Chevolink 121JL

Contents

Chevolink Smart WiFi+BLE Light Switch User Manual

Model: 121JL

Brand: Chevolink

1. Introduction

This manual provides comprehensive instructions for the installation, setup, and operation of your Chevolink Smart WiFi+BLE Light Switch. This smart switch is designed to integrate seamlessly into your smart home ecosystem, offering convenient control via mobile application and voice assistants like Amazon Alexa and Google Home.

The switch is available in various gang configurations (1, 2, 3, or 4 gang) and supports both neutral wire and no-neutral wire installations.

Chevolink Smart Switches in white and black, showing 1, 2, 3, and 4 gang options. Works with Alexa, Google Home, and Tuya.

Figure 1: Chevolink Smart Switches (various gang options)

2. Safety Information

WARNING: For your safety, always shut off the power at the circuit breaker before performing any electrical installation or maintenance.

Circuit breaker in a living room setting, with a red warning circle around the switch. Text: For safety, please shut off the power before installation.

Figure 2: Always turn off power before installation.

Important Notes Before Installation:

  • This device only supports a 2.4GHz Wi-Fi network (802.11 b/g/n). 5GHz networks are not supported.
  • Only supports single-pole wiring; not compatible with 2-way switches unless configured for wireless parallel control via app.
  • This product does not have a relay function.
  • If you lack basic electrical wiring knowledge or experience, please consult a professional electrician. Pay attention to power-off safety during installation.
  • The ON/OFF button can be used as a reset button. Long press any key for 10 seconds to reset your smart switch to factory defaults. Only do this if you are sure you want to erase all your settings.

3. Package Contents

Please check the box for the following items:

  • 1 x Smart WiFi Switch (1, 2, 3, or 4 gang, depending on model)
  • 1 x User Manual
  • 2 x Screws
  • 1 x Capacitance (for no-neutral wire installations)
Package contents: Smart WiFi Switch, user manual, screws, and a capacitor.

Figure 3: Included items in the package.

4. Specifications

AttributeValue
Brand NameChevolink
Model Number121JL
Item TypeSWITCHES
Switch TypeAPP Control
FeaturesNeutral Wire/No Neutral Wire
Is Smart DeviceYes
Current10A
MaterialPlastic (with glass touch panel)
VoltageAC100-240V / 50Hz/60Hz
Max. Load (INC)10-400W/gang
Max. Load (LED)5-200W/gang
Wireless TypeWi-Fi + BLE
OriginMainland China
CertificationRoHS, CE
Warranty1 year

Product Dimensions:

Diagram showing product dimensions. Front panel: 7.2cm (2.83inch) width, 11.8cm (4.65inch) height. Depth from wall: 0.9cm (0.35inch). Back module: 6.7cm (2.64inch) height, 4.8cm (1.89inch) width, 3.5cm (1.38inch) depth. Overall thickness: 0.3cm (0.12inch).

Figure 4: Product Dimensions (US Standard)

5. Installation

Before proceeding, ensure the power is OFF at the circuit breaker. Select the appropriate wiring method for your home's electrical setup.

5.1. Live + Neutral Wiring

This method requires a neutral wire connection. The neutral wire must be connected to the 'N' terminal on the switch. Connect the live wire to the 'L' terminal and the light wires to L1, L2, L3, L4 terminals as applicable for your gang switch.

Wiring diagram for smart switch. Left side shows 'Need Neutral' wiring: Live Wire, Neutral Wire, and Light Wires connected to the switch. Right side shows 'No Need Neutral' wiring: Live Wire and Light Wires connected, with a capacitor connected between L1 and Neutral Wire (simulated).

Figure 5: Wiring Diagram (Need Neutral vs. No Need Neutral)

Video 1: Installation and App Setup Guide (0:16 - 0:35 for Live+Neutral Wiring)

5.2. No Neutral Wiring

If your electrical box does not have a neutral wire, you can still install this smart switch by using the included capacitance. The capacitor must be connected between the L1 terminal and the neutral wire (simulated neutral, typically the light fixture's neutral connection). Connect the live wire to the 'L' terminal and the light wires to L1, L2, L3, L4 terminals as applicable.

Note: The capacitor is crucial for stable operation in no-neutral setups and helps prevent flickering or ghosting of LED lights. Ensure it is correctly installed.

Video 2: Installation and App Setup Guide (0:36 - 0:56 for No Neutral Wiring)

5.3. Post-Installation Check

After completing the wiring and securing the switch, turn the power back ON at the circuit breaker. Test the switch by touching the buttons to ensure the lights turn on and off correctly.

Video 3: Post-installation light testing (0:57 - 1:02)

6. App Setup and Pairing

6.1. Download and Register the App

Scan the QR code provided in the manual or search for "Smart Life" in your device's app store (iOS App Store or Google Play). Download and install the app. Register for an account using your phone number or email.

6.2. Pairing the Switch (Bluetooth Mode)

  1. Ensure your phone's Bluetooth and Wi-Fi are turned ON.
  2. Power on the switch. The switch indicator light will automatically enter a fast flashing status.
  3. If the switch is not connected to the app within 3 minutes, the indicator will remain ON. To re-enter pairing mode, long-press any button for about 10 seconds until the indicator starts flashing again.
  4. Open the Smart Life app. A pop-up window named "device to be added" should appear at the bottom. Click "Add". If no pop-up appears, restart the app.
  5. Enter your 2.4GHz Wi-Fi network credentials (SSID and password) and click "NEXT".
  6. Wait for the connection to complete, then click "Done".
Smart switch with app control interface showing device addition and Wi-Fi settings.

Figure 6: App Interface for Device Pairing.

Video 4: App Pairing Process (1:03 - 1:11)

7. Operating Instructions

7.1. Basic Control

Once paired, you can control the lights directly from the Smart Life app. Each gang on the switch will appear as a separate control button in the app.

Video 5: App Control of Lights (1:12 - 1:18)

7.2. Scheduling and Timers

The Smart Life app allows you to set schedules, countdown timers, and circulate modes for your lights. This enables automated control based on your daily routine.

  • Countdown: Set a timer for the lights to turn on or off after a specified duration.
  • Schedule: Program specific times for the lights to turn on or off on selected days of the week.

Video 6: Countdown and Scheduling Features (1:20 - 1:29)

7.3. Backlight Control

You can turn the backlight of the switch buttons on or off via the app settings, allowing for customization based on your preference.

Video 7: Backlight Control (1:30 - 1:33)

7.4. Voice Control

The Chevolink Smart Switch is compatible with Amazon Alexa and Google Home. Once integrated, you can use voice commands to control your lights.

Woman on a couch with Amazon Echo and Google Home devices. Text: Voice Control. Alexa, turn on the light. OK.

Figure 7: Voice Control with Alexa and Google Home.

Video 8: Voice Control Demonstration (1:34 - 1:37)

8. User Tips

  • Parallel Wiring: The switch supports wireless parallel key programming, allowing two distant switches to control the same light.
  • Capacitor Installation: If using the 'no neutral wire' setup, ensure the capacitor is correctly installed. Some users find this step to be the most challenging part of the installation.
  • Professional Installation: If you are unsure about electrical wiring, it is highly recommended to hire a professional electrician, especially for 'no neutral wire' setups.
  • Versatile Use: This smart switch can be used to control various lighting fixtures, including ceiling fans.
  • LED Compatibility: The switch is compatible with LED bulbs.

9. Troubleshooting

9.1. Switch Not Responding / Indicator Light Issues

  • Check Power: Ensure the power is on at the circuit breaker.
  • Reset: Long press any button on the switch for 10 seconds to reset it to factory defaults. Then attempt to re-pair with the app.
  • Wiring Check: Verify all wire connections are secure and correctly matched according to the chosen wiring diagram (neutral or no-neutral).
  • Capacitor (No Neutral Setup): If you are using the no-neutral wiring, ensure the capacitor is correctly installed. Incorrect installation can lead to flickering or non-responsive lights.

9.2. App Connectivity Issues

  • Wi-Fi Band: Confirm your Wi-Fi network is 2.4GHz. The switch does not support 5GHz Wi-Fi.
  • Bluetooth: Ensure Bluetooth is enabled on your phone during the pairing process.
  • App Restart: If the device doesn't appear in the app during pairing, try restarting the Smart Life app.
  • Router Distance: Ensure the switch is within a reasonable range of your Wi-Fi router.

9.3. Noise / Humming

  • The switch should operate silently. If you hear noise, check the load connected to the switch. Ensure the load (e.g., LED bulbs) is within the specified wattage range (5-200W/gang for LED).
  • In no-neutral setups, ensure the capacitor is correctly installed, as it helps stabilize the circuit.

10. Warranty and Support

This Chevolink Smart WiFi+BLE Light Switch comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For technical support or warranty claims, please contact the seller or refer to the full user manual for detailed terms and conditions.

Full User Manual (PDF): View User Manual (PDF)

11. Frequently Asked Questions (FAQ)

Q: Does this switch support parallel connection?
A: Yes, it supports wireless parallel key programming through the app, allowing multiple switches to control the same light.
Q: Does it work with LED bulbs?
A: Yes, the switch is compatible with LED bulbs, with a maximum load of 5-200W per gang.
Q: Is the touch panel made of glass or plastic?
A: The touch panel is made of glass, providing a sleek and durable finish.
Q: Can I use it with an iPhone?
A: Yes, the Smart Life app is available for iOS devices, including iPhones.
Q: Does the switch make noise?
A: The switch is designed for silent operation. If you experience noise, please check the load and wiring, especially the capacitor in no-neutral setups.
Q: Do I need a neutral wire for installation?
A: The switch supports both neutral wire and no-neutral wire installations. For no-neutral setups, a capacitor is included and must be installed correctly.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.