LAUNCH CRP919E BT

Contents

LAUNCH X431 CRP919E BT OBD2 Scanner User Manual

Model: CRP919E BT

Brand: LAUNCH

Important Safety Precautions

DANGER

  • When an engine is operating, keep the service area well-ventilated or attach a building exhaust removal system to the engine exhaust system. Engines produce various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.) that slow reaction time and result in death or serious personal injury.
  • Please use the included battery and power adaptor. There is a risk of explosion for using batteries that are not authorized or approved by the manufacturer.
  • DO NOT attempt to operate the tool while driving the vehicle. Have a second person operate the tool. Any distraction may cause an accident.

WARNING

  • Always perform automotive testing in a safe environment.
  • Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
  • Before starting the engine, ensure that the gear lever is positioned in Neutral (for manual transmission) or in Park (for automatic transmission) to avoid injury.
  • NEVER smoke or allow a spark or flame in the vicinity of the battery or engine. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
  • Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
  • Wear an ANSI-approved eye shield when testing or repairing vehicles.
  • Chock drive wheels and never leave the vehicle unattended while testing.
  • Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltage when the engine is running.
  • To avoid damaging the tool or generating false data, please make sure the vehicle battery is fully charged and the connection to the vehicle Data Link Connector (DLC) is clear and secure.
  • Retrieving and using Diagnostic Trouble Codes (DTCs) for troubleshooting vehicle operation is only one part of an overall diagnostic strategy. Never replace a part based only on the DTC definition. Each DTC has a set of testing procedures, instructions and flow charts that must be followed to confirm the location of the problem. This information can be found in the vehicle's service manual.
  • Automotive batteries contain sulfuric acid that is harmful to skin. In operation, direct contact with the automotive batteries should be avoided. Keep the ignition sources away from the battery at all times.
  • Keep the tool dry, clean, and free of oil, water, or grease. Use a mild detergent on a clean cloth to clear the enclosure of the equipment when necessary.
  • Keep clothing, hair, hands, tools, test equipment, and other objects away from all moving or hot engine parts.
  • Store the tool and accessories in a locked area and out of reach of children.
  • Do not use the tool while standing in water.
  • Do not expose the tool or power adapter to rain or wet conditions. Water entering the tool or power adaptor increases the risk of electric shock.
  • Do not keep using the scan tool when it is being charged.
  • This tool is a sealed unit. There are no end-user serviceable parts inside. All internal repairs must be done by an authorized repair facility or qualified technician. If there is any inquiry, please contact the dealer.
  • Keep the tool far away from magnetic devices because its radiations can damage the screen and erase the data stored on the tool.
  • Do not attempt to replace the internal rechargeable lithium battery. Contact the dealer for factory replacement.
  • Do not disconnect battery or any wiring cables in the vehicle when the ignition switch is on, as this could result in damage to the sensors or the Electronic Control Unit (ECU).
  • Do not place any magnetic objects near the ECU. Disconnect the power supply to the ECU before performing any welding operations on the vehicle.
  • Use extreme caution when performing any operations near the ECU or sensors. Ground yourself when you disassemble Programmable Read Only Memory (PROM). Otherwise, ECU and sensors can be damaged by static electricity.
  • When reconnecting the ECU harness connector, be sure it is attached firmly. Otherwise, electronic elements, such as Integrated Circuits (ICs) inside the ECU, can be damaged.

Compliance Information

Model: Creader Professional 919E BT

FCC ID: XUJX431PROV5

IC: 29886-PO1005A

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference; and
  2. This device must accept any interference received, including interference that may cause undesired operation.

The device for operation in the band 5150-5250MHz is only for indoor use.

RF Exposure Information and Statement

The SAR limit is 1.6 W/kg averaged over one gram of tissue. This device has also been tested against this SAR limit. This device was tested for typical body-worn operations 0mm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body.

This device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The RF frequencies can be used in Europe without restriction.

1. Overview

1.1 Packing List

The following items are included in the package:

  • Scan tool (Creader Professional 919E BT) x 1
  • Vehicle Communication Interface (VCI) device (DBScar VII) x 1
  • Diagnostic cable x 1
  • Power adapter x 1 (including 2 switching adaptors)
  • Password envelope x 1
  • Type-A to Type-C data cable x 1
  • Multilingual quick start guide x 1
  • User manual x 1

For a visual guide to the package contents, please watch the unboxing video:

Video: Unboxing and overview of the LAUNCH X431 CRP919E BT package contents.

LAUNCH X431 CRP919E BT package contents including scanner, VCI, cables, and case.

Image: The complete LAUNCH X431 CRP919E BT package, showing the main unit, VCI connector, diagnostic cable, power adapter, and user manuals within its protective case.

LAUNCH X431 CRP919E BT diagnostic tool and accessories neatly arranged in its hard case.

Image: The LAUNCH X431 CRP919E BT diagnostic tool and its accessories, including the tablet, VCI, and cables, organized within the hard carrying case.

1.2 Components & Controls

The diagnostic system consists of two main components: the Scan Tool and the VCI Device.

Scan Tool (Creader Professional 919E BT)

The scan tool serves as the central processing system, receiving and analyzing live vehicle data from the VCI device and displaying test results.

Front view of the LAUNCH X431 CRP919E BT scan tool tablet, showing the screen and microphone location.

Image: Front view of the scan tool tablet, highlighting the LCD screen and microphone.

  • Microphone: For audio input.
  • Type-A USB Port: Connects to the VCI device for vehicle diagnosis via data cable or to compatible add-on modules (e.g., Videoscope) or USB storage devices.
  • Type-C USB Port: Connects to an AC outlet for charging or to a PC for data exchange.
  • POWER Button: Turns the scan tool on/off. Press and hold for 8 seconds for forced shutdown.
  • LCD Screen: Displays test results and user interface.
Back view of the LAUNCH X431 CRP919E BT scan tool tablet, showing speakers and rear camera.

Image: Back view of the scan tool tablet, showing the speakers and rear camera.

  • Speakers: For audio output.
  • Rear Camera: For capturing images, useful for documenting vehicle conditions.

VCI Device (DBScar VII)

The VCI device connects to the vehicle's DLC to read vehicle data and transmit it to the scan tool.

LAUNCH DBScar VII VCI device with power, vehicle, and I/O indicator lights.

Image: The VCI device, showing the indicator lights and diagnostic port.

  • POWER Indicator: Illuminates solid red when the VCI is powered up.
  • VEHICLE Indicator: Illuminates green and flashes when the VCI is communicating with the vehicle.
  • I/O Indicator: Illuminates blue when the VCI is communicating wirelessly with the scan tool. Illuminates red when the VCI is connected to the scan tool via the data cable.
  • DB-15 Diagnostic Connector: Connects to the vehicle's OBD diagnostic socket via the diagnostic cable.
  • USB Port: For wired connection to the scan tool.

Note: Remember to remove the VCI device from the vehicle's DLC after use.

1.3 Technical Parameters

Scan Tool Specifications:

  • Operating System: Android 10.0
  • RAM: 4GB
  • Storage: 64GB
  • Display: 7-inch capacitive touch screen with 1024*600 resolution
  • Connectivity: Wi-Fi (802.11a/b/g/n/ac), Bluetooth
  • USB Ports: Type-A x 1, Type-C x 1
  • Camera: Rear-facing 8.0MP
  • Battery: 6100mAh
  • Working Temperature: 0°C ~ 50°C
  • Storage Temperature: -20°C ~ 70°C
  • Software Version: NEW
  • Hardware Version: 2026 NEW
  • Supported Languages: Arabic, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish, Turkish, Romanian, Serbian, Chinese Traditional, Thai, Persian, Chinese Simplified.

VCI Device Specifications:

  • Working Voltage: 9~18V
  • Power Consumption: ≤2.0W
  • Dimensions: 118.3mm x 69.5mm x 32mm
  • Working Temperature: 0°C ~ 50°C
  • Relative Humidity: 20% ~ 90%

2. Setup

2.1 Charging & Powering On

  1. Use the included power adaptor to charge the scan tool.
  2. After charging is complete, press the POWER button to turn the scan tool on. The system starts initializing and then enters the home screen.

Note: If the battery remains unused for a long period or is completely discharged, it may take 5 minutes of charging before the tool powers on. Only use the included power adaptor.

To turn off the tool, press and hold the POWER button until an option menu appears. Tap Power Off.

2.2 Screen Layout

The following on-screen buttons are available on the bottom of the screen:

  • Home: Navigates to the home screen.
  • Recent App: Views currently running or recently used applications.
  • VCI Connection: Shows whether the VCI device is properly connected or not.
  • Screenshot: Captures the current screen.
  • Back: Returns to the previous screen.

2.3 Language Setting

The tool supports multiple system languages. To change the language:

  1. On the home screen, tap Settings -> System -> Languages & input -> Languages.
  2. Tap Add a language, and then choose the desired language from the list.
  3. Tap and hold the desired language, drag it to the top of the screen, and then release it. The system will change to the target language.

2.4 Network Setup

The built-in Wi-Fi module facilitates network connection for updates, email, and internet browsing.

  1. On the home screen, tap Settings -> Network & Internet -> Wi-Fi.
  2. Slide the Wi-Fi switch to ON. The scan tool will search for available wireless networks.
  3. Select a wireless network. If open, it connects automatically. If encrypted, enter the network password.
  4. When "Connected" appears, the Wi-Fi connection is complete.

Note: Turn off Wi-Fi when not needed to conserve battery power.

2.5 Registration & Update

New users must register before using the tool.

  1. Tap the application icon on the home screen and then tap Login on the upper right corner.
  2. Choose between Password login or Email login. For new users, use Email login and tap New Registration.
  3. Input your Email address, tap CAPTCHA, enter the verification code, and tap Login-Register.
  4. If no scan tools are bound to this Email, tap ACTIVATE VCI.
  5. Input the 12-digit Product Serial Number and 8-digit Activation Code (found in the password envelope), then tap ACTIVATE.
  6. After VCI activation, the system enters the update center. Tap Update to install available software.

Note: Software is updated periodically. Check regularly for updates. If scan tools are already bound to the Email, it will enter the job menu directly. In this case, tap the User Info button, then Activate VCI, input details, and go to Software Update.

2.6 Connections & Communication Setup

  1. Ensure the ignition is turned off and vehicle battery voltage is within 9-14V.
  2. Locate the vehicle's DLC (Data Link Connector). For most passenger cars, it's usually under or around the driver's side of the instrument panel. Refer to your vehicle's service manual if needed.
  3. Connect the VCI device to the vehicle's DLC. For OBDII vehicles, use the included diagnostic cable. For non-OBDII vehicles, use appropriate non-16pin adaptors (sold separately).
Diagram showing common DLC locations in a vehicle.

Image: Diagram illustrating typical locations of the Data Link Connector (DLC) in various vehicle models.

Diagram showing how to connect the VCI device to the vehicle's OBDII port using the diagnostic cable.

Image: Connection diagram for the VCI device to the vehicle's OBDII port.

Note: If the DLC pin is damaged or has insufficient power, you can power the VCI via Battery Clamps Cable or Cigarette Lighter Cable (not included).

If performing diagnosis via USB, connect the USB cable from the VCI to the scan tool's Type-A USB port.

  1. Turn the ignition ON with the engine OFF.
  2. The tool is now ready for diagnostics.

The VCI device communicates with the scan tool wirelessly (Bluetooth) or via a wired USB connection. Wireless communication is automatically established after registration. USB connection provides the most stable and fastest communication and is used by default if both methods are active.

3. Operating

3.1 Job Menu Overview

The Job Menu provides access to various functions:

Name Description
Intelligent Diagnose Obtain vehicle data from the cloud server to perform quick tests via VIN decoding and check historical repair records online.
Local Diagnose Diagnose a vehicle manually.
Special Function Offers coding, reset, relearn, and other service functions.
Toolbox Provides additional add-on tools to extend scan tool functions.
Software Update Updates vehicle diagnostic software and APK.
X-431 Diagnosis Kit Includes vehicle coverage, CANBUS pin detection, CANScope, and Fix connector firmware.
Diagnostic History Convenient access to previously tested vehicle records.
Feedback Send diagnostic problems to LAUNCH for analysis.
Know Your Customer Assists merchants with business analysis and customer management.
Mall Subscribe to extra software or service functions.
LAUNCH Academy Includes repair cases, operation skills, and training videos.
User Info Manage VCI, diagnostic reports, recorded data, password, order, and login/logout.
Settings System settings for the diagnostic application.
About Software version, product manual, service agreement, and privacy policy.

3.2 Intelligent Diagnose

This function performs a quick test by decoding the vehicle's VIN (Vehicle Identification Number) to obtain data from the cloud server, streamlining the diagnostic process.

  1. Tap Intelligent Diagnose on the Job menu screen to start pairing with the VCI.
  2. After pairing, the scan tool reads the vehicle VIN. If successful, vehicle information (Year, Make, Model, Engine) will be displayed.
Screenshot of the Intelligent Diagnose screen showing decoded vehicle information for a Porsche Cayenne.

Image: Intelligent Diagnose screen displaying decoded vehicle information (e.g., Year, Make, Model, VIN) and options for Diagnostic, Scan History, and Quick Access.

  • Tap Diagnostic to start a new diagnostic session.
  • Tap Scan History to view historical repair records.
  • Tap Quick access for other functions.

Note: Not all vehicles support this function due to manufacturer settings. A stable network connection is recommended for successful VIN access.

3.3 Local Diagnose

If VIN decoding fails, you can perform a Local (Manual) Diagnose by tapping Local Diagnose on the Job menu screen.

  1. Manually select the vehicle's make, model, and year.
  2. Select the desired test item to proceed.
Screenshot of the Local Diagnose screen showing vehicle selection options like Ford, Chevrolet, VW, Honda, Toyota, Nissan.

Image: Local Diagnose screen for vehicle model selection, showing various car brands.

Health Report (Quick Test)

This function quickly accesses all electronic control units (ECUs) and generates a detailed vehicle health report.

  1. On the test item selection screen, tap Health Report.
  2. Turn on the ignition switch. The system will scan ECUs and display fault codes (red) or no fault codes (green).
Screenshot of a diagnostic trouble code report showing various fault codes and their status.

Image: Health Report screen displaying diagnostic trouble codes (DTCs) with their status (Current/Cleared) and options to Enter, Help, Code Search, X-431 FIX, Report, Compare Results, and Clear DTCs.

  • Enter: Access diagnostic function selection.
  • Search: Highlight a DTC and search online.
  • Report: Save diagnostic results. Reports are saved in User Info -> My Report -> Health Reports.

Note: DTCs are only part of diagnosis; always follow vehicle service manual procedures. Never replace parts based solely on DTC definition.

Clear Fault Code

This function erases codes after repairs. Ensure the ignition key is in the ON position with the engine off.

Note: After clearing, re-retrieve codes to confirm. If codes persist, troubleshoot using a factory diagnosis guide.

Read Data Stream

This option retrieves and displays live data from the vehicle's ECU, providing insight into performance and guiding repairs.

Caution: If driving is required for troubleshooting, always have a second person assist to avoid accidents.

Tap Read Data Stream. You can select specific items to display.

Screenshot of the data stream selection screen, allowing users to choose specific parameters to monitor.

Image: Data Stream selection screen, allowing users to select parameters like Accelerator Pedal Position and Electronic Throttle Control.

  • Select Page/All: Select all items on the current page or all items.
  • Unselect: Deselect data stream items.
  • OK: Confirm selection and proceed.

After selecting, tap OK. You can then choose display styles (Value, Graph, Combine).

Screenshot of the live data stream display in graph format, showing various sensor readings over time.

Image: Live data stream displayed in graph format, showing real-time sensor values.

  • Value: Shows parameters with numbers and lists.
  • Graph: Displays parameters in wave patterns.
  • Combine: Merges up to 4 graphs for easier comparison.
  • Save Sample: Personalize and save standard ranges of live data stream items for comparative analysis.
  • Record: Records diagnostic data for troubleshooting.

3.4 Special Function

This option provides coding, reset, relearn, and other service functions to restore vehicles to functional status after repair or replacement. Available tests vary by vehicle manufacturer, year, and and model.

Two methods for reset operations are available: Manual Reset and Auto Reset. Manual Reset requires following on-screen instructions to select options and enter data, while Auto Reset sends commands directly to the vehicle's ECU.

Image showing various special service functions like Key Programming, ABS Bleeding, Throttle Adaptation, Crank/Cam Relearn, Suspension Reset, Brake Reset, TPMS Reset, Injector Coding, SAS Calibration, Battery Register, DPF Regen, Fuel Trim Reset, Fuel Composition Reset, Zero-Point Calibration, Gearbox Relearn, Transmission Adaptation, Set Speed Limiter, VIN Relearn.

Image: Overview of 31+ special service functions, including key programming, ABS bleeding, throttle adaptation, and more.

4. Maintenance

4.1 Software Update

This module allows you to update the diagnostic software, APP, and frequently used software.

  1. Go to Software Update on the Job Menu and tap the Downloaded tab.
  2. The Available tab lists software updates, categorized as:
    • Common software: Apps associated with the diagnostic app.
    • Frequently used vehicle software: Diagnostic and Reset software.
    • Other vehicle software: Rarely used software.
  3. Tap Update to start downloading. Once finished, software packages will install automatically.

4.2 Clear Cache

This function clears the app cache. Clearing cache will result in the app restarting.

4.3 Diagnostic Software Auto Update

This function sets whether the automatic update feature is enabled.

4.4 Device Account Management

This function manages sub-accounts, allowing multiple users to use the tool and track diagnostic logs. Newly added sub-accounts have a one-year validity period, which can be modified by the main account.

Tap Device account management to add or remove sub-accounts.

4.5 Backup System Data

The tool has two USB ports for data exchange:

  • USB Type-A: For external USB storage devices. Plug the storage device into the port, swipe the screen to select the USB drive, and exchange data.
  • USB Type-C: For PC data exchange. On the home screen, tap Settings -> USB Management. Slide the USB Switch to OFF to enable the Type-C interface (it's ON by default for charging only). Plug the Type-C cable into the tool and your PC, then perform data backup once the PC recognizes the tool.

5. Troubleshooting (FAQs)

5.1 Power Management

  • How to save power? Turn off the screen when idle, set a shorter standby time, decrease brightness, turn off Wi-Fi if not required, and disable GPS if not in use.

5.2 Communication Issues

  • Communication error with vehicle ECU? Confirm the VCI device is correctly connected, the ignition switch is ON. If all checks are normal, send vehicle year, make, model, and VIN to support via the Feedback feature.
  • Failed to enter vehicle ECU system? Confirm the vehicle is equipped with the system, the VCI device is correctly connected, and the ignition switch is ON. If all checks are normal, send vehicle year, make, model, and VIN to support via the Feedback feature.

5.3 Software Issues

  • How to download the diagnostic App after resetting the scan tool? If the tool has been reset or the app uninstalled, ensure network connection. Use Method 1 (Via APP Init: Tap the mini program APP Init on the Android home screen, confirm serial number, tap OK to download/install) or Method 2 (Via official website: Open browser, go to https://en.cnlaunch.com, navigate to Service -> Downloads & Upgrade to download).
  • What to do if the language of vehicle diagnostic software does not match the system language? English is the default. After setting the system language, download the corresponding vehicle diagnostic software from the update center. If it still shows English, the software for that language may be under development.
  • How to retrieve the login password? Tap the application icon, then Login, then Set/Reset Password. Input your product S/N and follow on-screen prompts.

5.4 User Tips

  • This tool is highly effective for diagnostics and special functions such as rear brakes, DPF regeneration, and key programming.
  • Users find the CRP919E BT to have excellent build quality, ease of use, and a user-friendly interface, making it a valuable diagnostic tool.
  • It is recommended for its comprehensive features and ability to diagnose a wide range of car brands, including BMW, Mercedes, VW, Toyota, and Ford.
  • Many users report significant cost savings on mechanic fees due to the tool's dealer-level diagnostic capabilities.
  • The CRP919E BT is considered a professional, affordable Bluetooth scanner, a must-have for mechanics looking to advance their automotive tools.

6. Specifications

General Product Attributes:

Attribute Value
Brand NameLAUNCH
Item NameLAUNCH CRP919E BT PK MK808S,THINCAR PRO
Item TypeCode Readers & Scan Tools
OriginMainland China
CertificationCE, RoHS
High-concerned chemicalNone

Scan Tool (CRP919E BT) Specifications:

Attribute Value
Operate systemPowerful Android 10.0 OS
RAM + ROM4G + 64G
Display Size7 inches
Display resolution1024*600
Communication InterfaceBluetooth
Special FeaturesWifi
Software UpdateYes
Free Update Period2 Years
LanguageArabic, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish, Turkish
Software VersionNEW
Hardware Version2026 NEW
Battery6100mAh Battery
Camera functionAllows you to take photo of your vehicle situation anytime, anywhere.
Remote Assistance functionYour technician can use TeamViewer to provide remote assistance for you.

Diagnostic Capabilities:

Attribute Value
CAN FDYes
CRP919E BT Support Car SystemsOE Level FULL System Diagnosis
CRP919E BT Support 31+ Reset ServiceYES
FCA AutoAuthYES
Bi-directional Control (Active Test)YES
Auto Vin & Auto ScanYES
ECU CodingYES
Supports 150+ car brands from 1996-2023YES
Newly added function 1Tire pressure function (TSGUN extension)
Newly added function 2Battery detection portal (BST360 extension)
CRP919E BT supportDOIP (Need buy cable extra)

7. Warranty & Support

Warranty Information

The LAUNCH X431 CRP919E BT is warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user.

This warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for a defective automotive meter is repair or replacement. LAUNCH is not liable for any consequential or incidental damages.

Final determination of defects will be made by LAUNCH according to stipulated procedures.

Customer Service

If you have any questions during the operation of the unit, please contact the Seller or the LAUNCH TECH Service Center.

To expedite support, please clearly indicate your product Serial Number when providing issue feedback.

For a complete and detailed user manual, please refer to the official PDF document: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.