PaiPaitek PD 529

Contents

PaiPaitek PD 529 Dog Training Collar User Manual

Pet Training Systems

1. Introduction and Safety Information

Thank you for purchasing the remote dog training collar PD 529. This product has been tested to meet stringent quality standards and is covered with a 12-month warranty from the date of original purchase.

1.1. Safety Instruction

Training collars are used to train dogs, not for punishment. Use properly with care, and the collar can be a safe and effective tool to train. Building communication and strengthening your bond with your best friend. Obey all safety messages that follow this instruction to avoid possible injury.

If your dog has heart disease, high blood pressure, cerebral thrombosis, skin allergies, etc., please do not use this product.

1.2. General Tips

  • If your dog doesn't respond to training in the first few times, don't give up or increase the stimulation. Instead, try working on the training for a few more times.
  • During the training period, never give the command if you are not able to enforce it. Your dog has to make the mental connection between the static shock/vibration/beep to its behavior (may take a week or more for some dogs).
  • Both methods of stopping unwanted behavior and reinforcing learning behaviors can be applied to nearly every training scenario.

2. Package Contents

The package includes the following components:

Contents of the dog training collar package laid out
Contents of the dog training collar package laid out.
Box contents including remote, receiver, collar, and accessories
Box contents including remote, receiver, collar, and accessories.
Another view of the box contents
Another view of the box contents.

2.1. PD 529-1 (For 1 dog)

  • 1 x Remote Transmitter
  • 1 x Receiver
  • 1 x Collar Strap
  • 2 x Long Contact Points
  • 1 x USB Charging Cable
  • 2 x Short Contact Points
  • 2 x Long Conductive Silicone Caps
  • 1 x Test Lamp
  • 2 x Short Conductive Silicone Caps
  • 1 x User Manual
  • 2 x Anti-Shock Pads
  • 1 x Lanyard

2.2. PD 529-2 (For 2 dogs)

  • 1 x Remote Transmitter
  • 2 x Receivers
  • 2 x Collar Straps
  • 4 x Long Contact Points
  • 1 x USB Charging Cable
  • 4 x Short Contact Points
  • 4 x Long Conductive Silicone Caps
  • 1 x Test Lamp
  • 4 x Short Conductive Silicone Caps
  • 1 x User Manual
  • 4 x Anti-Shock Pads
  • 1 x Lanyard

2.3. PD 529-3 (For 3 dogs)

  • 1 x Remote Transmitter
  • 3 x Receivers
  • 3 x Collar Straps
  • 6 x Long Contact Points
  • 1 x USB Charging Cable
  • 6 x Short Contact Points
  • 6 x Long Conductive Silicone Caps
  • 1 x Test Lamp
  • 6 x Short Conductive Silicone Caps
  • 1 x User Manual
  • 6 x Anti-Shock Pads
  • 1 x Lanyard

3. Product Overview

PaiPaitek PD 529 Dog Training Collar remote and receiver
PaiPaitek PD 529 Dog Training Collar remote and receiver.
Diagram showing product parameters and button functions for the remote and receiver
Diagram showing product parameters and button functions for the remote and receiver.

3.1. Remote Transmitter Buttons and Indicators

  • LED Light: Indicator light.
  • LCD Screen: Displays settings and levels.
  • + Button: Increase level.
  • - Button: Decrease level.
  • Vibration Button: Activates vibration function.
  • Tone Button: Activates warning sound function.
  • Static Shock Button: Activates static shock function.
  • Power Button: Turns the remote transmitter on and off.
  • Signal Channel Button (CH): Selects training channel (1, 2, or 3).
  • LED Light Button: Activates flashlight function.
  • USB Charging Port: For charging the remote.

3.2. Receiver Collar Components

  • Indicator Light: Shows status and power.
  • Power Button: Turns the receiver on and off, and checks power.
  • Contact Points: Deliver stimulation. Choose suitable length for dog's hair thickness.
  • USB Charging Port: For charging the receiver.

4. Specifications

AttributeValue
ModelPD 529
Item TypeTraining Collars
Target PetDog (Small, Medium & Large Sized Dogs)
Working ModeSound / Vibration / Static Shock
Vibration / Static Shock Levels1-100 Levels
Remote Range1000m / 3300ft / 1100yds
Channels3 Channels
Battery TypeRechargeable Li-on Battery
Battery IncludedYes
Remote Transmitter Battery Capacity300mAh
Receiver Battery Capacity650mAh
Remote Transmitter Running Time90 days+
Receiver Collar Running Time45 days+
Charge Time3 Hours (Fully charged in 2 hours)
Waterproof LevelReceiver Collar: IPX7, Remote Transmitter: IPX5
MaterialPlastic
Net Weight (Remote Transmitter)50g
Net Weight (Receiver)45g
Diagram illustrating long-lasting battery life and USB charging methods
Long-lasting battery life: Fully charged in 2 hours. Remote work time up to 60 days, Receiver work time up to 30 days. Easy charging by PC/Laptop/Phone Charger/Power Bank.
Diagram showing the three humane training modes: Beep, Vibration, and Shock, with 1-100 levels for vibration and shock
3 Humane Modes: Beep (1 Level), Vibration (1-100 Levels), Shock (1-100 Levels).
Image demonstrating the IPX7 waterproof rating of the receiver collar, suitable for swimming, rainy days, and bathing
IPX7 100% Waterproof: Professional waterproof bark collars for dogs, suitable for swimming, rainy days, and bathing.
Diagram showing collar length and dog neck size compatibility for various dog breeds (4-150 lbs)
For All Size Dogs: Collar length 28.35 inches, width 0.7 inches. Fits 8-27 inch dog's neck. Suitable for dogs 4-150 lbs.

4.1. Reference Weight for Dogs

Size (Dog)Neck (In)Chest Measurement (In)Back Length (In)Breed
Mini7.8-8.69.8-11.817.5Chihuahua, Yorkshire Terrier
Small7.8-9.511.4-14.29Chihuahua, Yorkshire Terrier, Poodle, Pomeranian
Medium9.0-11.013.7-16.511Maltese Dog, Shih Tzu
Large9.6-12.216.2-18.512.2Miniature Schnauzer, Pekingese
Large11.8-13.418.1-20.813.8Schnauzer, English Cocker Spaniel
Large13.0-14.520.5-23.215.7Beagle
Huge17.0-18.930.0-33.023.6Husky

5. Setup and Operation

5.1. Before Using the Dog Training Collar

  • Do not expose to extreme heat or store at temperatures above 113°F or 45°C.
  • Always keep the dog training collar out of reach of children.
  • Charge the remote transmitter and receiver at least 2 hours upon receiving them. The collar cannot receive any signals while it is being charged.

5.2. Charging the Device

Choose a USB charger with input 100-240V ~ 50-60Hz and output 5V 1000mA (or 300mA/500mA). You can use a smartphone charger, laptop, or computer USB interface.

Charging the Remote Transmitter:

  1. Connect the charger cable to the charging port.
  2. Plug the charger into a standard socket.
  3. The battery icon will flash during charging and become solid when charging is complete.

Charging the Receiver:

  1. Remove the rubber cover, connect the receiver to a charger into a standard socket.
  2. The red indicator light will flash slowly when the receiver is charging. After fully charged, the red indicator light stays on.
Close-up of the USB charging ports on the receiver
USB charging ports on the receiver.

5.3. Turning the Receiver On and Off

  • Turn On: Short press the power button once. The receiver will make a short "beep" sound, indicating it is turned on.
  • Turn Off: Long press the power button once. The receiver will make a long "beep" sound and the indicator light will no longer flash.

5.4. Checking Receiver Power

When the receiver is turned on, press the power button twice quickly to check the power:

  • 5 beeps: 100% (80-100%)
  • 4 beeps: 80% (60-80%)
  • 3 beeps: 60% (40-60%)
  • 2 beeps: 40% (20-40%)
  • 1 beep: 20% (1-20%)

5.5. Pairing the Remote Transmitter and Receiver

  1. Turn on the remote transmitter. Press the CH button to choose a signal channel you want to use.
  2. Hold the power button on the receiver for 2 seconds. When the indicator light starts flashing, press one of the function buttons (beep, vibration, or static shock) on the remote transmitter to pair.
  3. If you do not press a function button within 10 seconds, you will need to repeat the pairing process.

Note: For PD 529-1 (1 dog), you can choose any channel. For PD 529-2 (2 dogs), you can choose the same signal channel for both receivers or different channels. For PD 529-3 (3 dogs), you can choose the same signal channel for all receivers or different channels. Remember the chosen signal channels.

5.6. How to Wear Receiver Collar Correctly

Correct wearing position helps ensure healthy and effective dog training.

  1. The receiver should be placed at the bottom of the dog's neck, and the screw caps must make direct contact with the dog's skin.
  2. If your dog has thick hair, please use longer screw caps.
  3. The anti-shock pads can prevent skin abrasion. It's recommended to use them 2-3 times a week.
  4. The space between the receiver collar and the dog's neck should be maintained at a finger's distance. If it's too loose, static shock effectiveness will be negatively impacted.
  5. The extra part of the strap can be trimmed or handled with other methods.
Close-up of receiver contact points and protective caps
Receiver contact points and protective caps.
Receiver, contact points, caps, and wrench for installation
Receiver, contact points, caps, and wrench for installation.
Receiver with contact points installed
Receiver with contact points installed.

5.7. Function Testing

A video demonstrating the unboxing, basic functions (sound, vibration, static shock, flashlight), waterproof test, and collar assembly for the PaiPaitek PD 529 Dog Training Collar.

Warning Sound Function:

Press the Tone button on the remote. The receiver will make a beep sound. The tone function is not adjustable.

Vibration Function:

Press the Vibration button on the remote. The receiver will vibrate. Levels 1-100 are adjustable.

Static Shock Function:

Static shock cannot be seen by the naked eye. Use the provided test lamp. Place the test lamp over the contact points and press the Static Shock button on the remote. The test lamp will light up.

Flashlight Function:

Press the LED Light button on the remote to activate the flashlight.

5.8. Waterproof Test (IPX7)

The receiver collar is waterproof up to IPX7 level, meaning it can be submerged in water. The remote transmitter is IPX5 rated, meaning it is splash-proof but not suitable for submersion.

6. Training Guidelines

6.1. Reinforce Learning Behaviors

If your dog knows a command but responds inconsistently, a training collar can sharpen its skill. For example, if you have taught your dog to come when calling, but over time he responds slower, you can communicate with him via the remote transmitter so that he responds to your call immediately.

  1. Set the collar to an initial stimulation level and test it.
  2. Fit the collar on your dog's neck along with his regular collar.
  3. Let him roam around the training area. Then give the command and press the stimulation button simultaneously.
  4. If your dog moves toward you, stop stimulation and praise him.
  5. If he stops before he reaches you or turns away, repeat the command and continue the stimulation. Again, stop at the instant he runs to you and rewards him by praising him or feeding him a treat. Repeat this for 3 or 4 times.

6.2. When Using the Dog Training Collar

  • Avoid leaving the collar on the dog for more than 18 hours per day.
  • If possible, please reposition the collar on the dog's neck every 1 to 2 hours.
  • Check the fit to prevent excessive pressure.
  • The charging rubber cap must be closely covered when your dog is swimming or the receiver will get broken when getting into water from the interface. Taking off the receiver is recommended.
  • The receiver will turn off automatically after 10 seconds of "beep" sound when the battery is low.

7. Maintenance

  1. Examine regularly to ensure tightness of the receiver and eliminate any external damages.
  2. Clean the screw caps with alcohol weekly.
  3. Examine your dog's neck and clean up weekly.
  4. The battery is rechargeable. To maintain battery life, please charge it every 2 months if it is not often used.

8. User Tips

  • Ensure the contact points are properly screwed in and the collar is worn correctly for effective training.
  • If the collar is not responding, check the battery levels of both the remote and receiver, and ensure they are properly paired to the correct channel.
  • For dogs with thick fur, use the longer contact points to ensure proper contact with the skin.
  • Regularly check your dog's neck for any irritation or redness, especially if using static shock. Discontinue use if irritation occurs and consult a veterinarian if it persists.
  • Do not attach a leash directly to the receiver collar, as this can pull the contact points too tightly against the dog's neck. Use a separate collar for leashes.
  • Training sessions should be kept positive and short, ideally 10-15 minutes each time.
  • If you are testing the static shock function on yourself, ensure you touch both contact points simultaneously for it to work.

9. Troubleshooting (FAQ)

Q: How old can my dog be to use a dog training collar?

A: Do NOT use on puppies younger than 6 months.

Q: Can I use the dog training collar for more than one dog?

A: Yes, you can simply add one or two receivers to the system to control two or three dogs, because three dog channels are available with one remote transmitter.

Q: What should I do if my dog's neck becomes red and irritated?

A: Stop using the dog training collar for a few days. If the condition persists beyond 48 hours, please ask your veterinarian to check. Continue to monitor your dog's skin condition closely even if the skin becomes normal.

Q: Can I attach a leash to the receiver?

A: NO. This will result in pulling the screw caps (contact points) too tightly against your dog's neck. Use a separate collar placed above the receiver.

Q: How do I know when to charge the battery of the dog training collar?

A: For Remote Transmitter: The battery level icon will be displayed on the left down side of LCD screen. For Receiver: press the power button twice quickly to check the battery level, if only one beep is emitted, charge it on time.

Q: How long can I leave the receiver on my dog?

A: The receiver is not designed to be worn constantly. We recommend to wear the receiver on your dog less than 18 hours per day.

Q: How long should I process my training session for my dog?

A: Training sessions should be kept positive and short, it is better for about 10-15 minutes each time.

Q: What are the proper levels of static shock for my dog?

A: Try to find the best suitable levels of static shock for your dog starting from the lowest level. Excessive levels of stimulation will cause strong response from your dog.

Q: What is the effective distance of your dog training collar?

A: Without obstacles, the effective distance could be as far as 1000 meters between remote transmitter and receiver collar. However in reality, a list of factors, including telecom signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, land form, vegetative cover, etc, will influence transmission of signals from remote transmitter and the actual effective distance of the remote transmitter.

Q: Once my dog is trained and has obeyed to my commands, is it still necessary for my dog to continue wearing the receiver?

A: Yes, you may need to reinforce your dog's memory with the receiver from time to time.

Q: Any other better training methods?

A: You can prepare some dog food for training incentive to achieve better training outcomes. Each time after you restrain your dog's misbehavior, you can tell your dog what is supposed to do and what is not. After a few times of repetitions, your dog will understand what you like and what you don't like.

Q: I want to test static shock function of receiver myself, but it does not work, is anything wrong?

A: If you test receiver collar by your hand or leg, please touch the 2 screw caps (contact points) at the same time, touching only one screw cap (contact points) will not work.

Q: The dog training collar does not work, or my dog does not respond after correct installation of the dog training collar, how should I solve this problem?

  1. Make sure the battery of remote transmitter and receiver collar have enough power to operate.
  2. Check to see if receiver collar is turned on.
  3. Check signal channel button on remote transmitter to ensure signal channels are correctly configured.
  4. Try to pair the remote transmitter and receiver again.
  5. Take off receiver collar and test all of the three functions work properly.
  6. Make sure receiver collar is properly worn and the receiver collar is not loose.
  7. Trim your dog's hair where the screw caps (contact points) can touch the neck.

10. Warranty and Support

This product is covered with a warranty for 12 months from the date of its original purchase.

Any defective part will be repaired or replaced at no charge if the appliance has not been tampered with and has been used according to these printed directions.

If any problems occur, please contact the local dealer immediately to launch a warranty claim. Our consumer service representative will respond within 1 business day, advise you how to correct the problem yourself or instruct you on how to return the defective unit back to us for repair or replacement.

For a more detailed guide, you can refer to the full user manual available in PDF format: PaiPaitek PD 529 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.