To Our Customers
Thank you very much for using our two-way radio. This radio features a modern design, reasonable structure, and stable functions. It is designed to meet diverse customer needs for high quality, easy operation, and perfect capability. We believe you will be pleased with its nice shape and excellent performance. This manual is suitable for using the model RT17 (also applicable to RT617).
Important Safety Information & Using Tips
Please read the following brief instructions carefully. Non-compliance with these rules may cause danger or violate the law.
- Obey local government regulations before using this radio. Improper use may violate the law and be punished.
- Turn off the radio before entering flammable or explosive areas.
- Do not charge or change the battery in flammable or explosive areas.
- Turn off the radio before getting close to blasting zones or detonator areas.
- Do not use a radio whose antenna is damaged; touching a damaged antenna can cause heat injury.
- Do not attempt to open the radio; maintenance work should be done by a technical expert only.
- To avoid troubles caused by electromagnetic interference or incompatibility, turn off the radio in places with "Do not use wireless equipment" banners, such as hospitals and other healthcare facilities.
- In cars with airbags, do not place the radio within the scope of airbag deployment.
- Do not store the radio under direct sunlight or in hot areas.
- When transmitting, keep the radio's antenna at least 5cm away from your body.
- If the radio emits a strange smell or smoke, immediately shut off its power and contact your local dealer.
- Do not transmit for excessively long periods, as the radio may heat up and potentially harm the user.
Unpacking and Checking Equipment
Welcome to your new two-way radio. Carefully unpack the radio and check the items listed below. If any item is missing, please contact your local dealer immediately.
Supplied Accessories

Image showing the complete package contents for the Retevis RT617/RT17 two-way radio.
- Transceiver (Radio Unit)
- Li-ion Battery
- Charger (with USB cable)
- Belt Clip
- Handstrap
- User Manual (this document)
Note: The antenna frequency range refers to the annular label at the bottom of the antenna.
Getting Familiar with Your Radio
Familiarize yourself with the parts of your RT617/RT17 radio:

Diagram illustrating the various components and controls of the Retevis RT617/RT17 radio.
- Antenna: For transmitting and receiving signals.
- Channel Knob: Rotate to select channels 1 to 16.
- Power/Volume Knob: Rotate clockwise to turn on the radio and increase volume; rotate counter-clockwise to decrease volume and turn off.
- Status Indicator Light: Turns red when transmitting, green when receiving. Blinks red when battery capacity is low.
- Speaker: Outputs received audio.
- Microphone: For speaking during transmission.
- PTT (Push-To-Talk) Switch: Press to transmit, release to receive.
- SP/MIC Jack (Side): Used to connect a headset/earpiece or programming cable.
- Battery Release Buckle (Back): Releases the battery pack.
- Battery Pack for Charging the Radio (Bottom): Connects to the charger.
Setup
1. Battery Installation
- Align the battery pack with the grooves on the back of the radio.
- Slide the battery pack upwards until it clicks into place, ensuring the battery release buckle is engaged.
2. Charging the Battery
Before initial use, fully charge the battery. The radio features a convenient USB charging capability.

Two Retevis RT617/RT17 radios placed on their respective charging bases.
- Connect the USB cable to the charging base and plug the other end into a suitable USB power adapter (not included) or a computer USB port.
- Place the radio (with battery installed) into the charging base. Ensure proper contact.
- The indicator light on the charger (if present) or radio will show charging status (e.g., red for charging, green for fully charged).
- Once fully charged, remove the radio from the charging base.
Basic Operation
1. Power On/Off and Volume Adjustment
Rotate the Power/Volume Knob clockwise to turn on the radio. Continue rotating clockwise to increase the volume. Rotate counter-clockwise to decrease the volume and turn off the radio.
2. Channel Selection
Rotate the Channel Knob to select your desired channel from 1 to 16. Rotate counter-clockwise to decrease the channel number, and clockwise to increase it.
3. Transmitting and Receiving (PTT Switch)
- To Transmit: Press and hold the PTT switch, then speak clearly into the microphone. The Status Indicator Light will turn red. If the channel has no transmitting frequency, a "DU DU" tone will sound, and the light will still be red.
- To Receive: Release the PTT switch. The Status Indicator Light will turn green when a signal is received.
4. Squelch Level
The squelch level determines the signal strength required to open the radio's speaker. A lower squelch level means more background noise but potentially a longer communication range, with weaker anti-interference capacity. The default setting is 5. You can adjust it via the programming software (levels 0-9, 0 being the lowest).
5. TOT (Time-Out Timer)
TOT prevents a radio from transmitting on a channel for too long and protects the transceiver from damage due to continuous transmission. If transmission exceeds the pre-set TOT time, the radio will sound "DU" and stop transmitting. Release the PTT key to return to receive status and stop the "DU" sound.
6. Scan Function
When the current channel is channel 16, the radio will automatically scan the 16 channels defined for scanning. When a scanned channel receives a signal, the radio will stop on that channel for communication.
- Note A: If scannable channels are less than 2, the radio cannot scan.
- Note B: If the radio stops on a channel with a signal, it will resume scanning 10 seconds after the signal disappears.
- Note C: To exclude a channel from scanning, select "No" in the "Scan Add" option for that channel via programming software.
7. English Voice Prompt
The voice prompt language can be selected as "English" or "None" through the programming software.
8. Battery Save Function
This function can be enabled via the programming software to extend standby time.
9. Low Battery Alert
The radio will alert you when the battery capacity reaches its minimum operating voltage.
10. Busy Channel Lock (BCL)
This function can be enabled/disabled via software to prevent transmission on an occupied channel.
- A. If the current channel does not have CTCSS/DCS, transmission is prohibited when you press PTT if there is a signal.
- B. If the current channel does not have CTCSS/DCS, and the signal also lacks CTCSS/DCS, transmission is prohibited when you press PTT.
- C. If the current channel has CTCSS/DCS, the radio will transmit when you press PTT, even if there is a signal.
11. Wide/Narrow Bandwidth Select
The default is wide band. You can select wide or narrow band through the programming software.
12. VOX (Voice Operated eXchange)
VOX allows you to transmit by speaking into the microphone without pressing the PTT key. Enable/disable VOX via the software.
- A. When VOX is on in your working channel: Speak directly into the microphone, and it will transmit automatically. The radio stops transmitting when there is no voice and waits for receiving.
- B. When a headset with a microphone is used: Adjust VOX gain for the radio to identify your voice volume. If the microphone is too sensitive, ambient noise may trigger transmission. If not sensitive enough, your voice may not be picked up. Adjust the VOX level carefully for smooth communication.
13. Scrambler
When the scrambler function is enabled, your transmitted voice will be scrambled. Other radios will only receive a clear signal if their scrambler function is also enabled.
14. CTCSS/DCS (Continuous Tone-Coded Squelch System / Digital Coded Squelch)
CTCSS and DCS are sub-audio signaling systems that prevent your radio from receiving unwanted signals on the same channel. When CTCSS/DCS is set, you will only receive signals from channels with the same CTCSS/DCS setting within communication range. If not set, you will receive all signals from the same channel. You can set CTCSS/DCS through the "ENC" or "DEC" menu in the "Channel Setting" of the software.
15. Programming Protect
You can add a programming password in the programming software. After setting, you will need to input the password before programming the radio.
Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's surface. Do not use harsh chemicals or solvents.
- Battery Care: Avoid overcharging or completely draining the battery. Store the radio and battery in a cool, dry place when not in use for extended periods.
- Antenna: Do not use the radio if the antenna is damaged. A damaged antenna can cause minor burns and affect performance.
- Avoid Extreme Conditions: Do not expose the radio to extreme temperatures, direct sunlight, dust, or moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not turn on | Battery is dead or not properly installed | Charge the battery; ensure battery is securely attached |
| Cannot transmit or receive | Wrong channel; out of range; low battery; busy channel lock active | Check channel; move closer; charge battery; disable BCL (if applicable) |
| Poor audio quality | Low battery; out of range; interference | Charge battery; move closer; check for sources of interference |
| Radio continuously transmits (stuck PTT) | PTT button stuck; VOX active | Check PTT button; disable VOX if not needed |
Specifications
General
- Channels: 16
- Working Voltage: 3.7VDC
- Working Temperature: -10°C ~ +50°C
- Weight: 106g (including antenna and battery)
- Dimensions: 116 x 53 x 36mm
Transmitter
- Frequency Range: FRS (or PMR446 depending on model variant)
- RF Power: 2W
- Modulation Type: FM
- Spurious Radiation: ≤0.75 μW
- Modulation Noise: <-40dB
- Modulation Distortion: <5%
- Frequency Stability: 5ppm
- Max Fr. Deviation: ≤ ±5KHz
- Current: ≤1200mA
- Audio Response: +6.5 ~ -14dB
- Adjacent Ch. Power: >65dB
Receiver
- Frequency Range: FRS (or PMR446 depending on model variant)
- Receiving Sensitivity: ≤0.2 μV
- Occupied Bandwidth: ≤16KHz
- Selectivity: ≥65dB
- Inter Mediation: ≥55dB
- Audio Power Output: >500mW
- Modulation Distortion: ≤10%
- Frequency Stability: 5ppm
- Current: Standby 55mA, Working 150mA
- Audio Response: +7 ~ -12.5dB
FRS Channel Table (Example)
| CH.NO | Freq.(MHz) | ERP | CTCSS/DCS | CH.NO | Freq.(MHz) | ERP | CTCSS/DCS |
|---|---|---|---|---|---|---|---|
| 1 | 462.56250 | High | 67.0 | 9 | 462.71250 | High | 146.2 |
| 2 | 462.58750 | High | 118.8 | 10 | 462.55000 | High | 123.0 |
| 3 | 462.61250 | High | 127.3 | 11 | 462.57500 | High | D743I |
| 4 | 462.63750 | High | 131.8 | 12 | 462.60000 | High | D332I |
| 5 | 462.66250 | High | 136.5 | 13 | 462.65000 | High | D243I |
| 6 | 462.62500 | High | 127.3 | 14 | 462.67500 | High | D606N |
| 7 | 462.72500 | High | 136.5 | 15 | 462.70000 | High | D731I |
| 8 | 462.68750 | High | 141.3 | 16 | 462.72500 | High | D462I |
RF Energy Exposure and Product Safety Guide
ATTENTION! Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications. RF energy, when used improperly, can cause biological damage.
All Retevis two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. Manufacturers also recommend specific operating instructions to users. These instructions are important as they inform users about RF energy exposure and provide simple procedures on how to control it.
For more information on RF energy exposure and how to control your exposure, refer to: http://www.who.int/en/
Local Government Regulations
When two-way radios are used as a consequence of employment, Local Government Regulations require users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness is facilitated by a product label directing users to specific user awareness information. Your Retevis two-way radio has an RF Exposure Product Label. Your Retevis user manual or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Radio License
Governments classify radios, and business two-way radios operate on radio frequencies regulated by local radio management departments (e.g., FCC, ISED, OFCOM). To transmit on these frequencies, you may be required to have a license. For detailed classification and use, contact your local government radio management departments. Use of this radio outside the country where it was intended to be distributed may be subject to government regulations and prohibited.
Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this radio. To comply with requirements, transmitter adjustments should only be made by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs. Replacement of any transmitter component not authorized by the local government radio management departments' equipment authorization for this radio could violate the rules.
FCC Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
CE Requirements
Shenzhen Retevis Technology Co., Ltd. declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU, ROHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at: www.retevis.com.
Restriction Information
This product can be used in EU countries and regions, including: Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE) and United Kingdom (UK). For frequency restriction warnings, refer to the package or manual section.
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
IC Requirements (Innovation, Science and Economic Development Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
RF Exposure Information
- DO NOT operate the radio without a proper antenna attached, as this may damage the radio and cause you to exceed RF exposure limits. Use only the antenna supplied or authorized by the manufacturer.
- DO NOT transmit for more than 50% of total radio use time, as exceeding this can cause RF exposure compliance requirements to be exceeded.
- During transmissions, your radio generates RF energy that can cause interference with other devices or systems. Turn off the radio in areas where signs are posted to do so.
- DO NOT operate the transmitter in areas sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.
- Portable Device: This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is limited to specific belt-clip and accessory configurations, with a separation distance of at least 2.5 cm between the user and the device or its antenna.
- Mobile Device: During operation, the separation distance between user and antenna subjects to actual regulations. This separation distance ensures sufficient distance from a properly installed externally-mounted antenna to satisfy RF exposure requirements.
- Occupational/Controlled Radio: This radio is designed for and classified as "Occupational/Controlled Use Only", meaning it must be used only during employment by individuals aware of hazards and ways to minimize them; NOT for general population/uncontrolled environments.
- General Population/Uncontrolled Radio: This radio is designed for and classified as "General Population/Uncontrolled Use".
RF Exposure Compliance and Control Guidelines and Operating Instructions
To control your exposure and ensure compliance with occupational/controlled environment exposure limits, always adhere to the following procedures:
Guidelines:
- User awareness instructions should accompany the device when transferred to other users.
- Do not use this device if the operational requirements described herein are not met.
Operating Instructions:
- Transmit no more than the rated duty factor of 50% of the time. To Transmit (Talk), push the Push to Talk (PTT) button. To receive calls (listen), release the PTT button. Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy exposure only when transmitting in terms of measuring for standards compliance.
- Transmit only when people outside the vehicle are at least the recommended minimum lateral distance away from a properly installed, externally mounted antenna.
- When operating in front of the face, worn on the body, always place the radio in a Retevis approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of non-Retevis approved accessories may result in exposure levels which exceed the IEEE/ICNIRP RF exposure limits.
Hand-held Mode:
Hold the radio in a vertical position with the microphone (and other parts of the radio including the antenna) at least 2.5 cm (one inch) away from the nose or lips. The antenna should be kept away from the eyes. Keeping the radio at a proper distance is important as RF exposure decreases with increasing distance from the antenna.
Phone Mode:
When placing or receiving a phone call, hold your radio product as you would a wireless telephone. Speak directly into the microphone.
Electromagnetic Interference/Compatibility:
NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.
Avoid Choking Hazard:
Small Parts. Not for children under 3 years.
Turn off your radio power in the following conditions:
- Before removing (installing) a battery or accessory or when charging battery.
- When you are in potentially hazardous environments: Near electrical blasting caps, in a blasting area, in explosive atmospheres (inflammable gas, dust particles, metallic powders, grain powders, etc.).
- While taking on fuel or while parked at gasoline service stations.
- On board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions.
- In any facility where posted notices instruct you to do so, hospitals or health care facilities (Pacemakers, Hearing Aids and Other Medical Devices may be using equipment that is sensitive to external RF energy).
Protect your hearing:
- Use the lowest volume necessary to do your job.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding headset or earpiece.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
- Use careful with the earphone, excessive sound pressure from earphones and headphones can cause hearing loss.
Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required for your hearing to be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.
Avoid Burns:
- Antennas: Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result.
- Batteries: When conductive material such as jewelry, keys, or chains touch exposed terminals of the batteries, it may complete an electrical circuit (short circuit the battery) and become hot, causing bodily injury. Exercise care when handling any battery.
- Long transmission: When the transceiver is used for long transmissions, the radiator and chassis will become hot.
Safety Operation:
- Forbid: Do not use charger outdoors or in moist environments; use only in dry locations/conditions.
- Do not disassemble the charger, as this may result in risk of electrical shock or fire.
- Do not operate the charger if it has been broken or damaged in any way.
- Do not place a portable radio in the area over an airbag or in the airbag deployment area. The radio may be propelled with great force and cause serious injury to occupants of the vehicle when the airbag inflates.
User Tips
- Range Optimization: For best range, ensure you have a clear line of sight between radios. Obstacles like buildings, hills, and dense foliage can significantly reduce range.
- Battery Life: To maximize battery life, use the battery save function and avoid unnecessary long transmissions. Fully charge the battery before extended use.
- Channel Etiquette: Always check if a channel is clear before transmitting to avoid interrupting ongoing conversations.
- VOX Sensitivity: If using VOX, experiment with the sensitivity settings in the programming software to find the optimal level that triggers transmission reliably without picking up background noise.
Warranty and Support
Warranty Card Information
Thank you for buying Retevis two-way radios. We strive to provide stable, clear, and efficient wireless communication services. To enjoy quality warranty service, please note the following:
- This warranty card is only applicable to two-way radios of the listed model and serial number.
- The warranty card is an important document for the end-user to enjoy warranty service; please keep it well.
- The warranty card must be filled out and stamped by the dealer, or it will be invalid.
The product warranty period begins from the purchasing date. If product failure occurs under normal use within the warranty period (radio guaranteed for 12 months, accessories 6 months), please carry the original warranty card and purchase invoice to a Retevis designated authorized warranty repair station for service.
Paid Service Conditions
The following situations occurring during the warranty period will result in paid service:
- Failure to produce the warranty card.
- The card has altered traces or is inconsistent with the product.
- Defect or damage caused by abnormal or non-normal use, misuse, accident, water, or negligence.
- Defect or damage caused by improper testing, operation, maintenance, installation, disassembly, or adjustment.
- Defect or damage caused by unauthorized repair or disassembly.
- Defect or damage caused by force majeure.
- Wear and tear under normal use.
If you need repair, please send the radio, warranty card, and purchase invoice together by post or take directly to Retevis designated authorized service stations. Shipping costs should be borne by the user.
Contact Information
Shenzhen Retevis Technology Co., Ltd
Web: www.retevis.com
E-mail: kam@retevis.com
Facebook: facebook.com/retevis
Address: 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China
