Place any registered fingerprint on the sensor.
- A green light will appear, indicating the lock is unlocked.
- Pull the door open.
How to Unlock (E-Key)
- Insert the E-Key into the emergency charging port.
- Place any finger on the sensor. The green light will flash twice, and the lock will unlock.
- Pull the door open.
How to Lock
Simply push the door closed. The door lock will automatically engage.
Maintenance
Low Battery Warning
When the battery is low, placing a registered fingerprint on the sensor will result in the green light flashing once, followed by the red light flashing thrice. A long green light will then appear, and the lock will unlock.
Action:
- Change the battery immediately after opening the door.
- Use 3xAAA alkaline batteries. Do not use carbon batteries, as they may not provide sufficient power or longevity.
Outer Power Supply (Emergency Charging)
If the internal batteries are completely depleted, you can use an external power source:
- Connect a power bank or a mobile phone charger to the TYPE-C emergency power interface on the lock.
- Once powered externally, you can unlock the lock using a registered fingerprint or the E-Key.
- After unlocking, replace the internal batteries immediately. The external power is for emergency unlocking only, not for continuous operation.
General Care
- Keep the lock clean and dry.
- Avoid exposing the lock to extreme temperatures, direct sunlight, or high humidity.
- Do not use abrasive cleaners or solvents on the lock's surface.
Troubleshooting
- Lock not responding: Check the battery level. If low, use the emergency power supply via the Type-C port and replace the batteries.
- Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering the fingerprint if the issue persists. Ensure you are using a registered fingerprint.
- Cannot connect to Tuya App: Verify that Bluetooth is enabled on your smartphone. Make sure the lock is within Bluetooth range. If remote access is desired, confirm your Tuya gateway is properly set up and connected to your home network.
- Lock unlocks with any touch: This behavior occurs if no fingerprints have been registered. To enable security, register at least one fingerprint following the setup instructions.
User Tips
- For full smart home integration and remote access features, a Tuya Bluetooth hub (gateway) is necessary.
- Setting up and managing fingerprints through the Tuya app can be more intuitive and provide clearer guidance compared to direct registration on the device.
- Remember that if no fingerprints are registered, the lock will open with any touch. Register at least one fingerprint to activate the security function.
- When the battery is low, use a power bank with a Type-C cable for emergency power to unlock, then replace the internal batteries promptly. The Type-C port is for emergency power only, not for charging the internal batteries.
- The lock uses dry batteries (3xAAA alkaline recommended), it is not rechargeable.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or visit the official Tuya website for assistance.
A detailed user manual in PDF format is available for download: User manual (PDF)