Malcayang Dynamic Mirror Indicator Turn Signal Light for Audi B8/B8.5 Series

Contents

Malcayang Dynamic Mirror Indicator Turn Signal Light User Manual

For Audi A4 A5 B8 B8.5 A3 8P Q3 A6 C6 4F S6 SQ3 A8 D3 8K RS3 RS4 S5

1. Product Overview

This manual provides instructions for the installation, operation, and maintenance of your Malcayang Dynamic Mirror Indicator Turn Signal Lights. These LED lights are designed to replace your vehicle's original side mirror turn signals, offering enhanced brightness and a modern sequential (flowing) blinker effect.

Key Features:

  • High Brightness
  • Dynamic Sequential Blinker
  • 100% Waterproof
Front view of two dynamic LED turn signal lights with exposed wiring, highlighting High Brightness, Dynamic Blinker, and 100% Waterproof features.
Front view of two dynamic LED turn signal lights with exposed wiring, highlighting High Brightness, Dynamic Blinker, and 100% Waterproof features.

2. Safety & Warnings

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

Note: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.

3. Package Contents

The package includes:

  • One pair of Dynamic Mirror Indicator Turn Signal Lights (right and left).
Back view of the two turn signal light units, showing mounting points and QC stickers.
Back view of the two turn signal light units, showing mounting points and QC stickers.

4. Specifications

Attribute Value
Brand Name Malcayang
Item Type Turn Signal
Function Sequential scroll mirror indicator
For Vehicle Brands/Model Audi
Voltage 12 V
Lumens 2400LM
Wattage 3-5W
Item Weight 0.16kg
Origin Mainland China
Length 200mm
Width 65mm
Diagram showing the dimensions of one turn signal light unit: 200mm length and 65mm width.
Dimensions of the turn signal light unit.

5. Installation Instructions (Setup)

The installation process is designed to be straightforward, replacing the original equipment manufacturer (OEM) signal lights directly.

  1. Carefully remove the original car parts to access the internal screws/clips of the side mirror assembly.
  2. Loosen the screws/clips to further remove the cover or cap of the side mirror.
  3. Disconnect the wiring from the OEM signal light.
  4. Remove the OEM signal light.
  5. Connect the wiring of the new Malcayang Dynamic Mirror Indicator Turn Signal Light to the vehicle's electrical system.
  6. Insert the new signal light into position.
  7. Secure the cover/cap and re-attach any removed car parts.

It is recommended to test the functionality of the new lights before fully reassembling the mirror and vehicle parts.

Multiple views showing the dynamic LED turn signal lights installed on a car's side mirror, illustrating the sequential light pattern.
Example of installed dynamic turn signal lights on a car mirror.

6. Operation

Once installed, the dynamic mirror indicator turn signal lights will operate in conjunction with your vehicle's turn signal system. When activated, the amber LEDs will illuminate in a sequential, flowing pattern from the inside to the outside of the mirror, providing a modern and highly visible indication of your turning intentions.

Close-up of a single dynamic LED turn signal light demonstrating the sequential flowing amber light effect.
Close-up view of the dynamic flowing light effect.
Video demonstrating the dynamic smoked yellow sequential blinking effect of the B8.5 turn signal lights.

7. Maintenance

These LED turn signal lights are designed for durability and minimal maintenance. To ensure longevity and optimal performance:

  • Regularly clean the surface of the lights with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners.
  • Periodically inspect the lights for any signs of damage or loose connections.
  • The lights are 100% waterproof, but avoid directing high-pressure water jets directly at the seals during car washes.

8. Troubleshooting

If you encounter issues with your dynamic mirror indicator turn signal lights, consider the following:

Lights Not Functioning:

  • Check Connections: Ensure all wiring connections are secure and correctly made.
  • Vehicle Fuse: Verify that the vehicle's fuse for the turn signals is intact and not blown.
  • Damage: Inspect the light unit and wiring for any visible damage. Do not use if damaged.

Compatibility Issues:

  • Ensure the product is compatible with your specific Audi model and year (e.g., B8 vs B8.5). Incorrect fitment can occur if the exact sub-model is not verified.
  • For example, some users have reported issues with specific B8 models when B8.5 was required. Always double-check the product description against your vehicle's exact specifications.

9. User Tips

  • Verify Compatibility: Before purchasing and installing, meticulously compare your vehicle's model, year, and specific sub-model (e.g., B8 vs B8.5) with the product's compatibility list to avoid fitment issues.
  • Professional Installation: While installation is designed to be direct, if you are unsure about electrical connections or disassembling vehicle parts, consider professional installation.

10. Warranty & Support

For any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible. For detailed information regarding the product, please refer to the official user manual PDF:

View User Manual (PDF)

Manufacturer Information:

Company Name: Guangzhou yangchi auto parts co.LTD
Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou
E-Mail: ouyan99@dingtalk.com
Telephone: 18102513142

EU Authorized Representative:

Company Name: CET PRODUCT SERVICE LTD
Address: Osterholzallee 144, 71636 Ludwigsburg Germany
E-Mail: info.cetservice@gmail.com
Telephone: +4971416432236

Compliance Information: OST_EU_20220224000026

eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main, Germany
contact@evatmaster.com

11. Frequently Asked Questions (FAQ)

Q: Is this turn signal compatible with an AUDI Q3 2017?
A: Compatibility varies by specific model and year. Please refer to the product's detailed compatibility list or consult with the seller to confirm fitment for your AUDI Q3 2017 model.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.